This is a Parker 17 Gallon Per Minute Hydraulic Pump at 1600 RPMs. This is a Parker PH14 "A" Mount Pump with a clockwise rotation. This pump features side ports. This pump has a 7/8" tapered shaft with a woodruff keyway. This pump will work with Chevron Wreckers.
BURNISHING-TO AVOID BURNING OR HEAT DISTORTION, THE FOLLOWING PROCEDURE IS RECOMMENDED: After clutch is installed, run at 1000-1200 RPM. Cycle the clutch on/off at the rate of 10 seconds on - 10 seconds off for a minimum of 50-100 cycles.
- Mount: A
- GPM: 17
- Port: Side
- Shaft: 3/4" Taper
- Bolt: 5/16-24 x 1
- Rotation: CW
- Material: Iron
- Model Number: 304-9110-004
- CI: 1.94
- Suction H: 1- 1/4"
- Suction F: 20mb
- Pressure H: 3/4"
- Pressure F: 12mb
- PSI R1: 1800
- PSI R2: 2600
- Seal Kit: 722077
- Shaft Key: 702071
- Thrust Plate: 722070
- Series: PH14
Used in the following kits: 700479, 700485, 700509, 700514, 700530, 700532, 700533, 700534, 700536, 700539, 700547, 700550, 700555, 700556, 700562, 700568, 700572, 700582, 700587, 700590, 700592, 700599, 700601, 700604, 700607, 700609, 700610, 700611, 700612