Washer, Flat, 3/8"

In stock

Price: $3.79

SKU: 12-0400480

Qty:

View Cart

Qualifies for Free Shipping
with $199.00 minimum order

Description

This General Purpose Flat Washer can be used on most Miller Carrier and Wrecker assemblies, including Century, Challenger, Champion, Eagles, Holmes, and Vulcan. Flat washers are typically used under the head of a bolt of nut to distribute the forces applied when tightening. The zinc plating greatly decreases the corrosion rate. Please refer to the Parts Schematics page for lists of breakdowns.

Bolt Size: 3/8"
Zinc Plated
Inner Diameter: 0.438"
Made from St eel
Thickness: 0.083"
Outer Diameter: 1"
Product Dimensions: 1"L x 1"W x 0.1"L
Inside Diameter: 0.45"
Outside Diameter: 1"
Replaces part number: 9045255

Related Schematics

Customers who bought this item also bought

Pipe Plug, Socket Head, 1", Vulcan

This 1" NPT Socket Head Pipe Plug is used on the crossbar and outer crosstube assembly of several Vulcan Wreckers. It is also used on a Vulcan Car Carrier and a Holmes Wreckers. Please see the features below for a list of trucks and see the brochure tab for breakdowns. This Pipe Plug replaces the Miller Part Number 9012944.

$4.69

Washer, Split Lock, 3/8"

Split Lock Washers provide a positive locking action. The spring like take-up compensates for loosening caused by slight material wear. This split lock washer has a size of 3/8" and a thickness of .094".

$5.49

3/8-16 Nylok Hex Nut Zinc

This is a 3/8-16 nylok hex nut zinc.

$5.49

Miller Detent Spring

This Detent Spring from Miller Industries is used in the assembly of crossbars, outer crosstubes, underlifts, wheel lifts, and crossbeams of many different car carriers and wreckers. These include Century, Holmes, and Vulcan Wreckers, as well as, a Vulcan Car Carrier. See the brochures tab for a complete list and part breakdowns.

$23.99

Miller 1" Chrome Ball

This 1" Chrome Ball from Miller Industries is used on many assembly applications, including crossbar, outer crosstube, underlift, wheel lift, and crossbeam assembly. These assemblies are for Century, Holmes, and Vulcan Car Carriers, as well as Vulcan Wreckers. See the brochure tab for a full list of assemblies and part schematics.

$14.69

WASHER, HEAVY LOCK 3/8

This part can be used to replace Part Number, 12-0400482.

$0.19

Fastenal 1/4" - 28 Grease Fitting w/ Ball Check

This straight grease fitting is used to dispense grease into a mating part using a grease gun. It is made from steel with a zinc finish and comes with a ball check. This part has replaced part number

$0.29

Miller Retaining Ring, 1-1/2"

This 1-1/2" Retaining Ring from Miller Industries is used on many different assemblies including boom, Subframe, recovery boom, wheel lift boom, underlift, dual and single winch extendable boom, and dual and single winch non-extendable boom assemblies. These assemblies can be found on many Century, Challenger, Champion, Eagle, Holmes, and Vulcan Wreckers. See the brochures tab for a full list of assemblies and part schematics.

$7.49

3/8-16X1 Hhcs Gr5 Zp.

This is a 3/8-16 X 1 Hhcs Gr5 Zp. from Miller Industries.

$5.29

Miller Wheel Lift Spacer Bar Century / Holmes / Vulcan

These are the spacer bars of the wheel lift on many light duty wreckers and a few medium duty wreckers by Miller Industries. They are located on the top, inside of the outer stinger and the top, outside of the inner stinger. These spacer bars will fit the following wreckers: Century Modular Express 300 Series, Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes 440SL, 600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder, Modular 880/890, and V-30. See Brochures for reference charts. Each pad is sold separately.

$23.09

Vulcan External Retaining Ring, 1-1/4"

1-1/4" External retaining ring that is used with the extend cylinder pin (

$3.59

Miller Wheel Lift Wear Pad Cage Plate 804 / 6 / 7 211 / 300S and 440SL

This is the cage plate of the wheel lift on the Vulcan 804/806/807, Century 211/300 Series, and Holmes 440SL by Miller Industries. They are located on the top, inside of the outer stinger. See Brochures for reference chart.

$41.99

Miller Pin Weldment, Crossbar Pivot, Century and Vulcan

The Crossbar Pivot Pin Weldment from Miller Industries is used on the Underlift Assembly of Century 3212, Vulcan V30 and Holmes 600R Wreckers. This Pin has actually replaced part number 3012-801100, which was used on the Century 3212 and Vulcan V30 Wreckers. Please see the brochure tab for breakdown schematics.

$237.99

Century Wheel Lift Inner Tube Wear Pad 6" x 1.5" Holmes and Vulcan

This is a nylatron wear pad by Miller Industries. It measures 6" x 1-1/2" x 3/8". It will fit the following wreckers: Century Modular Express 300 Series, Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes 440SL, 600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder, Modular 880/890, and 896/897. See Features for related parts and Brochures for reference charts.

$10.59

Miller Rubber Stop Century 300 Series and Vulcan 807 / 810

This Rubber Stop from Miller Industries is used on the boom assembly of Vulcan 810 Intruders, Vulcan 807R and Century 301, 301M, 311 and 312 Wreckers.

$40.99

O Ring, 1 ID x 1, 1/4 OD x 1/8 D

This is a black, nitrile o ring. It measures 1 ID x 1, 1/4 OD x 1/8 diameter. It is 70 durometers with a tolerance of .003. It has an actual inner diameter of 0.984", an actual outer diameter of 1.262", and a cross section size of 0.139". It is used for hydraulic applications. It weighs 0.27 lbs. It has a nominal inner diameter of 1", and a nominal outer diameter of 1-1/4".

$0.37

Washer, Vulcan Pivot Pin Retaining

The Vulcan pivot pin retaining washer is used with the

$12.99

Miller Wear Pad Wheel Lift Outer Stinger Vulcan 800 Series

This is a wheel lift wear pad for the inside, bottom of the outer stinger on Vulcan 800 Series Wreckers by Miller Industries. This wear pad will fit on the following models: Vulcan Modular 880/890, 880/890, 806, 896/897. See Features for related parts and Brochures for reference charts. This part can be used to replace Part Number, 9100112.

$21.19

Vulcan Wheel Lift Pivot Pin 3" Pin '05 and Older

This is a crossbar pivot pin for a 3.5" Vulcan Crossbar

$55.99

Century Outer Stinger Spacer Bar Vulcan 800 Series

This is a spacer bar that is located on the top, inside of the wheel lift outer stinger weldment by Miller Industries. This spacer bar will fit on the following wreckers: Vulcan 880/890, 805, 806, Modular 880/890, 896/897. See features for related hardware and see brochures for reference charts.

$41.99