0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
FVP Brake Cleaner 13 oz. Can
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
$4.49
Parker Spin On Hydraulic Filter Element
This is our #1 selling filter. It is used on older style 411, 412, 601, 602, 611, 612, 552, 4400, 4800, 301, 311, 312, and 614.
$12.57
Miller Pivot-Style Wheel Lift L-Arm - Formula 1 and 6500 Wheel Lifts
Note: Special Handling Fees Apply for Specific Items
This alloy pivot-style L-Arm from Miller Industries fits Formula 1 and Formula 6500 wheel lifts on Century 400 and 600 Series and Challenger 4700 and 4800 Series wreckers. Also known as a tire restraint or wheel retainer, this aluminum L-Arm fits 2" x 3" outer crosstubes and features a scoop style tire pan. The drivers side part can be used to replace Part Nos.: 12-0803648 and 12-0903489 and the passenger side part can be used to replace Part Nos.: 12-0803649 and 12-0903490.
This alloy pivot-style L-Arm from Miller Industries fits Formula 1 and Formula 6500 wheel lifts on Century 400 and 600 Series and Challenger 4700 and 4800 Series wreckers. Also known as a tire restraint or wheel retainer, this aluminum L-Arm fits 2" x 3" outer crosstubes and features a scoop style tire pan. The drivers side part can be used to replace Part Nos.: 12-0803648 and 12-0903489 and the passenger side part can be used to replace Part Nos.: 12-0803649 and 12-0903490.
- Option of driver or passenger position
- Fits 2" x 3" outer crosstubes
- Pivot style receivers
- Alloy construction
- Scoop style tire pan
- 4,000-lb. capacity
- Driver side (12-0904156) replaces Part Nos.: 12-0803648 and 12-0903489
- Passenger side (12-0904157) replaces Part Nos.: 12-0803649 and 12-0903490
Fits: - Century 400 Series
- Century 600 Series
- Challenger 4700 Series
- Challenger 4800 Series
$540.99
Phoenix 12 Position Junction Box
Phoenix electrical junction blocks are high-quality, easy-to-use terminal
blocks that allow you to connect multiple electrical sources in your car,
truck, trailer, or RV. They feature a two-piece design and are available with a
range of poles to accommodate a variety of wiring requirements. These blocks
ensure that your wires stay in place and don't contact other leads, keeping all
of your electrical devices organized and safe from short circuiting.
$16.19
Truck Star Back Up Alarm
This self-grounding Back-Up Alarm from Truck Star by Buyers has 97 decibels. It
also comes with 12-24 DC.
$25.79
Zips Pivot Pin Kit Wrecker / Carrier 01 and Older Formula I
This is a Pivot Pin Kit for a Century Formula I, Holmes DFT-400, Challenger
I-400 (1996 and older), and Century/Champion 10 Series car carrier wheel lifts
('01 and older). This kit includes one
$190.99
Zips Wheel Lift Pivot Pin Kit Century / Challenger / Holmes Formula I (After 1996)
Pivot Pin Kit, Century Formula I, Holmes DFT-400, and Challenger I-400 wheel
lift. Design built after March 1996 up to August 2000. Includes (1) 12-0801073
Pivot Pin, (1) 12-0303403 Pivot Pin Bushing, (2) 12-0303402 Thrust Washers, and
(2) 12-0701956 Pivot Pin Retaining Bolts.
$222.99
Miller Super Oilite Bushing
This Super Oilite Bushing from Miller Industries is used on the Wheel Lift Assembly of Century Formula 6500/600 Series Wreckers, Century Formula I Wheel Lift 411/611 Wreckers and Challenger 4700 Series Wreckers. See the attached brochures. This part can be used to replace Part Numbers: 12-0301583, 12-0301845, 12-0301382, and 12-0302093.
$13.49
Miller Rod End Wheel Lift Tilt Cylinder Pin Holmes 440 Series
This is the Wheel Lift Tilt Cylinder Pin for the Holmes 440 Series / DFT 400 light duty wreckers by Miller Industries. This pin goes through the rod end of the cylinder. This pin attaches the tilt cylinder to the outer wheel lift boom. To view the part schematic click on the Brochure tab. This part can be used to replace Part Number 12-0801010.
$118.99
Miller Lower Parrallel Arm Pin 411 / 412
This is the weldment pin that connects the outer stinger to the parallel arms
on a Formula I 411/412 by Miller Indstries. See brochure for reference chart.
$199.99
Century Wear Pad 3" x 3" Challenger Champion and Vulcan
This is an inner tube slide pad for the top side of the wheel lift on all
Century, Vulcan, Champion, & Challenger car carriers excluding the LCG Series.
