Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
This round, push in style light can be used as a license plate light or a control panel light. It is commonly used on the Mounting and Tilt Frame Assembly of several Miller Car Carriers, including Century, Challenger, Champion, Holmes, and Vulcan. See the features below for a list of assemblies and see the brochure tab for breakdowns. This part can be used to replace Part Number 12-0300867.
Buyers Products 5 Inch Incandescent Flood Light has a sealed rubber housing and
a blunt cut connection. It sits on a zinc-plated mount and has a 10 in. lead
length. The 35W light is IP67 rated for water and dust resistance.
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
Howes Lubricator heavy-duty, multi-purpose Lubricator and Penetrating Oil is guaranteed to loosen rusted nuts and bolts. The lubricant can be sprayed on wires, leads and distributor caps and is safe to use on almost any surface.
This zinc-plated mild steel L-Arm from Miller Industries fits the wheel lifts
on Century 3212 and Holmes 600R heavy-duty wreckers. Otherwise known as a tire
restraint or wheel retainer, this adjustable L-Arm fits the crosstubes on your
choice of the driver or passenger side. The driver side (12-0803641) part can
be used to replace Part No. (12-0904186). The passenger side (12-0803642) can
be used to replace Part No. (12-0904187).
Note: Special Handling Fees Apply for Specific Items
This alloy pivot-style L-Arm from Miller Industries fits Formula 1 and Formula
6500 wheel lifts on Century 400 and 600 Series and Challenger 4700 and 4800
Series wreckers. Also known as a tire restraint or wheel retainer, this
aluminum L-Arm fits 2" x 3" outer crosstubes and features a scoop style tire
pan. The drivers side part can be used to replace Part Nos.: 12-0803648 and
12-0903489 and the passenger side part can be used to replace Part Nos.:
12-0803649 and 12-0903490.
Option of driver or passenger position
Fits 2" x 3" outer crosstubes
Pivot style receivers
Alloy construction
Scoop style tire pan
4,000-lb. capacity
Driver side (12-0904156) replaces Part Nos.: 12-0803648 and 12-0903489
Passenger side (12-0904157) replaces Part Nos.: 12-0803649 and 12-0903490
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
Our popular SL-9 magnetic tow light kit comes with two sealed beam truck lights
in a rubber housing, plastic-housed magnets, and 30' of 4 - wire cable all
pre-wired into the male plug. The kit also includes a plastic carrying case
and the female plug. The flexible cable is 16 gauge wire with "Yukon Weather
Proven" outer and inner jackets.
Option of amber or clear bulb.The Neutral White, High Intensity 12V, 180 Degree
Illumination Landscape, Park Light, Number, License Plate Light, Trunk Light,
Instrument/Gauge Light, Side Light 35 x Longer Life Time Compared with
Traditional Incandescent Bulbs. Plus Less Heat Output and Extremely Low Power
Consumption.
This 22" Wireless Tow Light from TowMate is known as the "Lime Light" because
of its lime color. The Lime Light is TowMate's best-selling wireless tow light.
It has 14 LED's that provide stop, turn, and tail signals wirelessly. This
basic unit is not compatible with an I-Mon reminder system. It comes with two
90 lb. pull magnets that have rubber boots, making it easy to mount just about
anywhere. Choose from any transmitter at no additional charge. The transmitter
options include 4-PIN Round (Standard), 4 PIN Flat, 6 PIN Round, 7 PIN Round, 7
PIN RV Style, and a Hardwire Transmitter. If you're looking for style, savings,
and dependability, then this tow light is for you.
This Pivot Pin Kit is for use with Vulcan 804, 831, 860, 870 and 880 Wrecker
Wheel Lifts. This kit also fits all Vulcan Car Carrier Wheel Lifts and
Century/Champion 10 Series Car Carrier Wheel Lifts built in 2002 or newer with
a Vulcan style crossbar. This Kit has a 1-1/4" diameter pivot pin that is held
in place with an allen head bolt and washer on the top.
Drive Screws are designed for heavy duty fastening because they are strong and
durable. The zinc plating helps these screws last long because they slow the
corrosion rate. This 1/2" x 10 Drive Screw from Miller Industries is used
primarily on the Aluminum Bed Assembly of several Miller Car Carriers. It is
also used on the Wheel Lift Assembly of Champion and Vulcan Carriers.
This is a bronze bushing for an Eagle Best-Lift Forklift Attachment. This bushing is used where the claws of the forklift attachment mounts to the crossbar. You will need two, one for the driver side claw and one for the passenger side claw. The dimensions of this bushing are 3" long with a 1-1/4" outside diameter and a 1" inside diameter. This part can be used to replace Part Number E300002.
Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete right hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the left hand version of this Cross Tube,
Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete left hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the right hand version of this Cross Tube,
This is a replacement L-arm claw pivot pin weldment used on the wheel lift of
the Century Modular Midnight Express and the Holmes 220 Snatcher and 440SL
light duty wreckers by Miller Industries. This is the pin that allows the L-arm
to pivot on the crossbar which secures the tire of towed vehicle. To view the
part schematics please click on the Brochure tab above.
Note: Special Handling Fees Apply for Specific Items
This alloy pivot-style L-Arm from Miller Industries fits Formula 1 and Formula
6500 wheel lifts on Century 400 and 600 Series and Challenger 4700 and 4800
Series wreckers. Also known as a tire restraint or wheel retainer, this
aluminum L-Arm fits 2" x 3" outer crosstubes and features a scoop style tire
pan. The drivers side part can be used to replace Part Nos.: 12-0803648 and
12-0903489 and the passenger side part can be used to replace Part Nos.:
12-0803649 and 12-0903490.
Option of driver or passenger position
Fits 2" x 3" outer crosstubes
Pivot style receivers
Alloy construction
Scoop style tire pan
4,000-lb. capacity
Driver side (12-0904156) replaces Part Nos.: 12-0803648 and 12-0903489
Passenger side (12-0904157) replaces Part Nos.: 12-0803649 and 12-0903490
This Wheel Grid Assembly from Miller Industries is a right hand assembly that fits 3.5" x 3.5" square tubes. The wheel grid has a Vu
lcan patented strapless system that is used on the Crossbar and Outer Crosstube Assembly of Vulcan 804, 806, 870, and 880 wheel lift
s, as well as Vulcan Car Carriers. This wheel grid accepts L-Arm 8700180. Click here for the left hand version of this wheel grid 8800800.
This zinc-plated mild steel L-Arm from Miller Industries fits both sides of the
wheel lift on Century, Champion, Holmes and Vulcan car carriers. Otherwise
known as a tire restraint or wheel retainer, this adjustable L-Arm slides into
the outer crosstube for a secure tire rest.
Driver or passenger position
Zinc-plated mild steel
Adjustment holes
2" x 2" x 31.86"
Fits:
2001-Current Century 10 Series Steel & Aluminum Carriers
2009-Current Century LCG 12 Series Steel & Aluminum Carriers
2002-Current Century 15 Series Steel & Aluminum Carriers
2009-2014 Century LCG 16 Series Steel & Aluminum Carriers
2006-Current Century 20 Series Steel & Aluminum Carriers
This zinc-plated slide-in L-Arm fits the wheel lifts on various
models of Century, Holmes and Challenger wreckers and Century, Champion,
Challenger and Vulcan car carriers.
Note: Special Handling Fees Apply for Specific Items
This zinc-plated mild steel L-Arm from Miller Industries fits the Vulcan 10
Series car carriers and 800 Series light-duty wheel lifts with option of driver
or passenger side fit. Sometimes called a tire restraint or wheel retainer, the
2 x 2.5 tube is designed to work with the driver side outer crosstube 8800900.
This strapless system offers a Working Load Limit of 4,000 lbs. This scoop also
features adjustment holes for proper tire fitment and a grated pan for improved
grip.
2 x 2.5 aluminum tube
Opton of driver or passenger positioning
Adjustment holes
Grated scoop tire pan
Use with 8800900 outer crosstube
WLL: 4,000 lbs.
Fits:
2003-Current Vulcan 10 Series Steel & Aluminum Carriers
2001-Current Vulcan 10 Series Extreme Angle Steel Carriers
Note: Special Handling Fees Apply for Specific Items
This painted steel L-Arm from Miller Industries fits the wheel lifts on various
models of Century, Holmes and Vulcan wreckers. Otherwise known as a tire
restraint or wheel retainer, this L-Arm fits the crosstubes on the driver side.
This part can be used to replace Driver Side Part Nos. 12-00803911 and
12-0803911 & Passenger Side Part Nos.12-00803912 and 12-0803912.
Option of driver or passenger position
Painted steel
Driver side (12-0806978) replaces driver side Part Nos. 12-00803911 and
12-0803911
This is a front stop pin assembly for the scoop bracket weldment on Light Duty Vulcan Wreckers by Miller Industries. This stop pin w
ill fit the following models: Vulcan Modular 804, Modular 806, and Modular 880/890. It works for both sides of the wrecker. This par
t can be used to replace Part Numbers: 8621400 and 880411500.
