Ramps

Bridge the angle of the road to the incline of your car carrier bed or the drop-down rear door of your enclosed trailer with trailer ramps from Zip’s AW Direct. Ramps and steps from Race Ramps are sure to find a useful place in your everyday recovery or hauling activities. Browse our selection today.

Showing 33 items item

Sort by

ITI Starter Ramp

ITI Starter Ramp is made for Steel Beds or Aluminum Beds and bridges the gap between the tail of a flatbed car carrier or trailer ramp and the ground surface, creating an easy transition between uneven surfaces. This starter ramp is designed with a 90 degree notch for the tail to sit in place. The low load angle the ramp provides prevents unnecessary damage to high-end vehicles or equipment with low clearance issues.

$45.99 – $81.99

Race Ramps Flatbed Tow Ramps

Note: Special Handling Fees Apply for Specific Items

Tow like a pro with the 74-inch long Single Piece HD Tow Ramp! You know that your customer loves his or her Corvette, Porsche, or other low-to-the-ground car, and you need to show them that it's safe in your hands too. The 1 inch by 5 inch notch in this Tow Ramp enables you to simply fold the rollback down into the notches and drive on up (or hook up the winch) with no worries about your safety or the safety of the car. This ramp gives 7 inches of lift and has a 5.2-degree angle of approach. It is designed for tires up to 8 inches wide. It can support up to 2,500 pounds for a total vehicle weight capacity of 10,000 pounds.

These ramps are constructed using an exclusive, patent process. They are 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong yet durable. The ramp will not slide, scratch, or otherwise damage any floor type. The reinforced bottom allows the ramp to be used on gravel or other rough surfaces that you may encounter along the side of the road.

Please ensure that your ramp is damage-free before use. Never use two ramps on the same side of the vehicle. Use on a flat, level surface and ensure that the ramp makes full contact with the ground. Check that your steering wheel is straight and drive up at a slow, steady pace.

Tow Truck Flatbed Extension Ramps
Sold as a pair
Available in a single piece or in 2 pieces
Dimensions: 74"L x 10"W x 7"H
Lightweight - only 13.5 lbs
Each ramp supports 2,500 lbs. Total vehicle capacity per pair: 10,000 lbs
Highly durable, virtually indestructible, and very stable
Easy to use, store and transport
Unscootable! Won't slip or slide, no matter the surface
Safer than using boards
Provide a professional appearance when transporting exotic cars
Load Corvettes, Porsches and other low profile cars without doing damage

$478.99 – $523.99

Race Ramps 42.3" Compact Tow Ramps

Tow like a pro with the 42.3" long Compact Single Piece HD Tow Ramp! You know that your customer loves his or her Corvette, Porsche, or other low-to-the-ground car, and you need to show them that it's safe in your hands too. The 1 inch by 5 inch notch in this Tow Ramp enables you to simply fold the rollback down into the notches and drive on up (or hook up the winch) with no worries about your safety or the safety of the car. This compact ramp gives 4.5 inches of lift and has a 5.2-degree angle of approach. It is designed for tires up to 8 inches wide, and it can support up to 2,500 pounds for a total vehicle weight capacity of 10,000 pounds.

$293.99

Race Ramps Trailer Ramps

Note: Special Handling Fees Apply for Specific Items

These Trailer Ramps are helpful for low ground clearance cars with extra wide tires when loading and unloading vehicles from trailers. They prevent damaging the front of the vehicle by decreasing your angle of approach by 5.5 degrees. These ramps vary in size making it easy to find the right one that will work perfectly with your trailer. These ramps are lightweight, very stable, and are virtually indestructible.

These trailer ramps are manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable. They won t slide on any surface, including ice, making them a versatile choice in any weather condition.

Please ensure that your ramp is damage-free before use. Never use two ramps on the same side of the vehicle. Use on a flat, level surface and ensure that the ramp makes full contact with the ground. Check that your steering wheel is straight and drive up at a slow, steady pace.

