Safety

Zip's Emergency Warning Triangle Kit is DOT-compliant and warns approaching traffic of a disabled commercial vehicle along the side of a road. The three triangles unfold and snap together, and the weighted base ensures they will stay put in most roadside conditions.

Control pedestrian and vehicular traffic around your work area with sturdy, lightweight plastic barricades from Cortina. Hollow legs and reinforcing ribs add rigidity to the sawhorse design, and recessed panels help prevent damage to the reflective, engineer-grade safety sheeting. Molded-in nesting lugs allow multiple units to be stacked together for transport and storage.

These Overhanging Truck Flags from Kishigo are made from lightweight cotton or mesh fabric and have a 12 gauge wire hanger. The flags are red and measure 18" x 18".

Please Note: Product Discontinued - ALL SALES FINAL!
Discontinued items are not eligible for return. View Returns Policy

LED Baton Road Flares are emergency safety flares that replace standard safety wands and incendiary flares. Use of these safety flares reduces the risk of fires, groundwater contamination, and batteries in our landfills. The kit includes 3-single flares inside a durable storage case that doubles as a charging unit with all chargers included.

Uses: Emergency safety flare that can be held in your hand or placed on the ground to identify road hazards, signal for help, mark detours, or direct traffic. Approved for use in personal vehicles and in the aviation, trucking, marine, and public safety markets.

• 15 red LEDs visible light range up to 1 mile
• 1 Half-wattt flashlight
• Waterproof & floats
• Crush proof
• Corrosion proof
• High strength magnets attach to metal surfaces
• Rechargeable battery included, does not need to be replaced
• 5 Flash patterns including S.O.S. Morse Code
• Includes 120V wall charger, 12V car charger
• Operating Temp. 14°F- 122°F (-10 °C - 50°C)
• Weight: 7 lbs
• Dimensions: 14 x 5.9 x 14.6 in
• Made in the USA

Please Note: Product Discontinued - ALL SALES FINAL!

Discontinued items are not eligible for return. View Returns Policy

Sign & Safety Equipment's Roll-Up signs are professionally screen or digitally printed, on various retro-reflective and non-reflective materials to ensure maximum visibility in all conditions and uses (road work, telecommunications, utilities, landscapers, etc). Always check with local or state agencies to ensure accurate reflectivity, color, and size specifications are met.

These signs are constructed with two orange fiberglass battens (ribs) that crisscross the back and provide stability for the sign itself. Battens can then be secured in a variety of different ways. They can be used with a variety of stands. All signs have extra-stiff cross braces that resist winds and keep signs flat. An additional extra-heavy coating on the braces reduces splintering.

• Work with all major brands of sign stands
• Best Sign Stands Options: TDZ50A or TDZ50B
• All Sign Stand Options: Click Here
• Meet MUTCD Section 61
• Roll up and store neatly with Velcro closure straps
• Sizes: 36" x 36" or 48" x 48"
• Made in the USA

These Universal LED Safety Flare Lights by Race Sport come as a single, pack of 3, or pack of six. They are available in Red or Amber. This product is made of high-quality materials to serve you for years to come. It was designed using state-of-the-art technology and with customers in mind.

Please Note: Product Discontinued - ALL SALES FINAL!

Discontinued items are not eligible for return. View Returns Policy

Intelligent radio technology automatically positions flares in correct sequence for quick and simple deployment. Any one flare controls entire network of flares. Changing a parameter such as pattern only requires the user to use one flare. That flare will send a message to the network of flares and will change their patterns as well. In addition, no need to turn off each flare. The user can do a "group off" from any flare and all the flares will turn off. 50 plus foot range (15 meters) between flares (when on the ground), 1,000 feet (330 meters) when placed on top of a cone. No limit to the number of flares in a string. Rugged and compact, the flares can withstand the harsh environment of a roadway while stowing small in vehicle or motorcycle. "Moving" light is more effective at alerting and guiding drivers than random-flashing stationary patterns. 12 bright through-hole side LED's, 4 bright surface mount top LED's 1-mile visibility with 360-degree horizontal viewing angle and 180-degree vertical projection.

