Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
This is a Miller Industries Control Box hood for the Passenger side of any
Century/Vulcan Car Carrier 2005 & newer (Excluding LCG). It houses a 5-spool
system and is a black, steel finish.
This round, push in style light can be used as a license plate light or a control panel light. It is commonly used on the Mounting and Tilt Frame Assembly of several Miller Car Carriers, including Century, Challenger, Champion, Holmes, and Vulcan. See the features below for a list of assemblies and see the brochure tab for breakdowns. This part can be used to replace Part Number 12-0300867.
Buyers Products 5 Inch Incandescent Flood Light has a sealed rubber housing and
a blunt cut connection. It sits on a zinc-plated mount and has a 10 in. lead
length. The 35W light is IP67 rated for water and dust resistance.
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
Our popular SL-9 magnetic tow light kit comes with two sealed beam truck lights
in a rubber housing, plastic-housed magnets, and 30' of 4 - wire cable all
pre-wired into the male plug. The kit also includes a plastic carrying case
and the female plug. The flexible cable is 16 gauge wire with "Yukon Weather
Proven" outer and inner jackets.
This is a Miller Industriels Long Control Handle for a Car Carrier. It the center handle on a 5 spool system. This part can be used to replace Part Number 12-0801566.
This is a Miller Industries Long Control Handle for a Car Carrier. It is the forward outer handle on a 5 spool system. This part can be used to replace Part Number 12-0800796.
This Control Rod End Link from Miller Industries is used on the Control and
Crossrod Assembly. It is commonly used on control rods of Century 19' Carriers.
This control rod is used with Century 15 Series 2 and 3 Car Carriers, Champion
Aluminum and Steel Car Carriers and Vulcan 10 Series Aluminum and Steel Car
Carriers.
This is a Miller Industries Control Box hood for the passenger side of any
Century/Vulcan Car Carrier prior to 2005 (Excluding LCG). It houses a 5-spool
system and is a steel finish.
This is a Miller Industriels Long Control Handle for a Car Carrier. It the center handle on a 5 spool system. This part can be used to replace Part Number 12-0801566.
This Control Rod End Link from Miller Industries is used on the Control and
Crossrod Assembly. It is commonly used on control rods of Century 19' Carriers.
This control rod is used with Century 15 Series 2 and 3 Car Carriers, Champion
Aluminum and Steel Car Carriers and Vulcan 10 Series Aluminum and Steel Car
Carriers.
This is a Miller Industries Long Control Handle for a Car Carrier. It is the forward outer handle on a 5 spool system. This part can be used to replace Part Number 12-0800796.
This is a Miller Industries Decal Plate for the driver side control box hood.
It is designed for all Century/Vulcan Car Carriers (Excluding LCG). It labels
all the levers of a 5-spool system.
This is a Miller Industries Decal Plate for the passenger side control box
hood. It is designed for all Century/Vulcan Car Carriers prior to 2005
(Excluding LCG). It labels all the levers of a 5-spool system.
This is a Miller Industries Control Box hood for the driver side of any
Century/Vulcan Car Carrier prior to 2005 (Excluding LCG). It houses a 5-spool
system and is a steel finish.
This is a Miller Industries Control Box hood for the passenger side of any
Century/Vulcan Car Carrier prior to 2005 (Excluding LCG). It houses a 5-spool
system and is a steel finish.
This is a Miller Industriels Long Control Handle for a Car Carrier. It the center handle on a 5 spool system. This part can be used to replace Part Number 12-0801566.
This Control Rod End Link from Miller Industries is used on the Control and
Crossrod Assembly. It is commonly used on control rods of Century 19' Carriers.
This control rod is used with Century 15 Series 2 and 3 Car Carriers, Champion
Aluminum and Steel Car Carriers and Vulcan 10 Series Aluminum and Steel Car
Carriers.
This is a Miller Industries Long Control Handle for a Car Carrier. It is the forward outer handle on a 5 spool system. This part can be used to replace Part Number 12-0800796.
This is a Miller Industries Decal Plate for the driver side control box hood.
It is designed for all Century/Vulcan Car Carriers (Excluding LCG). It labels
all the levers of a 5-spool system.
This is a Miller Industries Decal Plate for the passenger side control box
hood. It is designed for all Century/Vulcan Car Carriers prior to 2005
(Excluding LCG). It labels all the levers of a 5-spool system.
This is a Miller Industries Control Box hood for the driver side of any
Century/Vulcan Car Carrier prior to 2005 (Excluding LCG). It houses a 5-spool
system and is a steel finish.