The ramps will not slide, scratch, or otherwise damage any floor type and can hold up to 1,500 lbs. per ramp for a total vehicle weight capacity of 6,000 lbs. Each ramp is designed for 1500lbs per tire at one point on the ramp. You do not want to exceed 6,000lbs gross weight when using these.

Race Ramp Trailer Ramps
Set of 2
Lengths: 45" - 131"
Widths: 14" - 16"
Heights: 4" - 11"
100% Solid core
Supports a vehicle u to 1,500 lbs. per ramp for a total vehicle weight capacity of 6,000 lbs
RR-TR-11-2 is 2 pieces

$367.99 – $982.99

New

Guni Automotive Ramps

GUNI Heavy-Duty Automotive Ramp – Built for Low-Clearance Vehicles
Designed for car enthusiasts, towing professionals, and auto transporters, the GUNI Automotive Ramp solves a common challenge: safely loading and unloading low-clearance vehicles without risking undercarriage damage. Whether you're working with an auto trailer, rollback, or flatbed car carrier, these ramps provide the extra lift needed to reduce the approach angle and prevent bottoming out.

What sets it apart? Durability.
Unlike traditional foam or lightweight plastic ramps, the GUNI Automotive Ramp is constructed from welded high-density poly material and built to perform in demanding environments. Each ramp supports up to 3,000 lbs individually—making them ideal for today’s heavier vehicles, including EVs with a combined vehicle weight well over 10,000 lbs.

Key Features:

Heavy-duty welded HD poly construction – Won’t warp, crack, or absorb water
3,000 lb weight capacity per ramp – Handles heavier EVs and SUVs with ease
Ideal for low-clearance vehicles – Reduces risk of bottoming out on approach
Made for trailers and flatbeds – Compatible with a wide range of hauling setups
Built for commercial use – Stands up to daily abuse in towing, recovery, and transport operations
All-weather durability – Won’t degrade in sun, rain, or snow like lighter-built alternatives
Dimensions: 42" L x 10" W x 5" H
Load Angle: 5.2°
5 Year Warranty

There's simply nothing else like it on the market. Most comparable ramps are designed for personal use or garage storage—not the real-world demands of outdoor, professional grade vehicle transport.

Whether you're loading a sports car, a show car, or a Tesla Plaid, the GUNI Automotive Ramp gets the job done—safely, reliably, and without compromise.

$499.99

Race Ramps Trailer Ramps w/ Flap Cutout

Use a set of our 7-inch or 9-inch high trailer ramps to avoid scraping or removing the front bumper of your race car, sports car, lowered car or other low profile vehicle as you load it into your trailer for your next track day, car show, or multi-state trip. Our trailer ramps come with a built-in notch cut-out and are tailored to fit specific trailer measurements, so be sure to use our trailer ramp calculator before you start to browse! To use them with your trailer, simply lower your trailer door down into the 5-inch long by 1.5-inch high notch and drive your car up and into your trailer - it s that easy!

$543.99 – $773.99

Race Ramps Trak-Jaks

Trak-Jax ramps were inspired by an auto-crosser who didn't want to buy a new high-priced, low-profile jack just to change his tires at the track. These ramps lift your car 3 inches so that you can fit a standard floor jack underneath. They're small and lightweight at only 5 pounds per ramp, so you can easily toss them in the trunk of your sports car for your day at the track. They can accommodate tires up to 10 inches wide, and support up to 1,500 pounds per ramp.

$141.99

Race Ramps XTenders Car Service Ramps

These 14" Xtender Ramp extensions are designed to work with our 67-inch Race Ramps, and they reduce the angle of approach to 6.6 degrees for low profile cars. These 12" Xtender Ramp extensions are designed to work with our 56-inch Race Ramps, and they reduce the angle of approach to 6.6 degrees for low profile cars.They are a handy resource for garages and auto shops that work with multiple makes and models, or for the home enthusiast who might just need a slightly gentler incline to accommodate a new car, or a modded car with a lip or splitter. The 14" can accommodate tires up to 12 inches and only weigh 10 pounds apiece. The 12" can accommodate tires up to 10 inches, and only weigh 10 pounds apiece. Once your car is parked at the top of your ramps, the extensions can be removed for additional work space - just remember to put them back before you drive down!