It is also compatible on Vulcan 810 Intruders and Century 411/412 & Midnight
Express. See Features for quantities for each model needed. Each pad sold
separately.
$23.99
Miller Wheel Lift Outer Tube Slide Pad 810 / Midnight Express
This is the outer tube slide pad for the bottom, inside of the wheel lift on
the Vulcan 810 Intruders & Century Midnight Express. See Brochures for
reference chart. Each pad sold separately.
$14.19
Fastenal 1/4" - 28 Grease Fitting w/ Ball Check
This straight grease fitting is used to dispense grease into a mating part using a grease gun. It is made from steel with a zinc finish and comes with a ball check. This part has replaced part number
$0.29
Miller Lift Cylinder Century Challenger Holmes
This is the base lift cylinder pin on the wheel lift of Century, Challenger and
Holmes wreckers by Miller Industries. This pin replaces part number
12-0801012. This cylinder pin will fit the following wreckers: Century Formula
I - Duplex Tilt 411 & 412, Formula I - Duplex Tilt Super Six & 500, Formula
6000 - 600 Series, Formula 6500 - 600 Series, Metro I - Duplex Tilt, Challenger
4700 Series, and the Holmes 440 Series. To view year ranges see Features below.
To view part schematics click on the Brochures tab.
$80.99
Miller Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan
This is the front extend cylinder pin for the wheel lift extend cylinder on
Miller Industries Light Duty Wreckers. It replaced part number 12-0703345. To
view what models this pin fits on please see Features below. To view part
schematics click on the Brochures tab.
$39.99
Miller Detent Ball, 1-3/16"
This 1-3/16" steel Detent Ball from Miller Industries is used on the assembly
of Century Car Carriers and Wreckers.
$14.69
Miller Screw, Hex Head Cap, 3/8" x 7/8"
Hex Head Cap Screws are designed for easy assembly into a tapped hole. This
screw meets SAE specifications with a specially designed washer face under the
head and a chamfered point. The zinc plating slows the corrosion rate making it
last through the elements. This screw is 3/8" diameter x 7/8" long. It is used
on the Wheel Lift Assembly of Champion Carriers prior to 2001, and Vulcan 10
Series Carriers made from 2003-2005. See the features below, and the brochure
tab for a list of breakdowns.
$0.19
Related products
Miller Wheel-Lift Lift Cylinder Seal Kit Century Challenger Champio Holmes Vulcan
This seal kit is designed to withstand the temperatures and pressures of
hydraulic cylinders and can help operators get the maximum productivity out of
their machine. Resealing cylinders is one way to help lower operating costs and
improve the performance of your machines hydraulic system. This cylinder fits
the wheel-lift lift cylinder used on both car carriers and light duty wreckers.
See Features below to view specific models of each. To view part schematics
click the Brochures tab. Please remember that seal kits may fit different
cylinders of the same diameter. See the chart below for more information.
$52.99
Miller Swing L-Arm Cylinder Clevis Pin 5/8" x 1.5" Century Holmes Vulcan
This is the clevis pin for the Swing L-Arm cylinder on the Century Express 300
Series, Holmes 440SL and the Vulcan 810 Power Tilt light duty wreckers by
Miller Industries. This clevis pin measures 5/8" x 1.5". This pin is used to
connect the swing L-arm cylinder to the swing L-arm. To see which specific
models this pin fits please see Features below. To view part schematics
click on the Brochure tab.
$9.19
Miller Boom Lift Cylinder Seal Kit Century and Holmes
This is a Seal Kit for the Boom Lift Cylinder on Century and Holmes Light Duty
Wreckers by Miller Industries. This seal kit will fit the lift cylinder on
Century Formula I Duplex Tilt 411 & 412, and Holmes HP 552 / DFT 650. To view
part schematics click on the Brochures tab.
$41.99
Miller Right Wheel Cylinder Retainer
This is a replacement auto grip claw cylinder for second generation auto grip
autoloaders, 2003 and up. Right hand claw cylinder. This is the cylinder that
moves your right wheel retainer on your wheel lift.
$1,336.99
Chevron Auto Grip Claw Cylinder, Left, 2nd Generation
Replacement Auto Grip Claw Cylinder for Chevron second generation 2003 and up.
Left hand claw cylinder.
$1,336.99
Miller Snap Ring 1" External Vulcan Modular 880 / 890
This is a 1" Snap Ring by Miller Industries. This snap ring is used on the
wheel lift extend cylinder pin. This snap ring secures the pin in place. To
view the part schematic click on the Brochure tab.
