Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Due to precise operation in extreme heat or cold, these Series A Circuit
Breaker Switches from Power Up Products have become the vehicle industry
standard for control. They provide extreme reliability in system circuit
protection. These units can be reset by simply turning the switch off and back
on again.
Power Up Products resistor load kit produces the same draw as an incandescent
lamp. Set to flash at a rate determined by the direct current drawn by the
lamp load. Flashes at a rapid rate to indicate the burned out lamp. Each
resistor is rated to 30 watts. Mounting brackets included.
The Auxiliary Power Protector, has the capability to handle the electrical
systems of standard and foreign trucks in one single model. The converter is
the heavy duty type that is built into the circuit board at Power Up Products.
This makes installation a breeze.
Easy-to-handle pistol-grip remote control allows you to easily operate your
auto load wrecker. Also, ideal for use on lifts, medium and heavy
wreckers, side puller controls, or any application where solenoid-operated
valves are used. 20' multi-conductor, blunt-cut PVC-protected flexible cable,
High-impact, with safety yellow housing.
The Touch Basic-6 is an electrical switching control system comprised of a
Power Distribution Center (PDC) and a Keypad (KP-6). The system allows
placement of the PDC in close proximity to the electrical devices that it is to
control for easy installation with short and simple wire runs. The PDC is under
control of a programmable Keypad that can be mounted up to 300 feet away. The
Touch Basic can be used to control auxiliary lighting, PTO's (clutch pump),
strobes, or electrically controlled hydraulic valves.
Custom In Dash Switch Panel, with all switches factory wired and ready to
install. This good-looking overhead panel has finished face plate, replaceable
legends, and LED backlighting. The biggest advantage of this panels is the
circuit breaker switch(s). Each individual switch protects itself with its own
internal circuit breaker.
Custom Overhead Switch Panel, with all switches factory wired and ready to
install. This good-looking overhead panel has finished face plate, replaceable
legends, and LED backlighting. The biggest advantage of this panels is the
circuit breaker switch(s). Each individual switch protects itself with its own
internal circuit breaker.
Custom In Dash Switch Panel, with all switches factory wired and ready to
install. This good-looking in-dash panel has finished face plate, engraved
legends, and LED backlighting. The biggest advantage of this panel is the
circuit breaker switch(s). Each individual switch protects itself with its own
internal circuit breaker. 2008 to current Ford F350/450/550, mounts in dash to
the right of the steering column.
Custom In Dash Switch Panel, with all switches factory wired and ready to
install. This good-looking in-dash panel has finished face plate, engraved
legends, and LED backlighting. The biggest advantage of this panel is the
circuit breaker switch(s). Each individual switch protects itself with its own
internal circuit breaker. 2003 to current Chevrolet/GMC 4500/5500/6500, mounts
in right dash panel below the transmission temperature gauge. Engraved legend
read out left to right, Beacon - Flasher - Work Up - Work Down. Special orders
are required for optional legend configuration.
This is a 20" E-Series LED light bar from Rigid Industries Lighting. This is a combination spot and flood light. This is a high-intensity LED light that has 40 LEDs and is shockproof. This light bar features an easy two-wire installation and puts out 7200 lumens.
A four LED light in a compact 2x2 package that can be used for anything from a
reverse light on a truck, a handlebar light on a Motorcycle, to a flood light
on a trailer. With 1100 lumens* of light, this small light has the same light
output as a 50 watt MR16. At a small 3"-3" size, this light can fit anywhere.
Pulling only 10 watts this makes a very efficient, compact light source. This
light pulls half of what your stock turn signals use.
Custom In Dash Switch Panel, with all switches factory wired and ready to
install. This good-looking in-dash panel has finished face plate, engraved
legends, and LED backlighting. The biggest advantage of this panel is the
circuit breaker switch(s). Each individual switch protects itself with its own
internal circuit breaker. 2008 to current Ford F350/450/550, mounts in dash to
the right of the steering column.
Custom In Dash Switch Panel, with all switches factory wired and ready to
install. This good-looking in-dash panel has finished face plate, engraved
legends, and LED backlighting. The biggest advantage of this panel is the
circuit breaker switch(s). Each individual switch protects itself with its own
internal circuit breaker. 2008 to current Dodge/Sterling D3500/4500/5500,
mounts in dash to the right of the steering column. Available with up to 5
switches.
This In Dash Switch Panel from Power Up Products comes with all switches
factory wired and ready to install. This good looking in dash panel has a
finished face plate, engraved legends and LED backlighting. The big advantage
of this panel is the circuit breaker switches. Each individual switch protects
itself with its own internal circuit breaker. Switch panel mounts in the right
dash panel below the transmission temperature gauge of 2003 to current
Chevrolet/GMC 4500/5500/6500 trucks.