$179.99 – $184.99

Race Ramps 7" Flatbed Tow Ramp Extenders

This set of two XTenders can only be used with 7-inch lift HD Tow Ramps to further lower the angle of approach. Simply place the XTenders on top of the Tow Ramps and drive on up! The XTenders can also be inverted for use as a "œhumper" ramp to get a bit of additional lift when needed. They are 10 inches wide and 35 inches long, weighing 6 pounds each.

$213.99

Race Ramps Rack Ramps

Avoid the struggle of dragging heavy steel ramps into position to help your front end clear your lift or platform! Instead, reach for a lightweight set of our 27.5-inch long hook-nose Rack Ramps or our 40-inch long hook-nose Rack Ramps. They have an 8.6-degree approach angle and come with a 3-inch cutout/lip bridge. The 14-inch width works with tires up to 12 inches wide. Each rack ramp can support up to 1,500 pounds for a total vehicle weight capacity of 6,000 pounds. The 4" H provide 4 inches of lift height. The 5" H provide 6 inches of lift height, which flattens out to 5 inches high along the lip bridge.

$224.99 – $362.99

Race Ramps Hook-Nosed Rack Ramps

Avoid the struggle of dragging heavy steel ramps into position to help your front end clear your lift or platform! Instead, reach for a lightweight set of our 36-inch or 48-inch long hook-nose Rack Ramps. The 36" have a 8-degree approach angle and the 48" has a a 6.4-degree approach angle and come with a 3-inch hook. The 14-inch width works with tires up to 12 inches wide. Each rack ramp can support up to 1,500 pounds for a total vehicle weight capacity of 6,000 pounds. They provide 5 inches of lift height.

$437.99 – $590.99

Race Ramps Scale Ramps

The next time you reach for your racing scales, hold back on the jack and instead reach for this set of four or set of two Scale Ramps. They will save you time setting up, and provide 2.5 inches of height to get your car ready for positioning on your racing scales. Each scale ramp can support up to 1,500 pounds for a total vehicle weight capacity of 6,000 pounds. The 8.7-degree approach angle allows low-profile cars to easily mount onto your scales. They are ideal for track days, auto shops or personal garages as they can be moved and transported with ease.

$141.99 – $203.99

Race Ramps Racer Mat

Our Racer Mat is a plush, durable, folding mat designed to keep you comfortable and clean while working on your vehicle. Made out of polypropylene fiber, the Racer Mat is oil and chemical resistant and does not retain water - meaning it won't grow mold or mildew and is easy to clean. Measuring 6 feet long by 2 feet wide with 1 inch of padding, it is big enough to lie on. For transport and storage, it can be folded in half, and has cut-out handles for better handling. Protect your back, knees, and maybe even your clothes any time you're on the ground!

$68.99

Race Ramps One-Piece Multi-Purpose Wheel Cribs

Safer than jack stands and far more attractive, our multi-purpose Wheel Cribs are a stable, sleek alternative that offer greater maneuverability and versatility. Whether being used for fluid changes, general maintenance, detailing, or lifting up your vehicle at a show, these wheel cribs will truly be the talk of the town. Sold in pairs, each crib can hold up to 1,500 pounds for a total vehicle weight capacity of 6,000 pounds, and they support tire diameters 24 to 30 inches. They are also incredibly lightweight at 5-7 pounds per crib - perfect for taking with you to shows or moving around your shop. For a particularly sharp show display, use them in conjunction a show mirror.

