ITI

ITI Control Arm Skate is designed for use on a disabled or wrecked vehicle with a missing wheel or lugnuts, a broken ball joint, control arm, axle or other suspension components. The top of this patented skate has a pocket for the ball-joint and cradles the a-frame of the suspension. The rounded ends of this skate allow for easy loading as it will navigate the approach lip of a bed or trailer.

ITI Yellow Automotive Skates are ideal to use when moving, loading and unloading a locked, disabled or wrecked car or truck. These ITI Skates willdrastically reduce the moving resistance, eliminate tire damage and make your operator more efficient and safer. Simply wedge a skate under the tires of the vehicle and begin winching. In times when you are having difficulty wedging the skates beneath the tires or wheels, the large face and durable design of the ITI skate withstands being driven into place with a mallet. These lightweight skates perform well on most surfaces including gravel, asphalt and cement. Also, utilizing skates when loading vehicles will protect the deck of your bed or trailer from damage. A better customer service will be provided because the skates will minimize the scrapes and mars on the driveway or parking lot too!

ITI Automotive Skates are ideal to use when moving, loading and unloading a locked, disabled or wrecked car or truck. These ITI Skates will drastically reduce the moving resistance, eliminate tire damage and make your operator more efficient and safer. Simply wedge a skate under the tires of the vehicle and begin winching. In times when you are having difficulty wedging the skates beneath the tires or wheels, the large face and durable design of the ITI skate withstands being driven into place with a mallet. These lightweight skates perform well on most surfaces including gravel, asphalt and cement. Also, utilizing skates when loading vehicles will protect the deck of your bed or trailer from damage. A better customer service will be provided because the skates will minimize the scrapes and mars on the driveway or parking lot too!

ITI Starter Ramp is made for Steel Beds or Aluminum Beds and bridges the gap between the tail of a flatbed car carrier or trailer ramp and the ground surface, creating an easy transition between uneven surfaces. This starter ramp is designed with a 90 degree notch for the tail to sit in place. The low load angle the ramp provides prevents unnecessary damage to high-end vehicles or equipment with low clearance issues.

Utilizing the Low Pro Pocket Plug Container Skate from ITI makes loading or moving shipping containers slick and easy! This patented skate has a low-profile design achieving an overall lower height of the container when loaded on a trailer or a flatbed on a truck. Place the sea container skate beneath the corner of the container - fitting the raised plug nicely into the oblong pocket of the container. The skate's rounded ends eases the transition from the ground surface to the angle of a rollback carrier or trailer. The slick surface of the skate makes moving objects easy!

ITI Yellow Control Arm Skate is designed for use on a disabled or wrecked vehicle with a missing wheel or lugnuts, a broken ball joint, control arm, axle or other suspension components. The top of this patented skate has a pocket for the ball-joint and cradles the a-frame of the suspension. The rounded ends of this skate allow for easy loading as it will navigate the approach lip of a bed or trailer.

ITI Low Profile Control Arm Skate is designed for use on a disabled or wrecked vehicle with a missing wheel or lugnuts, a broken ball joint, control arm, axle or other suspension components. This skate is perfect for use with high-end vehicles with low clearance concerns. The top of this patented skate has a pocket for the ball-joint and cradles the a-frame of the suspension. The rounded ends of this skate allow for easy loading as it will navigate the approach lip of a bed or trailer.

This ITI Height Extender is designed to work in tandem with the ITI Control Arm Skate (Item #

Utilizing the Pocket Plug Container Skate from ITI makes loading or moving shipping containers slick and easy! Place this patented sea container skate beneath the corner of the container - fitting the raised plug nicely into the oblong pocket of the container. The skate's rounded ends eases the transition from the ground surface to the angle of a rollback carrier or trailer. The slick surface of the skate makes moving objects easy!