• Uses an accelerometer to detect the flare's orientation. This will automatically choose which set of LEDs to flash. Flares in horizontal position (lying on ground), side LEDs will flash. Vertical position (attached to vehicle), top LEDs will flash. The tilt sensor can be disabled
• Magnetic base to allow mounting on vehicles, signs, cones, etc. Mounting flares on back of vehicle creates an effective light bar
• Lock the flash to the top LEDs when the flares are lying horizontally on the ground and you can brightly illuminate a traditional cone
• Five flash patterns to choose from. Four sequential patterns, one simultaneous pattern
• Battery status check with a push of a button. No need to change batteries unnecessarily! Ask the flare its' battery state
• Reverse the sequence direction with a push of a button. From any flare, the user can change the direction of the sequence. This can be done for deployment so that the user can drop the last flare in the sequence first, walk up stream towards traffic, and drop the first flare in the sequence last
• All rechargeable sets include Carrying/Charging case, DC car charger plug, AC wall charger plug
• The Single is intended to be a replacement for the sets. You need a charging case from the sets in order to recharge the individual Flare
• 24-30 hours of continuous flash

Please Note: Product Discontinued - ALL SALES FINAL!

Discontinued items are not eligible for return. View Returns Policy

Sign & Safety Equipment's Roll-Up signs are professionally screen or digitally printed, on various retro-reflective and non-reflective materials to ensure maximum visibility in all conditions and uses (road work, telecommunications, utilities, landscapers, etc). Always check with local or state agencies to ensure accurate reflectivity, color, and size specifications are met.

These signs are constructed with two orange fiberglass battens (ribs) that crisscross the back and provide stability for the sign itself. Battens can then be secured in a variety of different ways. They can be used with a variety of stands. All signs have extra-stiff cross braces that resist winds and keep signs flat. An additional extra-heavy coating on the braces reduces splintering.

• Work with all major brands of sign stands
• Best Sign Stands Options: TDZ50A or TDZ50B
• All Sign Stand Options: Click Here
• Meet MUTCD Section 61
• Roll up and store neatly with Velcro closure straps
• Sizes: 36" x 36"
• Made in the USA

Please Note: Product Discontinued - ALL SALES FINAL!

Discontinued items are not eligible for return. View Returns Policy

Sign & Safety Equipment's Roll-Up signs are professionally screen or digitally printed, on various retro-reflective and non-reflective materials to ensure maximum visibility in all conditions and uses (road work, telecommunications, utilities, landscapers, etc). Always check with local or state agencies to ensure accurate reflectivity, color, and size specifications are met.

These signs are constructed with two orange fiberglass battens (ribs) that crisscross the back and provide stability for the sign itself. Battens can then be secured in a variety of different ways. They can be used with a variety of stands. All signs have extra-stiff cross braces that resist winds and keep signs flat. An additional extra-heavy coating on the braces reduces splintering.

• Work with all major brands of sign stands
• Best Sign Stands Options: TDZ50A or TDZ50B
• All Sign Stand Options: Click Here
• Meet MUTCD Section 61
• Roll up and store neatly with Velcro closure straps
• Size: 48" x 48"
• Made in the USA

Please Note: Product Discontinued - ALL SALES FINAL!

Discontinued items are not eligible for return. View Returns Policy

Intelligent radio technology automatically positions flares in correct sequence for quick and simple deployment. Any one flare controls entire network of flares. Changing a parameter such as pattern only requires the user to use one flare. That flare will send a message to the network of flares and will change their patterns as well. In addition, no need to turn off each flare. The user can do a "group off" from any flare and all the flares will turn off. 50+ foot range (15 meters) between flares (when on the ground), 1,000 feet (330 meters) when placed on top of a cone. No limit to the number of flares in a string. Rugged and compact, the flares can withstand the harsh environment of a roadway while stowing small in vehicle or motorcycle. "Moving" light is more effective at alerting and guiding drivers than random-flashing stationary patterns.12 bright through-hole side LEDs, 4 bright surface mount top LEDs1-mile visibility with 360-degree horizontal viewing angle and 180-degree vertical projection.

