0 Item(s)
You have no items in your shopping cart.
Miscellaneous
Showing 22666 items
Recently viewed products
-
Mobile Control System 10 Function
-
Unity Installation Kit
-
Switch Panel 1 Switch
-
Universal Switch Panel 4 Switch
-
Bushing-Input Planetary Winch
-
Snatch Block Assembly
-
Jerr-Dan Control Hood Driver Side
-
PSE/ Code 3 Arrowstik End Cap Gasket
-
Access Tools Paddle Handle Max
-
Stellar 2 Drawer Toolbox Systems
-
Reelcraft Pivot Base Bracket
-
SafeAll Traffic Commander Dial
-
Tiger Tool 6 Point Axle Nut Socket w/ Various Sizes
-
Maxxima 7" Round LED Reverse Light
Your Filters
Clear All
Your Filters:
Filter
Sort by
Loading...
Loading...
New Style Collins SLZ Dolly Ratchet Right Side Assembly
Don't neglect worn or damaged safety ratchets on your Collins SLZ Hi-Speed
Dolly Set. Replace them today with new assemblies from Zip's AW Direct. We
supply zinc-plated replacement ratchets for the left or right side of your
Collins dollies for 2006 and newer models. With spring-assisted lever action,
the safety ratchets keep the dolly's pry bar in check in case it slips or if
you lose your footing on loose gravel or on slippery surfaces. They also allow
for greater mobility in tight spaces and give you peace of mind while towing
down the road.
$67.99
Miller Composite Bell Crank
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
$15.99
Pin and Link Assembly
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
$38.09
Miller Control Handle, Pivot Base
This Pivot Base Straight Control Handle from Miller Industries is used on the 6
and 9 Spool Control Station of Century Generation II 16 Series LCG Car
Carriers. Please see the brochure tab for a list of breakdowns.
$20.59
SAS Safety N95 Filter/Prefilter
SAS Safety 1060-00 N95 Pre-Filter (Box of 12) - At least 95% efficient against non-oil particulate aerosols. Time use restrictions may apply. Do not exceed maximum-use concentrations established by regulatory standards.
$5.49
Handle Bracket
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
$43.19
Landoll Yellow Clear Lens Marker Light
Unable to sell outside of the United States of America
$19.99
Miller Rubber Stop Century 300 Series and Vulcan 807 / 810
This Rubber Stop from Miller Industries is used on the boom assembly of Vulcan
810 Intruders, Vulcan 807R and Century 301, 301M, 311 and 312 Wreckers.
$43.99
Fastenal 1/4" - 28 Grease Fitting w/ Ball Check
This straight grease fitting is used to dispense grease into a mating part using a grease gun. It is made from steel with a zinc finish and comes with a ball check. This part has replaced part number
$0.29
Ramsey Seal Kit
This gasket and seal kit is for the H-200 series Ramsey winch with the " keyhole style " worm gear housing cover.
$79.99
Miller Clevis Pin, 3/8" x 1-1/8"
This 3/8" x 1-1/8" Clevis Pin from Miller Industries is used on the 6 and 9
spool Control Station of Century LCG Generation II 16 Series Car Carriers. See
the brochure tab for breakdowns.
$2.99
Spring, Cable Tensioner Combo
This is a replacement cable tensioner combo spring. Replaces part number:
SP8-A9018S.
$11.89
Eagle Wheel Lift Attachment Bronze Bushing
This is a bronze bushing for an Eagle Best-Lift Forklift Attachment. This bushing is used where the claws of the forklift attachment mounts to the crossbar. You will need two, one for the driver side claw and one for the passenger side claw. The dimensions of this bushing are 3" long with a 1-1/4" outside diameter and a 1" inside diameter. This part can be used to replace Part Number E300002.
$22.41
Miller Bottom Cable Guide
This Bottom Cable Guide from Miller Industries is used on the Boom Assembly of
many Century, Challenger, and Holmes Wreckers. Please see the brochures tab for
a full list of Wreckers and parts schematics.
$26.39
Lock Nut, Flexible, 5/8"-11
This Flexible Lock Nut is used in the assembly of Century and Holmes wreckers
from Miller Industries. This nut can be used in the wheel lift, boom, or
crossbar assembly. Please see the brochure tab for a list of breakdowns where
this nut is used. Start by hand, and then wrench the nut into position anywhere
along the stud or fastener; the expansion of the top slotted section locks the
nut. Made from a single piece of metal, these nuts have greater fatigue
strengths than similar size nylock nuts and can be used in higher temperature
applications. The Cadmium plating provides excellent corrosion resistance and
improves conductivity.
$2.49
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold in Packages of 100
$9.99
Miller Eagle Claw Spring Kit
Spring set for Eagle wheel lifts. This part is used to replace Part Number
AWS-1010-A.
$46.99
Miller Rubber T Mount
This Rubber T Mount from Miller Industries is used on the Subframe Assembly of
many Century, Eagle, Holmes, and Vulcan Wreckers. Please see the brochure tab
for a full list of breakdowns.