$197.99 – $232.99

Race Ramps Multi-Purpose Shop Ramps

It's time to scrap the boards and makeshift ramp set-ups! A pair of Multi-Purpose Shop Ramps are a worthwhile investment for any garage. They became part of our Race Ramps family after multiple requests for similar ramps, and we engineered them to suit several common auto shop scenarios. You can use these ramps as a trailer ramp, alignment ramp extender, a 4-post lift ramp extender, a 2-post lift ramp, a jack-assist ramp, or anything else you can think of.

$386.99

Race Ramps 56" Car Service Ramps

Designed to work with low profile and lowered cars, 56-inch Race Ramps provide 8 inches of lift for better access to the underbody of your vehicle. These tough ramps are sold in pairs and can support up to 1,500 pounds each for a total vehicle weight capacity of 6,000 pounds. The two-piece design gives you the option to remove the ramp once your car is stabilized on the top portion for better side access during service or display in showrooms or at shows. Each ramp also comes with a carrying strap for easy transport and storage.

$316.99 – $355.99

Race Ramps 12" Racer Chock

Put safety first with this 12-inch Racer Chock. It has texture across the entire width for the ultimate grip on your tire, ensuring that both the chock and the tire will not move. At only 2 pounds, it is light enough to easily move and reposition, and it can hold up to 1,500 pounds.

$58.99

Race Ramps 30" Rally Ramps

Easily maintain, service or display your sports car with our set of two 30-inch Rally Ramps. We engineered these ramps to work with most small sports cars including stock Miatas, Subarus, Evos, BMWs and Triumph MGs. This set of two ramps fits tires up to 8 inches wide, and provides a full 5 inches of lift. They have a 16-degree angle of approach and can hold up to 1,500 pounds each for a total vehicle weight capacity of 6,000 pounds, yet each ramp only weighs 4 pounds. The raised lip alerts the driver that they've reached the top of the ramps, and they come carrying straps for easy positioning.

$146.99

Race Ramps Trailer Side Kick Ramp

The Trailer Side Kick is helpful both for parking your vehicle inside your trailer and for changing a trailer tire. For parking inside a trailer, the Side Kick fits in front of a trailer's wheel wells to provide a tapered, protective guide between your vehicle's wheels and the trailer's steel wheel wells. For changing a trailer tire, simply drive the good tire onto the ramp and the flat tire will be lifted off of the ground for easy removal and replacement. The Side Kick can be used on any level surface without sinking, even grass, or even sand.

$184.99

Race Ramps Adjustable Multi-Purpose Wheel Cribs

$204.99 – $264.99

Race Ramps Show Ramps

Show Ramps are a quick, easy way to improve your vehicle display at a show. These double incline ramps can be used to raise up the front, back, or side of the car; or get two sets and raise up the entire body! They are a great lightweight alternative to jack stands, floor jacks, and wooden blocks. Paired with an accessory like a show mirror, they make for an impressive display that is easy to set up and transport.

$190.99

Race Ramps Roll-Ups Ramps

Designed to be used with our 56- or 67-inch XT Race Ramps, this pair of Roll-Ups Ramps provide that extra bit of boost to give low profile cars extra clearance for maintenance. Roll-Ups are perfect for raising up the front or rear of your car up 4 inches, which is enough to slide in most standard floor jacks. At 14 inches, they can be used with tires up to 12 inches wide, and each ramp can support by to 1,500 pounds for a total vehicle weight capacity of 6,000 pounds. These ramps only weigh 4 pounds apiece, making them light and small enough to fit in the trunk of your C5 or C6 Corvette, or bring along to track day.

$204.99

Race Ramps 40" Sport Ramps

Easily maintain, service or display your sports car with our 40-inch Sport Ramps. We engineered these ramps to work with lowered and short-nose vehicles such as stock Miatas, Subarus, Evos, BMWs, Triumphs MGs, Jaguars, C1-C3 Corvettes and more. This set of two ramps fits tires up to 8 inches wide, and provides a full 7 inches of lift. They have a 16.7-degree angle of approach and can hold up to 1,500 pounds each for a total vehicle weight capacity of 6,000 pounds, yet each ramp only weighs 6 pounds. The raised lip alerts the driver that they ve reached the top of the ramps

$198.99

Race Ramps Lightweight Trailer Steps

Perfect for use with trailers, as well as around a garage or workshop, this sturdy lightweight Trailer Steps will give you just the lift you need. In addition to being a helpful step up outside or inside trailers, it can also be used for an extra boost while washing and detailing, or as a handy bench while you service your car on our Race Ramps or wheel cribs.