ITI Trailer Jack Skate is used when loading or moving trailers. Place the trailer jack pedestal shoe or wheel into the pocket of the skate. The slick surface of the skate allows for more easily moving a trailer by hand - without having to lift the tongue of the trailer off the ground. It also protects parking lots, driveways and warehouse floors from damage or marring. You can utilize this skate when loading a disabled vehicle with a trailer hitch, too! As the vehicle makes the approach up the incline of a trailer or car carrier, this skate can be placed below the hitch to prevent the hitch from gouging the road surface or parking lot, causing unnecessary damage. The slick surface of the skate makes moving objects easy!

ITI Big and Tall Automotive Skates are ideal to use when moving, loading and unloading a locked, disabled or wrecked car or truck with larger tire dimensions. It is also great for use with equipment or tractors with larger tires.

ITI offers a full line of skates for a variety of applications. Their products are known for their durability and reliability. Get acquainted with them with this ITI Rollback Starter Kit. This introductory package includes a pair of Automotive Skates to help move disabled or locked vehicles, as well as a Control Arm Skate for vehicles with wheel impairment or suspension issues. This kit will help get you started down the path to timely and efficient recoveries. Save over buying these skates individually.

This ITI Height Extender is designed to work in tandem with the ITI Control Arm Skate (Item #

This ITI Universal Container Skate makes loading and moving shipping containers easier. When the corner pockets are not accessible, this flat, low profile skate is the tool to use since you can place it anywhere along the bottom of the sea container. The container sits on the flat area of the skate and is winched into position. The skate's tapered end eases the transition from the ground surface to the angle of a rollback carrier or trailer. The slick surface of the skate makes moving objects easy!

All car carrier operators should own the ITI Rollback Standard Kit to assist them on their recovery job. This basic package includes a set of four Automotive Skates to help move disabled or locked vehicles, as well as a Control Arm Skate and Height Extender for vehicles with wheel impairment or suspension issues. ITI skates are known for their durability and reliability. This kit will help you complete your next call in a timely and efficient manner. Save over buying these skates individually.

ITI has produced a yellow Signature Series of its popular line of skates to help tow operators identify them in low-light situations and, therefore, keep better control of them under a pull. They are made from the same durable material as ITI s traditional, earth-tone line of skates but offer greater visibility at night and better contrast against gravel and dirty road surfaces. To make sure you have the right skate for the job, ITI has assembled this line of yellow skates into a Rollback Essentials Kit. Included are a set of four automotive skates for use with most passenger vehicles. The kit also features a control arm skate suited for vehicles with wheel impairment or suspension issues as well as two extensions: one for additional clearance and another for trailer axles. Save over buying these skates individually.

This ITI Height Extender is designed to work specifically with the the ITI Low Profile Control Arm Skate (Item #

This ITI Machinery Skate is designed specifically for moving equipment and other heavy machinery. These ITI Skates will drastically reduce the moving resistance allowing for easier placement of heavier equipment while protecting the floor. The low-profile design features a beveled cutout on the skate surface to cradle machinery legs, when needed. Flip this skate upside down and use it as a loading ramp to provide a tapered approach.

ITI Axle Tube Height Extender works in tandem with the ITI Standard Control Arm Skate (Item #

ITI XL Big and Tall Automotive Skates are ideal to use when moving, loading and unloading a locked, disabled or wrecked car or truck with larger tire dimensions. This XL skate is 5 inches longer than the standard "Big & Tall" skate - perfect for the oversized pick-up truck tires. It is also great for use with equipment or tractors with larger tires.

The Flush End Container Skate from ITI makes loading or moving shipping containers slick and easy! This container skate is unique in that it is designed to sit flush to the edge of the shipping container. This allows for closer side-by-side storage of the containers when in a storage yard. This patented skate has a low-profile design allowing a lower overall height of the container when loaded on a trailer or a flatbed on a truck. Place the sea container skate beneath the corner of the container - fitting the raised plug nicely into the oblong pocket of the container. The skate's rounded ends eases the transition from the ground surface to the angle of a rollback carrier or trailer. The slick surface of the skate makes moving objects easy!

