This is the main boom of a Vulcan 810 by Miller Industries. See Brochures for a reference chart and Features for related parts.

Wear Pad Kit, Century Formula I, Holmes DFT-400, and Challenger I-400 wheel lifts. Kit includes stinger wear pads, and extend cylinder pins & hardware.

This is the Wheel Lift Tilt Cylinder Lower Pin for the Vulcan 810 Intruder light duty wrecker by Miller Industries. This pin goes through the rod end of the tilt cylinder. This pin attaches the wheel lift tilt cylinder to the wheel lift outer boom weldment. To view the part schematic click on the Brochure tab.

This is the Wrecker Boom Lift Cylinder on the Holmes 440SL, Vulcan 810 Intruder, Vulcan 812 Intruder, and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This cylinder has a 3.5" bore with a 10.44" stroke. This lift cylinder connects to the subframe weldment and to the outer wrecker boom weldment. This is the cylinder that raises the boom of the wrecker up and down. This lift cylinder is also referred to as the boom elevation cylinder. To see which specific models this cylinder will fit please see Features below. To view part schematics click on the Brochure tab.

This is the L-Arm side, Swing L-Arm Cylinder Pin. This pin fits cylinder part number 12-0303844. This pin fits Century, Challenger and Vulcan wrecker models. To view specific models see Features below. To view part schematics click on the Brochures tab.

This is the Wheel Lift Extend Cylinder on Light Duty Wreckers by Miller Industries. This extend cylinder will fit on the following models. The Century 300 Express Series, The Century 300 Modular Express Series, The Challenger 4300 Express Series, The Holmes 440SL Series, The Vulcan Modular 807, The Vulcan 810 Intruder, The Vulcan 812 Intruder, and The Vulcan 810 Power Tilt. To view part schematics click the Brochure Tab.

This is the front extend cylinder pin for the wheel lift extend cylinder on Miller Industries Light Duty Wreckers. It replaced part number 12-0703345. To view what models this pin fits on please see Features below. To view part schematics click on the Brochures tab.

This is the Wheel Lift Extend Cylinder Base End Pin for Century Modular Midnight Express and Modular 211's. This pin also will fit Holmes 440SL, Vulcan Modular 804, 806, and 807 wreckers. It will also work with the Vulcan 810 Power Tilt light duty wrecker by Miller Industries. To view specific models see Features below. To view part schematics click the Brochure tab.

This is the clevis pin for the Swing L-Arm cylinder on the Century Express 300 Series, Holmes 440SL and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This clevis pin measures 5/8" x 1.5". This pin is used to connect the swing L-arm cylinder to the swing L-arm. To see which specific models this pin fits please see Features below. To view part schematics click on the Brochure tab.

This is the Wheel Lift Fold Cylinder for the Wheel Lift on the Vulcan 812 Intruder and Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This cylinder has a 4" bore with a 19.5" stroke. This cylinder attaches to the wrecker outer boom weldment and to the wheel lift outer boom weldment. This is the cylinder that folds the wheel lift up against the boom of the wrecker for travel. To see which specific wrecker models this cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.

This is a 2.5" Wheel Lift Fold Cylinder on Century Modular Midnight Express, Holmes 440SL and Vulcan 810 Intruder light duty wreckers. To view specific wrecker models please see Features below. To view part schematics click on the Brochure tab. This part can be used to replace Part Number, 810700000.

This is the Upper Pin for the Wheel Lift Tilt Cylinder on Century Modular Midnight Express, Holmes 440SL and Vulcan 810 Intruder light duty wreckers by Miller Industries. This pin is used to connect the tilt cylinder to the subframe assembly. To view the specific wrecker models see Features below. To view part schematics click on the Brochures tab.

This is the rear extend cylinder pin for many light duty wreckers by Miller Industries. This pin will work with most Century, Challenger, Champion, Holmes and Vulcan light duty wreckers. This pin measure 6" long with a diamter of 7/8". To view specific wrecker models this pin fits see Features below.

This is the Wheel Lift Extend Cylinder Pin for the wheel lift of many light duty wreckers by Miller Industries. This extend cylinder pin fits the following wreckers: Century Modular 300 Express Series, Century Modular Midnight Express, Century Modular 211, Holmes 440SL, Vulcan Modular 804, 806, and 807, and the Vulcan 810 Power Tilt. This pin measures 5.88" long with a diameter of 7/8". To view specific models and year range for each model see Features below.

This is the Wrecker Boom Lift Cylinder Pin for the Holmes 440SL, Vulcan 805, and Vulcan 810 Series light duty wreckers by Miller Industries. This pin goes through the base end of the lift cylinder. This pin connects the boom lift cylinder to the subframe weldment. To view part schematics click on the Brochure tab.

This is the Wrecker Boom Lift Cylinder Upper Pin for the Vulcan 805, Vulcan 806, Vulcan 807 Auto Grip, and Vulcan 810 Intruder light duty wreckers by Miller Industries. This pin goes through the rod end of the lift cylinder. This pin connects the lift cylinder to the outer wrecker boom weldment. To see which specific wrecker models this cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.

This is the Wrecker Boom Lift Cylinder Pin on the Holmes 440SL, Vulcan 812 Intruder, and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This pin goes through the rod end of the lift cylinder. This pin connects the boom lift cylinder to the main boom of the wrecker. To see which specific models this pin will fit see Features below. To view part schematics click on the Brochure tab.

This is the Wheel Lift Tilt Cylinder Lower Pin for the Vulcan 812 Intruder and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This pin goes through the rod end of the tilt cylinder. This pin attaches the tilt cylinder to the wheel lift outer boom weldment. To see which specific wrecker models this pin will fit please see Features below. To view the part schematics click on the Brochure tab.

This is the Inner Stinger Boom Weldment for the Wheel Lift on a Century 300 Express Series, Challenger 4300 Express, and Vulcan 810 Intruder by Miller Industries. See Brochures for part schematics and Features for related parts and to see what this will fit.

This is a replacement 5 Spool Parker Control Valve for the Vulcan 810 Auto-Load and the Century Modular Midnight Express light duty wreckers by Miller Industries. To view part schematics please click on the brochure tab above. This part can be used to replace part number 12-0306776.

This is the Boom Inner Stinger Weldment for the Wheel Lift on a Century Modular 300 Express Series, Holmes 440SL, Vulcan Modular 807 and 810 Power Tilt by Miller Industries. See Brochures for part schematics and Features for related parts and to see what models this will fit.

This is the Swing L-Arm Cylinder, also known as the Claw Cylinder, for autoload wreckers by Miller Industries. This cylinder will fit Century Express 300 Series, Midnight Express Series, Challenger 4300 Express Series, Holmes 440SL, Vulcan Modular 807, 810 Intruder and 810 Power Tilt Wreckers. To view part schematics click the Brochures tab.