Air Compressors

The AC12V3 portable air compressor from Phoenix USA features a 3 gallon tank and .75 HP motor and has a compact design.

This 12 volt air compressor is a great way to prevent having to return home early from riding a dirt bike in your favorite remote location simply because you have a flat tire. Our 12 volt compressor can be a very useful tool for tire inflation, operating air tools, or many other camping, off-roading, or racing purposes. Can easily be stored in your toolbox, camper, or four-wheeler trailer.

Note: Special Handling Fees Apply for Specific Items

All units include air filter, low-voltage cutoff circuit board, 4-ga. power cable, oil, mounting studs and nuts. Optional accessory kit includes pressure switch, tee fitting, street elbow, quick disconnect coupler, hex nipple and dust cap.

• Continuous-duty models feature a forced-air motor and compressor-cooling system for continued use
• Dimensions: 21"L x 7"W x 11"H


Available in the following sizes



Item #	Model	Style
XD3000-12	3000	12 Volt
XD3000-24	3000	24 Volt
XD4000-12	4000	12 Volt
XD4000-24	4000	24 Volt

Phoenix Pressure Switch for a 12 Volt Air Compressor (part #AC12V3).

Oasis Manufacturing carries a variety of 1/4 of an inch NPT air fittings, all with dimensional compatibility with other NPT threaded fittings. Our fittings can be use to fit a threaded hole in an air cylinder, actuator, air tool handle, valve, and more. Our current selection includes adjustable pressure switches, open super chucks, male and female NPT couplers and plugs, tank and safety valves, tank gauges, and a 25-foot urethane hose. This 12-volt adjustable air pressure switch also features an adjustable set screw, allowing you to fine-tune your compressor’s on and off pressure from 100-250 PSI in 30-40 PSI increments

Muncie Pressure Switch (replaces 30T36727)

Pressure Switch,Relay,12V Only,1/8"NPT.

These air tanks can be mounted out of the way, such as under the vehicle of under a tool box, with only an air hose connecting the compressor. 

Note: Special Handling Fees Apply for Specific Items

Bring pneumatic power to the jobsite with Air Delivery Kits from AW Direct. These truck-mounted kits include everything you need to get more done with air tools. Equipped with all of the essentials, they are perfect for roadside assistance, construction sites and municipal work zones.

Weighing just 35 pounds, the 12V portable air compressor generates 1.70 CFM at 90 PSI and takes only 90 seconds to fill the three-gallon tank to 120 PSI. The maximum load is 45 amps. Available in three styles, the durable Reelcraft hose reel keeps your 1/4" airline stored neatly off the floor and within easy reach.

Packaged with all of the necessary accessories, each kit ships to your door ready to get to work. A three-foot long, 3/8" feeder hose with fittings supplies air from the compressor to the reel, and rubber stops help cushion the compressor as you head down the road. A two-terminal bus bar makes for a solid electrical connection.

Find the air delivery kit that works best for your operation.

Starter Kit:

• Reelcraft 4425-OLP- Low Pressure 1/4" x 25' Single Pedestal Air/ Water Hose Reel
• 12V Portable Air Compressor

Standard Kit:

• Reelcraft 5450 OLP- Low Pressure 1/4" x 50' Single Pedestal Air/ Water Hose Reel
• 12V Portable Air Compressor

Premium Kit:

• Reelcraft DP5450-OLP- Low Pressure 1/4" x 50' Dual Pedestal Air/ Water Hose Reel
• 12V Portable Air Compressor

This Premium Kit offers a ReelCraft hose reel with a dual pedestal design which is great for installing on a vehicle or truck. This rugged pedestal's two mounting arms can withstand the shaking, moving and vibrations that occur when driving down the highway or off-road applications.

Choose your preferred kit and mounting option from the drop down menu above right.

• 12V Portable Air Compressor
• 1.70 CFM at 90 PSI
• Three-gallon tank
• Reelcraft Hose Reel with 1/4" hose:
  • Starter- 25 foot air line
  • Standard- 50 foot air line with single pedestal mount
  • Premium- 50 foot air line with dual pedestal mount
• 3/8" feeder hose with fittings
• Rubber stops for air compressor
• Two-terminal bus bar

This is a 12 volt permanent mount air compressor by Voltair. It is a heavy duty cast iron twin cylinder, oil lubed compressor that runs at 470 RPM. It also has a 1 HP motor that has a 90 amp draw at 100 PSI. This compress will fill a 10 gallon tank from 0 - 150 PSI in 2 minutes and 55 seconds. It will recover a 10 gallon tank from 130 - 150 PSI in 35 seconds. The motor has a 2000 hour life. The dimensions of this product are 19" H x 18.25" W x 8.25" D. This air compressor weighs 110 lbs.

