This is a replacement plunger pin kit, pivot L-arm for Century.

This pivot-style L-Arm assembly from Miller Industries is designed for the Century Formula 6500 wheel lift. This kit fits 3-1/2 square crossbars and includes black painted steel crosstubes and alloy L-Arms for each side. The swivel arm is held in place with a removeable pin, and each L-Arm is secured with a separate underneath pin and spring plunger. Also known as a tire restraint or wheel retainer, this L-Arm with a scoop-style tire pan offers a 4,000-lb. weight rating as a pair. This assembly can be upfitted to a 6,000-lb. rating with the 12-0904186 & 12-0904187 steel L-arms.

This pivot-style L-Arm assembly from Miller Industries is designed for the Century Formula 1 wheel lift. This kit fits 3 square crossbars and includes black painted steel crosstubes and alloy L-Arms for each side. The swivel arm is held in place with a removeable pin, and each L-Arm is secured with a separate underneath pin and spring plunger. Also known as a tire restraint or wheel retainer, the L-Arms offer a 4,000-lb. weight rating as a pair. This assembly can be upfitted to a 6,000-lb. rating with the 12-0904186 & 12-0904187 steel L-arms.

This pivot-style L-Arm assembly from Miller Industries is designed for the Century Formula 1 wheel lift. This kit fits 3 square crossbars and includes painted black steel crosstubes and alloy scoop L-Arms for each side. The swivel arm is held in place with a removeable pin, and each L-Arm is secured with a separate underneath pin and spring plunger. Also known as a tire restraint or wheel retainer, this aluminum L-Arm offers a 4,000-lb. weight rating as a pair.

Outer Crosstube assembly, right hand, New style "Pivot-L" with line-up pin, designed for Vulcan 890 Series. Accepts 12-0904157 light weight aluminum L-arm. This part can be used to replace Part Number 12-0902791.

Outer Crosstube assembly, right hand, New style "Pivot-L" with line-up pin, designed for Vulcan 890 Series with 4"x4" crossbar. Accepts 12-0904157 light weight aluminum L-arm. This part can be used to replace Part Number 12-0902791.

Note: Special Handling Fees Apply

This Century style wheel grid features a T-handle screw-in style plunger pin to hold the Century style L-arm wheel retainer in place. This crosstube is designed to fit on a 3" x 3" wheel lift crossbar. Fits: Century and Champion 10 Series Car Carriers by Miller.

• Dimensions: 25 1/2" x 3 3/4" x 8
• Shop for the left hand version of this Outer Cross Tube, 12-0905094
  
  Fits:
  
  
• Century 10 Series Carriers
• Champion 10 Series Carriers

Note: Special Handling Fees Apply

This Century style wheel grid features a T-handle screw-in style plunger pin to hold the Century style L-arm wheel retainer in place. This crosstube is designed to fit on a 3" x 3" wheel lift crossbar. Fits: Century and Champion 10 Series Car Carriers by Miller.

• Thumbscrew to Hold Wheel Grid On
• Cam Lock to Lod L-Arm In
• 2 Hooks for Ratchet & Strap Style Hold-Down (for Safety Chains)
• Shop for the right hand version of this Outer Cross Tube, 12-0905095
  
  Fits:
  
  
• Century 10 Series Carriers
• Champion 10 Series Carriers

Replacement pivot lock pin with attachment cable for Century new style "Pivot-L" wheel grids. This part can be used to replace Part Numbers: 12-0714415 and 12-0904140.

This is the boom pivot pin for a Century Formula I 411/412 by Miller Industries. See Brochures for a reference chart and features for related parts.

This is a Pivot Pin for the Swing L-Arm on a Wheel Lift Assembly. It is from Miller Industries.

This is the clevis pin for the Swing L-Arm cylinder on the Century Express 300 Series, Holmes 440SL and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This clevis pin measures 5/8" x 1.5". This pin is used to connect the swing L-arm cylinder to the swing L-arm. To see which specific models this pin fits please see Features below. To view part schematics click on the Brochure tab.

Note: Special Handling Fees Apply

Miller Crossbar used on Century F6500 Wheel Lifts and also on Holmes DFT 650 Wheel Lifts. This crossbar measures 3.5" x 3.5" x 56" long. It has slightly different Bolt Pattern than the early style crossbar. Pivot Pin needed for this crossbar is Part Number 12-0805858. The 5/8" Bolts required for this crossbar are part number 12-0716576. This part can be used to replace Part Number 12-0802951.

• 3.5" x 3.5" Crossbar for Century F6500 Wheel Lift & Holmes DFT 650 Wheel Lift
• Has different style bolt pattern
• Requires 5/8" Bolts
• Accepts 12-0901406 & 12-0901407 standard 3500lbs l-arm cross tubes
• Also accepts 12-0904690 & 12-0904691 medium duty 6000lbs l-arm cross tubes
• Also accepts 12-0904158 & 12-0901459 pivot style cross tubes

Also known as: wheel grid, slide bar, or Outer Crosstube, this left outer crosstube assembly will fit a 3" x 3" square crosstube. It has a cam lock to hold the wheel grid onto the crossbar, a black knob plunger pin to hold the L-Arm in, and 4 hooks for a basket strap style hold down. This crosstube fits the following wrecker models: Century Formula I & Holmes DFT-400. It also will fit Century & Champion 10 Series Carriers. It accepts part number 12-0903479 standard 3,500 lbs. L-Arm. This part can be used to replace Part Number 12-0800912.

This is the wrecker frame base for a Century Formula I 411 by Miller Industries. See Brochures for a refrence chart and Features for related parts.