ITI Crossmember Container Skate makes loading and moving shipping containers easier. When the corner pockets are not accessible due to dirt, mud or debris - this handy skate is the tool to use. Simply find a crossmember on the bottom side of the sea container and place the crossmember into the 4x4 pocket and winch into position. The skate's tapered end eases the transition from the ground surface to the angle of a rollback carrier or trailer. The slick surface of the skate makes moving objects easy!

This Large ITI Machinery Skate is designed specifically for moving equipment and other heavy machinery. These ITI Skates will drastically reduce the moving resistance allowing for easier placement of heavier equipment while protecting the floor. The low-profile design features a beveled cutout on the skate surface to cradle machinery legs, when needed. Flip this skate upside down and use it as a loading ramp to provide a tapered approach.

ITI Lockout Wedges create the necessary gap between the window and door frame to insert lockout tools on a locked vehicle. The tapered design slides past the weatherstripping and then widens as the wedge is pushed deeper. The recycled plastic material is durable for years of reliable use. All products by ITI, formerly I Tow In, Inc., are manufactured in the USA.

Make sure you have what you need for your next call with the ITI Rollback Essentials Kit. ITI skates are known for their durability and reliability when it comes moving locked or disabled vehicles. This kit features a set of four automotive skates for use with most passenger vehicles, and a pair of Big & Tall Skates and a pair of XL Big & Tall Skates for those larger tires found on pickups and SUVs. The kit also includes a control arm skate suited for vehicles with wheel impairment or suspension issues as well as two extensions: one for additional clearance and another for trailer axles. Lastly, the ITI Rollback Essentials Kit comes with a Trailer Jack Skate for moving trailers or protecting receiver hitches. Save over buying these skates individually.

ITI Axle Tube Height Extender works in tandem with the ITI Standard Control Arm Skate (Item #

Heavy trailers can cause quite a bit of problems. When moving them short distances, like onto an industrial trailer or car carrier, or allowing them to sit in the mud for long periods of time, you have to be careful with them. Thanks to the ITI HD Trailer Skate, that's no longer a major issue. This massive, two-piece skate has a 9”x9” recess that's perfect to accept trailer jacks or pedestal legs for short, yet safe passage along different paths.

Make room in your car carrier toolbox for this Rollback Master Kit from ITI. ITI skates are known for their durability and reliability when it comes moving locked or disabled vehicles. This kit features a set of four automotive skates for use with most passenger vehicles, and a pair of Big & Tall Skates and a pair of XL Big & Tall Skates for those larger tires found on pickups and SUVs. The kit also includes a control arm skate suited for vehicles with wheel impairment or suspension issues as well as two extensions: one for additional clearance and another for trailer axles. Lastly, the ITI Rollback Master Kit comes with a Trailer Jack Skate for moving trailers or protecting receiver hitches and a Lockout Wedge for use with door tools. Save over buying these products individually.

ITI Skate Around is a general purpose skate that can be used to move vehicles, equipment, furniture and anything you can imagine. It s low-profile design gives you the versatility to fit in tighter spaces. The slick surface of the skate makes moving objects easy!

There's an easier, safer way to load a semi or truck onto a wrecker. No need to risk double picking a vehicle when it's disabled as you could just use the ITI Heavy Duty Ramp Stand. All you have to do is winch the vehicle onto the ramp stand which lifts it up 2.75". This extra height allows you to easily get the forks underneath the axle. Alternatively, you can drive the vehicle onto the ramp stand, although it's not the preferred method.

Get more stability when sliding a shipping container across a yard or onto a car carrier with the new and improved ITI XL Crossmember Skate. This updated skate is 1.25" longer and nearly 2" wider than the original, giving the operator more control when moving a container by its crossmembers.