Vanair rotary screw oil is a unique, fully synthetic fluid designed to allow for easier cold weather operation and warm-up, while providing exceptional lubrication during hot weather or severe service. Vanguard is designed with special components to control fluid oxidation, limit fluid loss from vaporization, minimize wear, prevent rust and corrosion, effectively seal rotors, and keep the compressor clean.

This air compressor, Viair 350C, operates using low amp draw so they reversatile for many mobile pneumatic applications. Features include a standard 1/4" NPT stainless steel braided leader hose with inline check valve and insulated wiring for simple installation. Note: Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque is 12 to 15 ft. lbs.

Phoenix Replacement Pressure Relief Valve for a Portable 12 Volt Air Compressor with 3 Gallon Tank (AC12V3).

Voltair replacement Hub Fan.

These air tanks can be mounted out of the way, such as under the vehicle of under a tool box, with only an air hose connecting the compressor.

This on-board air system components package includes all the components you'll need to set up an on-board system in an accessible location, such as a truck bed or rear deck. Features include everything you'll need to connect a coil base directly to the compressor to get you up and running: an Oasis tire gage, adjustable power switch, urethane coil hose, several couplers, and all fittings, wire, and terminals.

The Lightest, Most Compact Rotary Screw Air Compressor and ALL-IN-ONE Hydraulically Driven Power System on the Market. Providing 300 amps of welding power, 40 cfm of on-demand air, 110/240 Volt Electrical, and 12/24 Volt Charge and Jump Starting. The Vanair Air N Arc 300 is compact enough to fit a truck's side-pack or be mounted behind the cab. The totally self-contained unit delivers more efficient use of truck space and can be integrated with the chassis for maximum versatility. Featuring the market's only remote panel for a diesel ALL-IN-ONE Power System, it provides ultimate user convenience and safety. Designed for maximum fuel efficiency, the system offers the power you need for all your mobile workshop needs. Available in Gas, Diesel and Hydraulically Drive

The Viair 400P Portable Compressor features a brand new I-Beam Sand Tray for improved stability and lighter weight. The 400P is a larger powerful portable tire inflator kit that can inflate up to a 35-inch tire from 0 to 30 PSI in less than 6 minutes. Used and approved of by off road enthusiasts worldwide, the 400P can save you when you re miles from home

Oasis Air Compressors have been developed, tested and proven to be the fastest...most powerful 12v/24v DC air compressors available today. They are built to meet the most rugged requirements for service trucks and contractors. The high performance of these compressors is attributed to the use of 5 HP "TM" winch type motors directly coupled to 10 c.i. twin cylinder York compressors.

Height: 3.23 inches; Length: 3.78 inches; Width: 3.43 inches

Goodall by Vanair swtich assembly, 12 volt boosting switch for 890-635 Regulator, all 600 Series Start-All units, 708, and 802 Start-Alls.

Goodall by Vanair air compressor fan for 600 or 900 Series.

Goodall Start-All replacement regulator with reverse current and reverse polarity protection.

12 Volt replacement motor for Voltair Air Compressor- #VA12

Flexzilla Air Compressors are the quietest on the market, emitting operating noise no louder than a normal conversation. The Air compressors are electric offering low RMP twin-cylinder pumps and motors that reduce high-frequency noise levels. Max 125 PSI and CFM @90 PSI.

Get a compressor that's built tough and keeps its cool. Fleetrite A/C compressors from International and IC Bus feature larger main shaft bearings, stainless reed valves and stronger thrust bearings.All compressors are: designed to replace common industry models, tested to original manufacturer specs, cover a wide range of International and all-makes applications, and are International and IC Bus aftermarket quality approved.

Auto Crane 30-gallon under-chassis mount receiver tank, connecting hoses and hardware. Mounts at the rear of the chassis between the frame rails. (For use with Titan 50, 60, and 70 bodies)

Phoenix Replacement Water Drainage Valve for a Portable 12 Volt Air Compressor with 3 Gallon Tank (AC12V3).

Phoenix Pressure Gauge for a 12 Volt Air Compressor (part #AC12V3).

Phoenix 2 foot long replacement compressor to reel hose for Phoenix USA air compressors.

