Miller Boom Lift Cylinder 3.5" Bore x 10.44" Stroke Holmes Vulcan

GoJak Dollies are the solution to your automobile positioning problems. GoJaks operate on the principle of a quick action, bi-directional, double-pawl ratchet. Mechanical leverage applied to the foot pedal progressively "squeezes" the vehicle tire between the rollers until the tire lifts smoothly off the ground. The rollers touch only the tire and no contact is made with the vehicles frame or undercarriage. The low center of gravity after lifting helps make these dollies safe and stable in use. The pure mechanical design eliminates the need for electric power, compressed air, or slow hydraulics.

Note: Special Handling Fees Apply for Specific Items

This painted steel L-Arm from Miller Industries fits the wheel lifts on various models of Century, Holmes and Vulcan wreckers. Otherwise known as a tire restraint or wheel retainer, this L-Arm fits the crosstubes on the driver side. This part can be used to replace Driver Side Part Nos. 12-00803911 and 12-0803911 & Passenger Side Part Nos.12-00803912 and 12-0803912.

• Option of driver or passenger position
• Painted steel
• Driver side (12-0806978) replaces driver side Part Nos. 12-00803911 and 12-0803911
  
  Fits:
• 2010 - Current Century Modular Midnight Express
• 2000 - Current Century Midnight Express
• 2007 - Current Century Express 300 Series Modular
• 2009 - Current Holmes 440SL
• 2007 - Current Vulcan Modular 807
• 2000 - Current Vulcan 810 Intruder

Our popular SL-9 magnetic tow light kit comes with two sealed beam truck lights in a rubber housing, plastic-housed magnets, and 30' of 4 - wire cable all pre-wired into the male plug. The kit also includes a plastic carrying case and the female plug. The flexible cable is 16 gauge wire with "Yukon Weather Proven" outer and inner jackets.

Screw pin anchor shackles from Zip's are made from forged alloy steel and feature an open throat design that requires no tools to operate. The shackles are available in seven sizes and are stamped with the size and capacity. See the drop-down menu for available sizes and working load limits.

Zips Endless Round Slings feature a Safety Factor of 5:1. The inner core is made from high-tensile polyester fiber to provide the maximum possible strength. Each sling is color coded according to capacity. See drop down menu for available lengths. See chart for sling capacity.

Note: Special Handling Fees Apply for Specific Items

L-shaped Wheel Lift Arms from Zip's are made from welded steel tube and are designed to replace either the driver side or passenger side of an auto-loading wheel lift on light-duty wreckers from Miller Industries. Powder-coated black for corrosion resistance, the steel composition ensures the arms can withstand the weight and stress of lifting heavy vehicles without compromising their structural integrity.

The design and construction of these wheel lift arms offer stability and leverage during the lifting process. The pivoting end is reinforced to eliminate any sag while clamping the tire, and the L-shape design creates a tight and secure hold on the tires. A locking mechanism prevents accidental release and ensures the safety of the towed vehicle.

Sold individually, these wheel lift arms are designed to fit various tow truck models, including Century Modular, Century Express, Holmes and Vulcan.This compatibility ensures a seamless integration into different towing setups. See the fitment list below to find the specific models of auto-loading wreckers for these wheel lift arms.

• Steel tube construction
• Reinforce pivot point
• Powder-coated black for corrosion resistance
• Passenger or driver side positioning
• L-shape design
• Locking mechanism
• Sold individually

Fitment:
• 2010 - Current Century Modular Midnight Express
• 2000 - Current Century Midnight Express
• 2007 - Current Century Express 300 Series Modular
• 2009 - Current Holmes 440SL
• 2007 - Current Vulcan Modular 807
• 2000 - Current Vulcan 810 Intruder

This is the Wrecker Boom Lift Cylinder Pin for the Holmes 440SL, Vulcan 805, and Vulcan 810 Series light duty wreckers by Miller Industries. This pin goes through the base end of the lift cylinder. This pin connects the boom lift cylinder to the subframe weldment. To view part schematics click on the Brochure tab.

This is the Swing L-Arm Cylinder, also known as the Claw Cylinder, for autoload wreckers by Miller Industries. This cylinder will fit Century Express 300 Series, Midnight Express Series, Challenger 4300 Express Series, Holmes 440SL, Vulcan Modular 807, 810 Intruder and 810 Power Tilt Wreckers. To view part schematics click the Brochures tab.

This is the Wrecker Boom Lift Cylinder Upper Pin for the Vulcan 805, Vulcan 806, Vulcan 807 Auto Grip, and Vulcan 810 Intruder light duty wreckers by Miller Industries. This pin goes through the rod end of the lift cylinder. This pin connects the lift cylinder to the outer wrecker boom weldment. To see which specific wrecker models this cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.

This is the Wheel Lift Extend Cylinder on Light Duty Wreckers by Miller Industries. This extend cylinder will fit on the following models. The Century 300 Express Series, The Century 300 Modular Express Series, The Challenger 4300 Express Series, The Holmes 440SL Series, The Vulcan Modular 807, The Vulcan 810 Intruder, The Vulcan 812 Intruder, and The Vulcan 810 Power Tilt. To view part schematics click the Brochure Tab.

This is a 2.5" Wheel Lift Fold Cylinder on Century Modular Midnight Express, Holmes 440SL and Vulcan 810 Intruder light duty wreckers. To view specific wrecker models please see Features below. To view part schematics click on the Brochure tab. This part can be used to replace Part Number, 810700000.

This is the clevis pin for the Swing L-Arm cylinder on the Century Express 300 Series, Holmes 440SL and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This clevis pin measures 5/8" x 1.5". This pin is used to connect the swing L-arm cylinder to the swing L-arm. To see which specific models this pin fits please see Features below. To view part schematics click on the Brochure tab.

This is a 5/8-11 X 5.5 Flt Hd Sckt Cap screw from Miller Industries.

This is the Wheel Lift Extend Cylinder Pin for the wheel lift of many light duty wreckers by Miller Industries. This extend cylinder pin fits the following wreckers: Century Modular 300 Express Series, Century Modular Midnight Express, Century Modular 211, Holmes 440SL, Vulcan Modular 804, 806, and 807, and the Vulcan 810 Power Tilt. This pin measures 5.88" long with a diameter of 7/8". To view specific models and year range for each model see Features below.

This Bronze Bushing from Miller Industries is used on the Inner Boom of the Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has a 3" inner diameter. See the features below for a full list of carriers. This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.

This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many different Miller Wrecker assemblies. These assemblies include the boom, wheel lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes Wreckers. Please see the brochure for a full list of breakdowns.