Note: Special Handling Fees Apply

This is a crossbar for a Century Formula I Wheel Lift Assembly. It will fit Formula I Wheel Lifts that were built in 1996 or newer. It uses a WL-300K3 pivot pin kit.

• 3" x 3" square tube
• Used on Formula I wheel lifts after March 1996
• Accepts 12-0902456 & 12-0902457 standard l-arm outer crosst ubes
• Also accepts 12-0904152 & 12-0904153 pivot l-arm outer crosstubes
• Uses WL-300DK1 detent ball kit
• Length: 53"
• Width: 4"
• H eight: 9.25"

This Cotter Pin from Miller Industries is used on the Winch Clutch Control of 4-Ton Hydraulic Winches,

This Inner Crosstube Weldment from Miller Industries uses a 3" x 3" square tube and has a built in trailer ball plate. It is used in the wheel lift and slide-in tire restraint assembly on Century, Challenger, Champion, Holmes, and Vulcan Car Carriers. See the brochure tab for a list of breakdowns.

Note: Special Handling Fees Apply

Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube Assembly from Miller Industries is a complete right hand assembly. This cross tube is used on the outer cross tube and 3-way pivot tire restraint assembly of Century and Century LCG Carriers, and Vulcan LCG Wreckers. It fits 3.5" x 3.5" square tubes and it accepts Right Hand Tire Restraint L-Arm, 12-0904156. Also, shop for the left hand version of this Outer Crosstube, 12-0909499L, by clicking here. Please see the brochure tab for a list of assemblies and breakdowns.

• New style Century "Pivot-L" with line-up pin
• Get the left hand version of this Outer Crosstube, 12-0909499R, by clicking here
  
  Fits
  
  
• 2005-Current Century 10 Series Steel & Aluminum Carriers
• 2009-Current Century LCG 12 Series Steel and Aluminum Carriers
• 2009-2014 Century LCG 16 Series Steel & Aluminum Carriers
• 2009-Current Vulcan LCG 12 Series Steel & Aluminum Carriers
• 2009-Current Vulcan LCG 16 Series Steel & Aluminum Carriers

Miller Crossbar, Century Formula wheel lift and Century & Champion carrier wheel lifts, uses WL-300K2 pivot pin kit. Fits 1996 and older Century wreckers and 2002 and older Century and Champion Car Carriers. Use 12-0803238 for newer models.

Note: Special Handling Fees Apply

Also known as a wheel grid, or slide bar, this right hand outer crosstube with a line up pin from Miller Industries fits 3" x 3" square tubes. It is used on the outer crosstube and pivot assembly of Century Car Carriers and Wreckers. It can also fit Century Formula I Wreckers, Holmes DFT-400 Wreckers, and Champion 10 Series Car Carriers. This crosstube accepts a Right Hand L-Arm Tire Restraint 12-0904157. To shop for the left hand version of this receiver, 12-0904152, click here. Please see the brochures tab for assemblies and breakdowns. This part can be used to replace Part Number 12-0902897.

• New style Century "Pivot-L" with line-up pin
• Get a left hand version of this receiver, 12-0904152, by clicking here
• Accepts a Right Hand L-Arm Tire Restraint 12-0904157
  
  Fits:
  
  
• 2001-2004 Century 10 Series Carriers
• 2002-2005 Century 15 Series Carriers
• 2009-Current Century Modular 400 & 600 Wreckers
• Century Formula I Wreckers
• Champion 10 Series Carriers
• Holmes DFT-400 Wreckers

Note: Special Handling Fees Apply

Also known as a wheel grid, or slide bar, this left hand outer crosstube with a line up pin from Miller Industries fits 3" x 3" square tubes. It is used on the outer crosstube and pivot assembly of Century Car Carriers and Wreckers. It can also fit Century Formula I Wreckers, Holmes DFT-400 Wreckers, and Champion 10 Series Car Carriers. This crosstube accepts a Left Hand L-Arm Tire Restraint 12-0904156. To shop for the right hand version of this receiver, 12-0904153, click here. Please see the brochures tab for assemblies and breakdowns. This part can be used to replace Part Number 12-0902896.

• New style Century "Pivot-L" with line-up pin
• Get a right hand version of this receiver, 12-0904153, by clicking here
• Accepts a Left Hand L-Arm Tire Restraint 12-0904156
  
  Fits:
  
  
• 2001-2004 Century 10 Series Carriers
• 2002-2005 Century 15 Series Carriers
• 2009-Current Century Modular 400 & 600 Wreckers
• Century Formula I Wreckers
• Champion 10 Series Carriers
• Holmes DFT-400 Wreckers

This 3.5" x 3.5" square tube Crossbar from Miller Industries is used in the wheel lift assembly of Century 20 Series Car Carriers. It can also be used on Century Formula 6000 and Formula II Wheel Lifts with one piece pivot pins. See the brochure tab for a list of breakdowns.

Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube Assembly from Miller Industries is a complete left hand assembly. This cross tube is used on the outer cross tube and 3-way pivot tire restraint assembly of Century and Century LCG Carriers, and Vulcan LCG Wreckers. It fits 3.5" x 3.5" square tubes and it accepts

Also known as a wheel grid, slide bar, or receiver this 3.5" Outer Cross Tube from Miller Industries is a complete Left Hand assembly. This new style "Pivot-L" has a line-up pin and fits 3.5" x 3.5" square tubes. The cross tube fits Century, Champion, and Vulcan Car Carriers. It will accept a left hand

Also known as a wheel grid, slide bar, or receiver this 3.5" Outer Cross Tube from Miller Industries is a complete Right Hand assembly. This new style "Pivot-L" has a line-up pin and fits 3.5" x 3.5" square tubes. The cross tube fits Century, Champion, and Vulcan Car Carriers. It will accept a right hand