This is a bronze bushing for an Eagle Best-Lift Forklift Attachment. This bushing is used where the claws of the forklift attachment mounts to the crossbar. You will need two, one for the driver side claw and one for the passenger side claw. The dimensions of this bushing are 3" long with a 1-1/4" outside diameter and a 1" inside diameter. This part can be used to replace Part Number E300002.
Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete right hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the left hand version of this Cross Tube,
Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete left hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the right hand version of this Cross Tube,
This is a replacement L-arm claw pivot pin weldment used on the wheel lift of
the Century Modular Midnight Express and the Holmes 220 Snatcher and 440SL
light duty wreckers by Miller Industries. This is the pin that allows the L-arm
to pivot on the crossbar which secures the tire of towed vehicle. To view the
part schematics please click on the Brochure tab above.
Note: Special Handling Fees Apply for Specific Items
This alloy pivot-style L-Arm from Miller Industries fits Formula 1 and Formula
6500 wheel lifts on Century 400 and 600 Series and Challenger 4700 and 4800
Series wreckers. Also known as a tire restraint or wheel retainer, this
aluminum L-Arm fits 2" x 3" outer crosstubes and features a scoop style tire
pan. The drivers side part can be used to replace Part Nos.: 12-0803648 and
12-0903489 and the passenger side part can be used to replace Part Nos.:
12-0803649 and 12-0903490.
Option of driver or passenger position
Fits 2" x 3" outer crosstubes
Pivot style receivers
Alloy construction
Scoop style tire pan
4,000-lb. capacity
Driver side (12-0904156) replaces Part Nos.: 12-0803648 and 12-0903489
Passenger side (12-0904157) replaces Part Nos.: 12-0803649 and 12-0903490
This Wheel Grid Assembly from Miller Industries is a right hand assembly that fits 3.5" x 3.5" square tubes. The wheel grid has a Vu
lcan patented strapless system that is used on the Crossbar and Outer Crosstube Assembly of Vulcan 804, 806, 870, and 880 wheel lift
s, as well as Vulcan Car Carriers. This wheel grid accepts L-Arm 8700180. Click here for the left hand version of this wheel grid 8800800.
This zinc-plated mild steel L-Arm from Miller Industries fits both sides of the
wheel lift on Century, Champion, Holmes and Vulcan car carriers. Otherwise
known as a tire restraint or wheel retainer, this adjustable L-Arm slides into
the outer crosstube for a secure tire rest.
Driver or passenger position
Zinc-plated mild steel
Adjustment holes
2" x 2" x 31.86"
Fits:
2001-Current Century 10 Series Steel & Aluminum Carriers
2009-Current Century LCG 12 Series Steel & Aluminum Carriers
2002-Current Century 15 Series Steel & Aluminum Carriers
2009-2014 Century LCG 16 Series Steel & Aluminum Carriers
2006-Current Century 20 Series Steel & Aluminum Carriers
This zinc-plated slide-in L-Arm fits the wheel lifts on various
models of Century, Holmes and Challenger wreckers and Century, Champion,
Challenger and Vulcan car carriers.
Note: Special Handling Fees Apply for Specific Items
This zinc-plated mild steel L-Arm from Miller Industries fits the Vulcan 10
Series car carriers and 800 Series light-duty wheel lifts with option of driver
or passenger side fit. Sometimes called a tire restraint or wheel retainer, the
2 x 2.5 tube is designed to work with the driver side outer crosstube 8800900.
This strapless system offers a Working Load Limit of 4,000 lbs. This scoop also
features adjustment holes for proper tire fitment and a grated pan for improved
grip.
2 x 2.5 aluminum tube
Opton of driver or passenger positioning
Adjustment holes
Grated scoop tire pan
Use with 8800900 outer crosstube
WLL: 4,000 lbs.
Fits:
2003-Current Vulcan 10 Series Steel & Aluminum Carriers
2001-Current Vulcan 10 Series Extreme Angle Steel Carriers
Note: Special Handling Fees Apply for Specific Items
This painted steel L-Arm from Miller Industries fits the wheel lifts on various
models of Century, Holmes and Vulcan wreckers. Otherwise known as a tire
restraint or wheel retainer, this L-Arm fits the crosstubes on the driver side.
This part can be used to replace Driver Side Part Nos. 12-00803911 and
12-0803911 & Passenger Side Part Nos.12-00803912 and 12-0803912.
Option of driver or passenger position
Painted steel
Driver side (12-0806978) replaces driver side Part Nos. 12-00803911 and
12-0803911
This is a front stop pin assembly for the scoop bracket weldment on Light Duty Vulcan Wreckers by Miller Industries. This stop pin w
ill fit the following models: Vulcan Modular 804, Modular 806, and Modular 880/890. It works for both sides of the wrecker. This par
t can be used to replace Part Numbers: 8621400 and 880411500.