• Uses an accelerometer to detect the flare's orientation. This will automatically choose which set of LEDs to flash. Flares in horizontal position (lying on ground), side LEDs will flash. Vertical position (attached to vehicle), top LEDs will flash. The tilt sensor can be disabled.
• Magnetic base to allow mounting on vehicles, signs, cones, etc. Mounting flares on back of vehicle creates an effective light bar.
• Lock the flash to the top LEDs when the flares are lying horizontally on the ground and you can brightly illuminate a traditional cone.
• Five flash patterns to choose from. Four sequential patterns, one simultaneous pattern.
• Battery status check with a push of a button. No need to change batteries unnecessarily! Ask the flare its' battery state.
• Reverse the sequence direction with a push of a button. From any flare, the user can change the direction of the sequence. This can be done for deployment so that the user can drop the last flare in the sequence first, walk up stream towards traffic, and drop the first flare in the sequence last.
• All Alkaline battery sets include Carrying Case 4 AA Alkaline batteries installed in each flare.
• The singles are intended to be used as replacement flares.
• The singles do NOT come with a carrying case.
• 40-60 hours of continuous flash
  
  Available in the following sizes
  
  

  Item #	Size	Color
  ICSSOR	Single	Orange
  ICSSRR-6	6 Pack	Red
  ICSSBB-10	10 Pack	Blue
  CSSOR-10	10 Pack	Orange
  ICSSRR-10	10 Pack	Red

  
  
  

48" replacement adsorbent socks for B/A Standard & Deluxe Spill Kit (11-SPILL2 & 11-SPILL)

Please Note: Product Discontinued - ALL SALES FINAL!

Discontinued items are not eligible for return. View Returns Policy

Sign & Safety Equipment's Roll-Up signs are professionally screen or digitally printed, on various retro-reflective and non-reflective materials to ensure maximum visibility in all conditions and uses (road work, telecommunications, utilities, landscapers, etc). Always check with local or state agencies to ensure accurate reflectivity, color, and size specifications are met.

These signs are constructed with two orange fiberglass battens (ribs) that crisscross the back and provide stability for the sign itself. Battens can then be secured in a variety of different ways. They can be used with a variety of stands. All signs have extra-stiff cross braces that resist winds and keep signs flat. An additional extra-heavy coating on the braces reduces splintering.

• Work with all major brands of sign stands
• Best Sign Stands Options: TDZ50A or TDZ50B
• All Sign Stand Options: Click Here
• Meet MUTCD Section 61
• Roll up and store neatly with Velcro closure straps
• Size: 48" x 48"
• Made in the USA

Please Note: Product Discontinued - ALL SALES FINAL!

Discontinued items are not eligible for return. View Returns Policy

This is a replacement detour arrow for the 36" Pink Sign, part # RUL3R.

Please Note: Product Discontinued - ALL SALES FINAL!

Discontinued items are not eligible for return. View Returns Policy

Sign & Safety Equipment's Roll-Up signs are professionally screen or digitally printed, on various retro-reflective and non-reflective materials to ensure maximum visibility in all conditions and uses (road work, telecommunications, utilities, landscapers, etc). Always check with local or state agencies to ensure accurate reflectivity, color, and size specifications are met.

These signs are constructed with two orange fiberglass battens (ribs) that crisscross the back and provide stability for the sign itself. Battens can then be secured in a variety of different ways. They can be used with a variety of stands. All signs have extra-stiff cross braces that resist winds and keep signs flat. An additional extra-heavy coating on the braces reduces splintering.

• Work with all major brands of sign stands
• Best Sign Stands Options: TDZ50A or TDZ50B
• All Sign Stand Options: Click Here
• Meet MUTCD Section 61
• Roll up and store neatly with Velcro closure straps
• Size:48" x 48"
• Made in the USA

Please Note: Product Discontinued - ALL SALES FINAL!

Discontinued items are not eligible for return. View Returns Policy

Highly visible Fluorescent Cones are constructed of durable PVC material that resists cracking. Their wide body design makes them resistant to tipping in high winds or heavy traffic situations. Increase work zone safety with strategically placed cones and help keep workers and work areas safer.

• 18" tall
• 3 lbs
• Durable PVC
• Use outdoors or indoors
• Superior stability
• Stackable
• Increases driver and pedestrian awareness
• Brilliant flourescent lime PVC flow-molded over white for maximum visibility
• One piece design means no seams to split or tear
• Superior flexibility in heat or cold - retains shape after an impact
• Cleated base grips the road and the wide body design ensures stability
• UV-Stabilizers help prevent fading
• Domestic cone - made in the U.S.A.