These are all circuit breaker switch panels are made by Power Up Products.
These switch panels feature magnetic circuit breaker switches with 20 Amp and
50 Amp current capacities. They have standard LED two-stage red back lighting
with white, amber, green, and blue back lighting options by special order. They
feature a laser cut plastic, smooth faceplate with wear resistant engraved
switch legends. Fits on the right side of the center dash console.
Custom In Dash Switch Panel, with all switches factory wired and ready to
install. This good-looking in-dash panel has finished face plate, engraved
legends, and LED backlighting. The biggest advantage of this panel is the
circuit breaker switch(s). Each individual switch protects itself with its own
internal circuit breaker. 2003 to current Chevrolet/GMC 4500/5500/6500, mounts
in right dash panel where the transmission temperature gauge would be. Engraved
legend read out top to bottom, Beacon - Flasher - Work Up - Work Down - Aux.
Special orders are required for optional legend configuration.
Custom In Dash Switch Panel, with all switches factory wired and ready to
install. This good-looking in-dash panel has finished face plate, engraved
legends, and LED backlighting. The biggest advantage of this panel is the
circuit breaker switch(s). Each individual switch protects itself with its own
internal circuit breaker. 2008 to current Dodge/Sterling D3500/4500/5500,
mounts in dash below the radio. Available with up to 3 switches.
These are all circuit breaker switch panels are made by Power Up Products.
These switch panels feature magnetic circuit breaker switches with 20 Amp and
50 Amp current capacities. They have standard LED two-stage red back lighting
with white, amber, green, and blue back lighting options by special order. They
feature a laser cut plastic, smooth faceplate with wear resistant engraved
switch legends. Fits on the left side of the center dash console.
The SR-Series PRO LED Light Bars provide a sleek, low profile lighting solution
that measures less than 2inches tall. Thanks to improved LED technology, the
SR-Series PRO now offers more light output than ever before with up to 111%
more raw lumens. As the name implies, the SR-Series PRO utilizes a single row
of LEDs with your choice of Hybrid or patented Specter optics in a variety of
beam patterns. Ideal for applications where space is limited, the SR-Series PRO
is a powerful light source designed to project light at extreme distances while
consuming very little power.
Custom In Dash Switch Panel, with all switches factory wired and ready to
install. This good-looking in-dash panel has finished face plate, engraved
legends, and LED backlighting. The biggest advantage of this panel is the
circuit breaker switch(s). Each individual switch protects itself with its own
internal circuit breaker. 2008 to current Dodge/Sterling D3500/4500/5500,
mounts in dash to the left of the steering column. Available with up to 5
switches.
Custom In Dash Switch Panel, with all switches factory wired and ready to
install. This good-looking in-dash panel has finished face plate, engraved
legends, and LED backlighting. The biggest advantage of this panel is the
circuit breaker switch(s). Each individual switch protects itself with its own
internal circuit breaker. 2008 to current Ford F350/450/550, mounts in dash to
the left of the steering column.
Custom In Dash Switch Panel, with all switches factory wired and ready to
install. This good-looking in-dash panel has finished face plate, engraved
legends, and LED backlighting. The biggest advantage of this panel is the
circuit breaker switch(s). Each individual switch protects itself with its own
internal circuit breaker. 2008 to current Dodge/Sterling D3500/4500/5500,
mounts in dash to the left of the steering column. Available with up to 5
switches.
Custom Overhead Switch Panel, with all switches factory wired and ready to
install. This good-looking overhead panel has finished face plate, replaceable
legends, and LED backlighting. The biggest advantage of this panels is the
circuit breaker switch(s). Each individual switch protects itself with its own
internal circuit breaker.
Custom In Dash Switch Panel, with all switches factory wired and ready to
install. This good-looking in-dash panel has finished face plate, engraved
legends, and LED backlighting. The biggest advantage of this panel is the
circuit breaker switch(s). Each individual switch protects itself with its own
internal circuit breaker. 1999 to current Ford F350/450/550, mounts in dash to
the right of the steering column. As this panel has engraved legends it is a
special order, and will require up to 2 weeks for delivery. Please send us an
e-mail with your order for proper legend layout.
Custom In Dash Switch Panel, with all switches factory wired and ready to
install. This good-looking in-dash panel has finished face plate, engraved
legends, and LED backlighting. The biggest advantage of this panel is the
circuit breaker switch(s). Each individual switch protects itself with its own
internal circuit breaker. 2011 to current Dodge 2500/3500/4500/5500,
mounts in dash to the right of the steering column on the left and right side
of the temp controls. Available with up to 6 switches.