$1.79
Miller Seal Kit Wheel Lift Fold Cylinder 12-0302919
This is a replacement Seal Kit for Wheel Lift Fold Cylinder 12-0302919.
$93.99
Miller Lower Parrallel Arm Pin 411 / 412
This is the weldment pin that connects the outer stinger to the parallel arms
on a Formula I 411/412 by Miller Indstries. See brochure for reference chart.
$199.99
Miller Swing L-Arm Cylinder Century Challenger Holmes Vulcan
This is the Swing L-Arm Cylinder, also known as the Claw Cylinder, for autoload
wreckers by Miller Industries. This cylinder will fit Century Express 300
Series, Midnight Express Series, Challenger 4300 Express Series, Holmes 440SL,
Vulcan Modular 807, 810 Intruder and 810 Power Tilt Wreckers. To view part
schematics click the Brochures tab.
$776.99
Miller Rear Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan 6" x 7/8"
This is the rear extend cylinder pin for many light duty wreckers by Miller
Industries. This pin will work with most Century, Challenger, Champion, Holmes
and Vulcan light duty wreckers. This pin measure 6" long with a diamter of
7/8". To view specific wrecker models this pin fits see Features below.
$27.49
Miller Swing L-Arm Cylinder Pin Century Challenger Vulcan
This is the L-Arm side, Swing L-Arm Cylinder Pin. This pin fits cylinder part
number 12-0303844. This pin fits Century, Challenger and Vulcan wrecker models.
To view specific models see Features below. To view part schematics click on
the Brochures tab.
$85.99
Miller Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan
This is the front extend cylinder pin for the wheel lift extend cylinder on
Miller Industries Light Duty Wreckers. It replaced part number 12-0703345. To
view what models this pin fits on please see Features below. To view part
schematics click on the Brochures tab.
$39.99
Miller Seal Kit Wheel-Lift Extend Cylinder
This 12-004086 Seal Kit fits 10 Series Century, Holmes, Champion Wheel-lift
In/Out Cylinders using a 0302178 Cylinder 2.5" x 60" to 12/2002. This seal kit
will also fit wheel lift extend cylinder, 12-0303020, on Century, Challenger,
Champion, and Holmes Light Duty Wrecker Models. Please remember that seal kits
may fit different cylinders of the same diameter. See the chart below for more
information.
$48.99
Miller Seal Kit Swing L-Arm Cylinder 12-0303844
This is a replacement seal kit for the swing L-arm cylinder for autoload
wreckers by Miller Industries. This seal kit if for cylinder part number:
12-0303844.
$80.99
Miller Wheel Lift Extend Cylinder Century Challenger Holmes Vulcan
This is the Wheel Lift Extend Cylinder on Light Duty Wreckers by Miller
Industries. This extend cylinder will fit on the following models. The Century
300 Express Series, The Century 300 Modular Express Series, The Challenger 4300
Express Series, The Holmes 440SL Series, The Vulcan Modular 807, The Vulcan 810
Intruder, The Vulcan 812 Intruder, and The Vulcan 810 Power Tilt. To view part
schematics click the Brochure Tab.
$737.99
Miller Boom Extend Cylinder Seal Kit Century Challenger Holmes
This is the Seal Kit for the Boom Extend Cylinder on Miller Light Duty
Wreckers. This seal kit is for cylinder part number 12-0301755. To view what
models this will fit see Features below. To view part schematics click the
Brochures tab.
$19.49
Miller Wheel-Lift Lift Cylinder Seal Kit Century Challenger Champio Holmes Vulcan
This seal kit is designed to withstand the temperatures and pressures of
hydraulic cylinders and can help operators get the maximum productivity out of
their machine. Resealing cylinders is one way to help lower operating costs and
improve the performance of your machines hydraulic system. This cylinder fits
the wheel-lift lift cylinder used on both car carriers and light duty wreckers.
See Features below to view specific models of each. To view part schematics
click the Brochures tab. Please remember that seal kits may fit different
cylinders of the same diameter. See the chart below for more information.
$52.99
Miller Swing L-Arm Cylinder Clevis Pin 5/8" x 1.5" Century Holmes Vulcan
This is the clevis pin for the Swing L-Arm cylinder on the Century Express 300
Series, Holmes 440SL and the Vulcan 810 Power Tilt light duty wreckers by
Miller Industries. This clevis pin measures 5/8" x 1.5". This pin is used to
connect the swing L-arm cylinder to the swing L-arm. To see which specific
models this pin fits please see Features below. To view part schematics
click on the Brochure tab.
