Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
This zinc-plated mild steel L-Arm from Miller Industries fits the wheel lifts
on Century 3212 and Holmes 600R heavy-duty wreckers. Otherwise known as a tire
restraint or wheel retainer, this adjustable L-Arm fits the crosstubes on your
choice of the driver or passenger side. The driver side (12-0803641) part can
be used to replace Part No. (12-0904186). The passenger side (12-0803642) can
be used to replace Part No. (12-0904187).
Note: Special Handling Fees Apply for Specific Items
This alloy pivot-style L-Arm from Miller Industries fits Formula 1 and Formula
6500 wheel lifts on Century 400 and 600 Series and Challenger 4700 and 4800
Series wreckers. Also known as a tire restraint or wheel retainer, this
aluminum L-Arm fits 2" x 3" outer crosstubes and features a scoop style tire
pan. The drivers side part can be used to replace Part Nos.: 12-0803648 and
12-0903489 and the passenger side part can be used to replace Part Nos.:
12-0803649 and 12-0903490.
Option of driver or passenger position
Fits 2" x 3" outer crosstubes
Pivot style receivers
Alloy construction
Scoop style tire pan
4,000-lb. capacity
Driver side (12-0904156) replaces Part Nos.: 12-0803648 and 12-0903489
Passenger side (12-0904157) replaces Part Nos.: 12-0803649 and 12-0903490
With a unique lens shape and patented Linear-LEDr designed reflector assembly,
M Series lightheads are completely illuminated for unmatched high intensity
warning and low current consumption, your choice of single color lens and
single color LEDs, or clear lens with split color LEDs.
Phoenix electrical junction blocks are high-quality, easy-to-use terminal
blocks that allow you to connect multiple electrical sources in your car,
truck, trailer, or RV. They feature a two-piece design and are available with a
range of poles to accommodate a variety of wiring requirements. These blocks
ensure that your wires stay in place and don't contact other leads, keeping all
of your electrical devices organized and safe from short circuiting.
This Tie-Down Assembly from Miller Industries comes with a ratchet, d-ring, and
flat hook with a safety latch. It is used on the Wheel Lift Assembly of Century
20 Series Car Carriers. See the features below for a full list of carriers and
see the brochure tab for breakdowns.
This Tie-Down Strap from Miller Industries is used on the Wheel Lift Assembly
of Century 20 Series Car Carriers. See the features below for a full list of
carriers and see the brochure tab for breakdowns.
This 90 degree elbow quick-connect fitting works well with the International Pro Star truck models. It connects to the air supply line on the driver side, inside of the frame rail.
Tork Advanced ShopMax Wiper 450 Center-feed shop towels are highly absorbent, offering excellent wipe-dry capabilities. Their strong construction offers durability and the self-dispensing pop-up box offers controlled dispensing. They contain 85% paper content (60% recycled, 40% postindustrial) and 15% synthetic emulsion. Sold in a box of 200.
Premium quality primary wire cable manufactured to meet or exceed ATA
specifications. Color coded PVC cover resists weather and protects the
individual color coded, annealed copper conductor strands. Commonly used to
install or repair marker/ID light circuits.
Premium quality trailer wire cable manufactured to meet or exceed ATA & SAE
specifications. Neoprene insulation resists all weather and protects the
individual color coded, annealed copper conductor strands.
Phoenix Replacement Centering Spacer for the Rear Wheel Liners in the NH252 and
NH552 Simulator Sets. Simulator Set NH252 Fits 22.5", 10 Lug, 2 HH Wheels and
Simulator Set NH552 Fits 22.5" 10 Lug on 285MM Bolt Circle Wheels.
Hub Cover Clip Only for an 8" Stainless Steel Baby Moon Wheel Cover That Fits
Tow Dolly Wheels, as well as Many Standard Golf Cart Wheels (Part #R2512).
This stud-mount kit lets you easily mount a Whelen light bar to any flat
surface. It includes hardware and two feet that easily slide into the channel
on the bottom of light bar. Adjust the mount by sliding back and forth through
the light bar channel. It raises the light bar 1-1/4" off the surface.
This stud-mount kit lets you easily mount a Whelen light bar to any flat
surface. It includes hardware and two feet that easily slide into the channel
on the bottom of light bar. Adjust the mount by sliding back and forth through
the light bar channel. It raises the light bar 1-1/4" off the surface.
Phoenix simulator tools make installing and removing your wheel simulators
easier. For use with simulator kits with a 41mm hex jam nut and 1-3/8" O.D.
slotted stud extenders.
Phoenix Replacement Spacer for GDG01 & NST06 Simulator Sets. GDG01 Simulator
Set is a D.O.T. Liner for 16", 8 Lug Single or Dual Wheel, Which Fits
'03-Current Chevy/GMC '03-Current G2500/G3500 & '01-'06 C/K 3500 2WD/4WD. The
NST06 Simulator Set is a D.O.T. Liner For 16" Single Trailer Wheels.
Phoenix Replacement Centering Spacer for the Rear Wheel Liners in the NH252 and
NH552 Simulator Sets. Simulator Set NH252 Fits 22.5", 10 Lug, 2 HH Wheels and
Simulator Set NH552 Fits 22.5" 10 Lug on 285MM Bolt Circle Wheels.
Hub Cover Clip Only for an 8" Stainless Steel Baby Moon Wheel Cover That Fits
Tow Dolly Wheels, as well as Many Standard Golf Cart Wheels (Part #R2512).
This stud-mount kit lets you easily mount a Whelen light bar to any flat
surface. It includes hardware and two feet that easily slide into the channel
on the bottom of light bar. Adjust the mount by sliding back and forth through
the light bar channel. It raises the light bar 1-1/4" off the surface.
This stud-mount kit lets you easily mount a Whelen light bar to any flat
surface. It includes hardware and two feet that easily slide into the channel
on the bottom of light bar. Adjust the mount by sliding back and forth through
the light bar channel. It raises the light bar 1-1/4" off the surface.
Phoenix simulator tools make installing and removing your wheel simulators
easier. For use with simulator kits with a 41mm hex jam nut and 1-3/8" O.D.
slotted stud extenders.
Phoenix Replacement Spacer for GDG01 & NST06 Simulator Sets. GDG01 Simulator
Set is a D.O.T. Liner for 16", 8 Lug Single or Dual Wheel, Which Fits
'03-Current Chevy/GMC '03-Current G2500/G3500 & '01-'06 C/K 3500 2WD/4WD. The
NST06 Simulator Set is a D.O.T. Liner For 16" Single Trailer Wheels.