Replacement Check Valve for a Portable 12 Volt Air Compressor with 3 Gallon Tank (AC12V3).

Replacement 12 volt solenoid for the 12 volt air compressor.

Goodall by Vanair 0-18VDC or 0-36VDC Voltmeter.

It features horizontal cooling fins and a trapezoidal head design, a standard 3/8" stainless steel braided leader hose with 3/8" NPT inline check valve and insulated wiring.

Viair's Ultra Duty Onboard Air System is a pre-packaged compressed air solution that provides an industry-leading, 200 PSI rated, 100% duty cycle 480C compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires of virtually any size.

This system is ideal for powering air tools and suspension systems, and filling tires. The easy-to-install wiring harness and manifold make wiring and plumbing the system straightforward. System includes: (1) 60A fuse & fuse holder (1) 80A relay (2) 1/4"BSP adapters for air lockers (1) T-fitting 1/4" NPT Female x 1/4" NPT Female x 1/4" NPT Male (1) 1/8" to 1/4" NPT reducer (1) Wiring harness with Delphi connections (2) Delphi connector plug kits (1) Billet 1/4" NPT x 6-port manifold and mounting bracket (1) Air filter housing with installed element (2) Replacement air filter elements (1) Dash panel air pressure gauge (1) Air pressure regulator (0-200 psi) (1) 15' DOT air line.

Replacement belt for Voltair Air Compressor.

Goodall by Vanair control panel mounted air pressure guage for units that have an air compressor. 0-200 PSI Indicator.

Goodall by Vanair 3/4" hose assembly.

Please Note: Product Discontinued - ALL SALES FINAL!
Discontinued items are not eligible for return. View Returns Policy
The Vanair® PRO 35 Series air compressor is a heavy-duty, professional-grade solution built for demanding jobsite and industrial applications. This model is new and in current production, delivering dependable performance through a rugged reciprocating compressor system and a trusted Honda® GX390 gasoline engine. Designed for durability and ease of service, the PRO 35 Series combines high air output with robust construction to support a wide range of pneumatic tools and equipment.
At the core of the PRO 35 Series is a two-cylinder, single-stage, splash-lubricated reciprocating compressor designed for consistent performance and long service life. The system includes automatic throttle control with an unloader valve, steel-braided discharge lines, and M-JIC connections on skid units. Tank-mounted models feature a 3/4" NPT ball valve for dependable air delivery. Power is supplied by a durable Honda® GX390 engine paired with a 1.6-gallon fuel tank, providing reliable operation in mobile and stationary applications. Air storage on tank models includes a complete safety and control package with a pressure gauge, pressure relief valve, ball valve, and condensation drain.

Key Highlights

Air Output: 35 CFM with operating pressures up to 175 PSIG

Engine: Honda® GX390, 11 HP single-cylinder gasoline engine (electric or pull start)

Air Storage: 30-gallon ASME/CRN-certified air tank (tank-mounted models)

Drive System: Classic V-belt drive system

Construction: 3/16" plate steel main frame with fully powder-coated belt guard

Weight: Dry weight ranges from 284–420 lbs, depending on configuration

30-gallon tank model: 45.9" L × 18.9" W × 43.4" H

Skid model: 44.4" L × 19.1" W × 22.3" H

Please Note: Product Discontinued - ALL SALES FINAL!
Discontinued items are not eligible for return. View Returns Policy

Unable to export outside of the United States

Goodall by Vanair compressor cycling switch for the 23 CFM air compressor.

Goodall by Vanair 23 CFM Compressor Assembly for 900 & 5000 Series.

Goodall by Vanair Field Coil.

Goodall by Vanair 12V/24V boosting switch for 860-635S regulator, all 600 Series units and 807.

Portable compressors with automatic shutoff come into play when moving from tire to tire, and when checking tire pressure in the middle of a tire fill. A typical portable compressor must be turned off between tire fills, and anytime you want to check tire pressure. If you aren't near the compressor, this can turn into running laps back and forth to the portable compressor to turn the unit on and off. Automatic portables do not work in this fashion and will save you time & effort to get tires inflated quickly.

Goodall by Vanair Kissling relay.

Goodall by Vanair 30 gallon vertical mount air tank for use with 11-900 & 11-600 Series Start-Alls and Goodall Power Center units.

Goodall by Vanair Spring Set for 79-371, 373, 375, and 406.

Goodall by Vanair Thru-Bolt pkg., Generator for 79-371, 373, 375, 406.