$184.99 – $197.99

Race Ramps 10" W FlatStopper Car Storage Ramp Set

You're pulling your collector's car out of storage for the first time this year and see flat spots on your tires once again. You sigh, knowing that you can expect a bumpy ride for a while or that you'll have to replace them if those spots won't go away. Don't let that happen again! FlatStoppers have been saving thousands of tires worldwide while they're stuck in winter or long-term storage and they are more affordable than the cost of replacing your tires. When you're parking your car for 30 days or more, simply drive onto our best-selling 28-inch long FlatStoppers and your tires will settle into the concave depression of the pads to evenly disperse the weight of the car across the increased contact patch and prevent flat spots.

$223.99

Race Ramps Trailer Mate Ramps

Trailer Mates eliminate the hassle and stress of getting your low profile, track car or sportscar safely tied down in your trailer without scraping the front bumper. Trailer Mates add 3 inches of ground clearance so that you have more room to reach your vehicle's tie-down points, and in some cases, open the door over the trailer wheel well.

$238.99 – $264.99

Race Ramps Show Cribs

Make your car stand tall at your next event with Race Ramps Show Cribs. Once the car has been safely jacked up and lowered into the show cribs, they will safely cradle the tires for an elevated view of your vehicle. The pyramid design is tapered on all four side for increased stability and stylish design, which also provides an unobstructed view underneath the car and adds a dramatic flair to your vehicle display.

$256.99

B/A Jump Ramp, 18" x 84"

Aluminum Jump Ramp allow the vehicle to get from the trailer to the tractor. These ramps have a reverse knife point end.

$334.99

Race Ramps 67" XT Ramps

Designed to work with low profile and lowered cars, 67-inch XT Race Ramps provide 10 inches of lift for better access to the underbody of your vehicle for service and maintenance. These tough ramps are sold in pairs and can support up to 1,500 pounds each for a total vehicle weight capacity of 6,000 pounds. Their 14-inch width is designed to comfortably accommodate tires up to 12 inches wide. The raised lip at the top of the ramp provides a gentle stop that reduces the need for a spotter, although we always recommend having one present. Positioning them or moving them for storage is easy, since each ramp only weighs 17 pounds and comes with a carrying strap.

$424.99 – $492.99

Race Ramps 23.75" L Slip Plate Stands

Keep your vehicle elevated for service and maintenance with the lightweight and tough Race Ramps Slip Plate Stands. Lightweight construction makes them easy to transport and maneuver into position for use with most industry slip plates, grease plates, and turntables.

$525.99

Race Ramps 80" Mulit-Purpose Combo Car Service Ramps

Our set of two-piece 80-inch Combo Ramps are the "triple header" of ramps! Use them as service ramps in the garage, trailer ramps when loading, or remove the ramp portion and use them as wheel cribs for display or service. They have an 8.5-degree angle of approach and can hold up to 1,500 pounds each for a total vehicle weight capacity of 6,000 pounds yet each ramp only weighs 22 pounds.

$643.99

B/A Products Open End Ramp

Note: Special Handling Fees Apply for Specific Items

Aluminum Open-End style ramps offer a reliable hook designed to fit up to a 1-1/4" round bar or angle steel. There must be a rail for these ramps to connect to. These ramps have a stub toe end.

Lbs. per Axle: 4,000 lbs. - 5,000 lbs.