$9.19
Miller Boom Lift Cylinder Seal Kit Century and Holmes
This is a Seal Kit for the Boom Lift Cylinder on Century and Holmes Light Duty
Wreckers by Miller Industries. This seal kit will fit the lift cylinder on
Century Formula I Duplex Tilt 411 & 412, and Holmes HP 552 / DFT 650. To view
part schematics click on the Brochures tab.
$41.99
Miller Right Wheel Cylinder Retainer
This is a replacement auto grip claw cylinder for second generation auto grip
autoloaders, 2003 and up. Right hand claw cylinder. This is the cylinder that
moves your right wheel retainer on your wheel lift.
$1,336.99
Chevron Auto Grip Claw Cylinder, Left, 2nd Generation
Replacement Auto Grip Claw Cylinder for Chevron second generation 2003 and up.
Left hand claw cylinder.
$1,336.99
Miller Snap Ring 1" External Vulcan Modular 880 / 890
This is a 1" Snap Ring by Miller Industries. This snap ring is used on the
wheel lift extend cylinder pin. This snap ring secures the pin in place. To
view the part schematic click on the Brochure tab.
$1.79
Miller Seal Kit Wheel Lift Fold Cylinder 12-0302919
This is a replacement Seal Kit for Wheel Lift Fold Cylinder 12-0302919.
$93.99
Miller Lower Parrallel Arm Pin 411 / 412
This is the weldment pin that connects the outer stinger to the parallel arms
on a Formula I 411/412 by Miller Indstries. See brochure for reference chart.
$199.99
Miller Swing L-Arm Cylinder Century Challenger Holmes Vulcan
This is the Swing L-Arm Cylinder, also known as the Claw Cylinder, for autoload
wreckers by Miller Industries. This cylinder will fit Century Express 300
Series, Midnight Express Series, Challenger 4300 Express Series, Holmes 440SL,
Vulcan Modular 807, 810 Intruder and 810 Power Tilt Wreckers. To view part
schematics click the Brochures tab.
$776.99
Miller Rear Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan 6" x 7/8"
This is the rear extend cylinder pin for many light duty wreckers by Miller
Industries. This pin will work with most Century, Challenger, Champion, Holmes
and Vulcan light duty wreckers. This pin measure 6" long with a diamter of
7/8". To view specific wrecker models this pin fits see Features below.
$27.49
Miller Swing L-Arm Cylinder Pin Century Challenger Vulcan
This is the L-Arm side, Swing L-Arm Cylinder Pin. This pin fits cylinder part
number 12-0303844. This pin fits Century, Challenger and Vulcan wrecker models.
To view specific models see Features below. To view part schematics click on
the Brochures tab.
$85.99
Miller Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan
This is the front extend cylinder pin for the wheel lift extend cylinder on
Miller Industries Light Duty Wreckers. It replaced part number 12-0703345. To
view what models this pin fits on please see Features below. To view part
schematics click on the Brochures tab.
$39.99
Miller Seal Kit Wheel-Lift Extend Cylinder
This 12-004086 Seal Kit fits 10 Series Century, Holmes, Champion Wheel-lift
In/Out Cylinders using a 0302178 Cylinder 2.5" x 60" to 12/2002. This seal kit
will also fit wheel lift extend cylinder, 12-0303020, on Century, Challenger,
Champion, and Holmes Light Duty Wrecker Models. Please remember that seal kits
may fit different cylinders of the same diameter. See the chart below for more
information.
$48.99
Miller Seal Kit Swing L-Arm Cylinder 12-0303844
This is a replacement seal kit for the swing L-arm cylinder for autoload
wreckers by Miller Industries. This seal kit if for cylinder part number:
12-0303844.
$80.99
Miller Wheel Lift Extend Cylinder Century Challenger Holmes Vulcan
This is the Wheel Lift Extend Cylinder on Light Duty Wreckers by Miller
Industries. This extend cylinder will fit on the following models. The Century
300 Express Series, The Century 300 Modular Express Series, The Challenger 4300
Express Series, The Holmes 440SL Series, The Vulcan Modular 807, The Vulcan 810
Intruder, The Vulcan 812 Intruder, and The Vulcan 810 Power Tilt. To view part
schematics click the Brochure Tab.
$737.99
Miller Boom Extend Cylinder Seal Kit Century Challenger Holmes
This is the Seal Kit for the Boom Extend Cylinder on Miller Light Duty
Wreckers. This seal kit is for cylinder part number 12-0301755. To view what
models this will fit see Features below. To view part schematics click the
Brochures tab.
$19.49