$6.79
Miller Inner Boom Bushing
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
$94.99
Miller Mudflap Bracket, Rh
This is a Miller replacement mudflap bracket, right. It is for a 12 series LCG.
$197.99
Miller Splash Guard LCG
This splash guard can be easily installed and used on 0751032 brackets.
$197.99
5/8-11X5.5 Flt Hd Sckt Cap Scw
This is a 5/8-11 X 5.5 Flt Hd Sckt Cap screw from Miller Industries.
$5.79
Miller Crossbar Pivot Pin
This is a replacement crossbar pivot pin by Miller Industries. This pivot pin
is used on the Autogrip II. This is the pin that connects the crossbar to the
wheel lift stinger and allows the crossbar to pivot.
$223.99
Miller Stop Plate 2 5/8" x 1" x 5/8"
This Stop Plate from Miller Industries is used in the assembly of wheel lifts, SDU, underlifts, and towers for many Miller car carriers and wreckers. Those include Century wreckers, Challenger wreckers, and Challenger, Champion, Holmes and Vulcan car carriers. This stop plate measures 2-5/8" long, 1" tall, and 5/8" wide. Please see the brochure tab for a list of breakdowns This part can be used to replace Part Number HD-106.
$27.49
Right Wheel Retainer
L-arm, Right hand, Chevron with notched top. Fits the 15-65265L wheel grid.
$450.99
Wheel Lift Crossbar Plate Century 300 Series Holmes 440SL and Vulcan 807
This is a centering crossbar plate for wheel lift on the Vulcan 807, Century
300, and Holmes 440SL Series by Miller Industries.
$154.99
Miller Screw, Button Head, 3/8"-24 x 5/8"
This Button Head Screw from Miller Industries is used to screw the stop plates
and slide pads onto boom weldments in many Miller Wrecker assemblies. These
assemblies include wheel lift, SDU, underlift, and tower assemblies on Century,
Challenger, and Holmes wreckers. The screw measures 3/8" diameter x 5/8" long
with a thread size of 24. Please see the brochure tab for a list of breakdowns.
$0.39
Jerr-Dan Pivot Pin Kit for the Wheel Lift
Replacement kit for pin p/n 4691000198 and is for the MPL series wreckers.
$280.99
Miller Grease Fitting (See 80013)
This is a replacement universal Miller grease fitting (See 80013).
$6.89
Miller Clevis Pin, 5/8" x 6", Zinc Plated
This Clevis Pin from Miller Industries is used on the lift adapter assembly of
Vulcan NV-50 Wrecker and a Century 7035 2-Speed Wrecker. This clevis pin is
zinc plated and it measures 5/8" x 6" long. This part replaces part 12-0711002.
$15.59
Crossbar Positioning Plate, For Century 3212,Holmes 600R and Vulcan V30 Wreckers
This crossbar positioning plate fits Century 3212, Holmes 600R and Vulcan V30
heavy duty wreckers.
$56.99
Snap Ring, Internal, 2-1/2"
This 2-1/2" Internal Snap Ring is used on the Auto Grip II assembly of Century
and Vulcan Car Carriers Please see the features below for a list of carriers
and see the brochure tab for a breakdown.
$16.79
Stud-Mount Kit for Whelen Light Bars
This stud-mount kit lets you easily mount a Whelen light bar to any flat
surface. It includes hardware and three feet that easily slide into
the channel on the bottom of light bar. Adjust the mount by sliding back and
forth through the light bar channel. It raises the light bar 1-1/4" off the
surface.
$121.99
Miller Right Approach Nylon Tail Roller Century Champion Chevron and Vulcan
This is a replacement nylon tail roller for right approach car carriers by
Miller Industries. This roller gets bolted on to the end of the bed. To view
which specific models this roller will fit see Features below. To view the
schematics click on the brochure tab.
$43.19
In The Ditch Toolbox Latch
$77.99
Miller Bowtie Pin, 1/4- 3/8
This is a replacement Bow Tie Pin from Miller Industries. This pin is used to
hold the clevis pin in place that attaches the control handle to the control
valve.
$0.19
Screw, Heavy Duty Flat Socket, 3/8"-16 x 3/4"
This Heavy Duty Flat Socket Screw has replaced part number 12-0400349. This
screw is used in the assembly of many Miller Industries products, such as:
Century Wheel Lift Boom Assemblies, Crossbar Assemblies, Subframe Assemblies,
and Stage Extension System Assemblies. It is also used on a Holmes 440 SL Wheel
Lift Assembly and a 440 SL Wheel Lift Crossbar Assembly. To see the breakdowns
go to the Brochures tab, open the one of the documents, then search for 0400349
to see the breakdowns.
$0.39
Chevron Knob, Black, Wrecker
This Black Knob from Chevron is used on several Chevron Wreckers. These include
408V, 408T, 512, and 1014 Wreckers. The knob has a threaded hole that can be
twisted onto a screw or handle. Please see the features below for a list of
wreckers and the brochure tab for breakdowns.
$10.89
Filter
1 - 60 of 22666 items