Sold as Each

Available in the following sizes

Item #	Size
BA-R-M15094-O5	15" x 94"
BA-R-M15094-O5T	15" x 94" Thin
BA-R-M18096-05	18" x 96"

$349.99 – $909.99

Race Ramps 4" H Car Lift Ramps

There s nothing as frustrating as trying to work on a car only to realize that it won't fit on your shop or home lift! Luckily, these 4-inch Car Lift Ramps make it easier than ever to get that low vehicle up on a scissor or 2-post lift. They come as a pair; each ramp weighs about 40 pounds total and is compromised of four interlocking pieces. Each side can hold up to 3,000 pounds for a total vehicle weight capacity of 6,000 pounds.

$1,244.99

1 - 33 of 33 items

Ramps: Reliable Loading Solutions for Trailers and Rollbacks

When it comes to safely loading and unloading vehicles, having the right trailer ramps makes all the difference. These specialized tools create a smooth, stable transition from the ground to your rollback bed or trailer deck, reducing the risk of damage and making the process more efficient. From car hauler trailer ramps to heavy duty trailer ramps built for trucks and equipment, Zip’s offers professional-grade solutions for every towing application.

Why Choose Trailer Ramps for Towing?

Whether you’re working with sports cars, SUVs, or commercial vehicles, the angle of approach matters. Without the right ramps for trailers, vehicles with low ground clearance may scrape against the bed, leading to costly repairs. Car trailer ramps and trailer ramp extensions help bridge the gap, making loading safer and smoother.

Tow operators often rely on starter ramps or trailer starter ramps for an extra boost when rolling vehicles onto flatbeds. These additions lower the approach angle even further, which is especially helpful for race cars, luxury vehicles, or specialty transports. By investing in the right auto trailer ramps, you not only improve safety but also protect customer vehicles and your equipment.

Best-Selling Trailer Ramps at Zip’s

Zip’s carries a wide selection of ramps for rollbacks and trailers from trusted brands like Race Ramps and ITI Skates. Some of our most popular options include:

Race Ramps 42.3" Compact Tow Ramps – Compact and lightweight, these ramps are perfect for professional towers looking for portable versatility.
Race Ramps Flatbed Tow Ramps – Designed to provide a gentle incline for vehicles with low clearance, ideal for luxury cars and sports models.
ITI Starter Ramp – A proven solution for rollback operators, this ITI Starter Ramp reduces approach angle and makes loading smooth and efficient.
Race Ramps Trailer Ramps – A durable set of trailer race ramps built to handle a wide range of vehicle types, from daily drivers to performance vehicles.

With proven durability and innovative designs, Race Ramps and ITI remain industry leaders in loading technology.

Choosing the Right Trailer Ramp

When selecting the right car hauler trailer ramps or ramps for rollbacks, consider the following factors:

Vehicle Type – Sports cars, trucks, and specialty vehicles each have different clearance requirements.
Ramp Angle – Lower angles are essential for low-clearance vehicles; starter ramps can help reduce the incline further.
Material & Weight – Lightweight composite ramps are easier to transport, while heavy duty trailer ramps handle larger loads.
Ramp Length & Width – Longer ramps create smoother approaches, while wider ramps provide more stability.

By matching the right trailer ramps for sale to your towing needs, you ensure efficiency, safety, and long-term reliability.

FAQ: Trailer Ramps and Loading Solutions

What are trailer ramps used for?
Trailer ramps create a safe and gradual incline for loading vehicles onto trailers and rollbacks without causing damage.

Do I need starter ramps for my rollback?
Yes, trailer starter ramps are highly recommended for vehicles with low clearance since they help reduce the angle of approach.

Are Race Ramps good for low-clearance cars?
Yes, Race Ramps are specifically designed with low angles to protect race cars, luxury vehicles, and sports cars during loading.

What’s the difference between ITI Starter Ramps and Race Ramps?
ITI Starter Ramps are compact add-ons for rollback operators, while Race Ramps provide full-length ramp solutions for both trailers and flatbeds.

Are heavy duty trailer ramps necessary for trucks?
Yes, if you are hauling larger vehicles or equipment, heavy duty trailer ramps are essential for safety and durability.