Trux Accessories

Grab everyone's attention with colorful accent lighting from Trux Accessories. These glow strip LEDs can complement any truck body moulding, illuminate the ground or add color to interior storage bays. These powerful 12V strips feature LED diodes, making them brighter than traditional incandescent lights.

This marker is an amber LED G4 marker light. The light is D.O.T. compliant and is built with a polycarbonate lens which is resistant to cracks and damage.

These 66" Poly Half Fenders with rolled edges are designed to withstand the nastiest of conditions. The fenders are high quality polyethylene which has been tested & proven to resist chemical spills & UV rays.

These TLED-2X dual revolution marker lights to auxiliary LED lights include 7 diodes and are D.O.T compliant. The marker to auxiliary LED lights are built with a polycarbonate lens which is resistant to cracks and damage.

These marker to auxiliary LED lights are industry leading dual revolution technology. They are protected by a polycarbonate lens which is resistant to cracks and damage and the lights are D.O.T compliant to auxiliary funcion all in one.

The THUB-RP33 is a chrome ABS plastic rear axle cover kit with removable center cap and 33mm threaded nut covers. With its high quality ABS chrome plastic, it cleans effortlessly, is high impact, light weight and flexable.

These dual revolution twist on lights function as marker to auxiliary LED lights. The LED is D.O.T. compliant to auxiliary function all in one. They are built to last with a polycarbonate lens which is resistant to cracks and damage.

These lights are an industry leading dual revolution turn signal and marker light to auxiliary LED light. The light is D.O.T. compliant to auxiliary funtion all in one. The dual revolution lights are built to last with a polycarbonate lens which is resistant to cracks and damage.

This light is an industry leading dual revolution technology. This is D.O.T compliant to auxiliary function all in one light. This marker to auxiliary LED light is built with a polycarbonate lens which is resistant to cracks and damage.

The TRX-SPC8 is a 60" or 66" stainless steel half fender kit, including mounting hardware. It is designed to fit 43.5 or 46.5" O.D tires.

The TLED-W4 is a 6" rectangle 'Strobe Series' spot LED work lamp with an amber strobe. This work lamp has a universal fit for a wide range of applications.

Twist on Dual Revolution Marker to Auxiliary LED Light with reflector. Designed to fit standard 3/4" hole (will not fit Aerodynamic Trucks). Includes chrome bezel and 2 gaskets with 3 male bullet plugs.

This kit is a complete chrome ABS plastic front and rear axle and nut cover kit. This kit includes and easy installation process with a reusable installation wrench. By removing 2 lug nuts opposite from each other you can install the axle covers, then reinstall the two lug nuts and add the chrome finish nut covers over the lug nuts.

The Trux front hubcaps are designed to fit oiled axles only, and includes 4, 5, and 6 notchs and clips. The hubcap includes easy installation; align the notches to front wheel tabs and push gently until it locks in place.

These marker to auxiliary LED G4 lights are industry leading dual revolution lights. They are D.O.T. compliant to auxiliary function all in one. It is built with a polycarbonate lens which is resistant to cracks and damage.

The THUB-FRP33 is a chrome ABS plastic front axle cover kit with removable center cap and 33mm threaded nut covers. With its high quality ABS chrome plastic, it cleans effortlessly, is high impact, light weight and flexable.

The LED reflection headlights are super bright high and low beam lights with 670 effective lumens. This light is significatly brighter than halogen headlights and is D.O.T. compliant.

The lights are dual revolution watermelon lights functioning as a clearance and marker light to an Auxiliary LED light. The light is DOT compliant to auxiliary function all in one. It is built to last with a polycarbonate lens resistant to cracks and damage.

Trux Accessories stainless steel half fender mounting kit with triangular undermounts. The following items are included in this kit: (2) triangular mounting brackets, (2) triangular fender arms(14 ga), (2) threaded post mount tubes, (2) clamps.

The TLED-U120 is a 4.25" square 'Radiant Series' combination spot & flood LED work lamp with 24 side facing diodes providign 360 degrees of side light output. The combinatin light is built to last with a polycarbonate lens which is resistant to cracks and damage.

These lights are 4"x6" LED projector headlights with super bright beam with 850 effective lumens. The headlights meet FMVSS-108 & CMVSS-108 standards.

The TLED-4100R includes three functions: stop, turn and tail LED brake light. The light is protected using a polycarbonate lens which is resistant to cracks and damage and is D.O.T compliant.

These lights include three functions: stop, turn and tail LED brake lights with the option of a flange mount. The light is protected using a polycarbonate lens which is resistant to cracks and damage and is D.O.T compliant.

The TLED-B2CA is a 3/4" clear amber LED marker light. This light is DOT compliant and is made with a polycarbonate lens which is resistant to cracks and damage.

These lights includes four functions: stop, turn, tail, and white back-up LED lights with the option of a flange mount. The light is protected by a polycarbonate lens which is resistant to cracks and damage and is D.O.T compliant to auxiliary function all in one.