Free Shipping!
Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
0 Item(s)
You have no items in your shopping cart.
-
- Shop Trucks & Trailers
- Shop Apparel
-
Shop Products
- Shop Products
- Towing Straps & Chains
-
Cargo Control
- Cargo Control
- Ratchet Straps & Tie Downs
- Winch Straps
- Flatbed Winches
- Winch Bars
- Transport Chain
- Transport Chain Hooks
- Chain Binders
- D-Rings & Tie Down Anchors
- Cargo Bars, Load Bars & Shoring Beams
- Utility Strap Assemblies
- Safety Flags
- Oversize & Wide Load Signs
- Measuring Sticks
- Cargo Accessories
- DOT Placards & Labels
- HD Truck Accessories
- Ratchets & Hardware
- Rigging & Recovery Supply
- Auto & Truck Service
- Battery Service
- Winch Lines & Hardware
- Towing Accessories
- Lockout Tools
- Tow Lights
- Emergency & Warning Lighting
- Work & Truck Lighting
- Hoses & Reels
- Safety Supplies
- Winches
- Toolboxes & Storage
-
Truck Chassis Accessories
- Truck Chassis Accessories
- Push Bumpers, Guide Lights, & Hardware
- Cameras
- Seat Covers
- Alarms & Horns
- Wheel Simulators & Hub Parts
- Tire & Wheel Supply
- Fenders
- Mico Brake Locks
- Mud Flaps
- Push Bumpers, Guide Lights, & Hardware
- Sunvisors & Mirrors
- Spring & Suspension Enhancement
- Throttle Controls
- Running Boards
- Aftermarket Fuel Tanks
- Mobile Office Vehicle Mounts
- Hitches & Accessories
- Cab Protectors & Truck Racks
- Snow Removal, Dump Bodies, & Lift Gates
- Shop Supplies
- Car Hauler Trailer Supply
- Clearance Products
-
Shop Repair Parts
- Shop Repair Parts
- Car Hauler Trailer Parts
-
Car Carrier Parts
- Car Carrier Parts
- Wheel Lift L-Arms, Outer Crosstubes & Hardware
- Pivot Pin Kits
- Wear Pad Kits
- Control Assemblies & Hardware
- Cylinder & Pin Replacement
- Tail Light Assemblies & Wiring Harnesses
- Hydraulic Valve Bodies & Service Parts
- Car Carrier Winch Repair Parts
- Removable Side Rail Replacement
- Bed Lock Hardware & Tie-Down Anchors
- Carrier Light Pylons
- Carrier Body Lighting
-
Light Duty Wrecker Parts
- Light Duty Wrecker Parts
- WheelLift L-Arms, Receivers & Hardware
- Fender Flares & Fender Flares HD
- Boom End Sheaves, Guides, & Hardware
- Cylinder and Pin Replacement
- Control Hardware
- Control Valve Bodies & Hardware
- Hydraulic Pumps, Outriggers & Repair Parts
- Control Cables & Cable Springs
- Body Lighting
- Wrecker Light Pylons
-
Medium / Heavy Wrecker Parts
- Medium / Heavy Wrecker Parts
- WheelLift L-Arms, Crossbars, Receivers & Hardware HD
- Boom End Sheaves, Guides & Hardware HD
- Cylinder and Pin Replacement HD
- Control Valve Bodies & Hardware HD
- Cable Storage Springs HD
- Remote Controls HD & Control Cables HD
- Body Lighting HD
- Wrecker Light Pylons HD
- Hydraulic Outriggers & Repair Parts HD
- Zacklift Main Body Repair Parts
- Zacklift Inner Main Repair Parts
- Zacklift Horizontal Repair Parts
- Zacklift Grid Head Repair Parts
- Zacklift Mounts & Hardware
- Snow Plow Repair Parts
- Lighting
- Tow Dolly Parts
- Automotive Positioning Dolly Parts
- Hydraulic Hardware
- Electrical Hardware
- Wheel Simulator Repair Parts
- Diesel Emission Products
- Winch Repair Parts
- Toolbox Repair Parts
- Cable & Hose Management Repair Parts
-
Shop by Parts Schematics
Order Direct from a parts diagram
-
- Shop Trucks & Trailers
- Shop Apparel
-
Shop Products
- Shop Products
- Towing Straps & Chains
-
Cargo Control
- Cargo Control
- Ratchet Straps & Tie Downs
- Winch Straps
- Flatbed Winches
- Winch Bars
- Transport Chain
- Transport Chain Hooks
- Chain Binders
- D-Rings & Tie Down Anchors
- Cargo Bars, Load Bars & Shoring Beams
- Utility Strap Assemblies
- Safety Flags
- Oversize & Wide Load Signs
- Measuring Sticks
- Cargo Accessories
- DOT Placards & Labels
- HD Truck Accessories
- Ratchets & Hardware
- Rigging & Recovery Supply
- Auto & Truck Service
- Battery Service
- Winch Lines & Hardware
- Towing Accessories
- Lockout Tools
- Tow Lights
- Emergency & Warning Lighting
- Work & Truck Lighting
- Hoses & Reels
- Safety Supplies
- Winches
- Toolboxes & Storage
-
Truck Chassis Accessories
- Truck Chassis Accessories
- Push Bumpers, Guide Lights, & Hardware
- Cameras
- Seat Covers
- Alarms & Horns
- Wheel Simulators & Hub Parts
- Tire & Wheel Supply
- Fenders
- Mico Brake Locks
- Mud Flaps
- Push Bumpers, Guide Lights, & Hardware
- Sunvisors & Mirrors
- Spring & Suspension Enhancement
- Throttle Controls
- Running Boards
- Aftermarket Fuel Tanks
- Mobile Office Vehicle Mounts
- Hitches & Accessories
- Cab Protectors & Truck Racks
- Snow Removal, Dump Bodies, & Lift Gates
- Shop Supplies
- Car Hauler Trailer Supply
- Clearance Products
-
Shop Repair Parts
- Shop Repair Parts
- Car Hauler Trailer Parts
-
Car Carrier Parts
- Car Carrier Parts
- Wheel Lift L-Arms, Outer Crosstubes & Hardware
- Pivot Pin Kits
- Wear Pad Kits
- Control Assemblies & Hardware
- Cylinder & Pin Replacement
- Tail Light Assemblies & Wiring Harnesses
- Hydraulic Valve Bodies & Service Parts
- Car Carrier Winch Repair Parts
- Removable Side Rail Replacement
- Bed Lock Hardware & Tie-Down Anchors
- Carrier Light Pylons
- Carrier Body Lighting
-
Light Duty Wrecker Parts
- Light Duty Wrecker Parts
- WheelLift L-Arms, Receivers & Hardware
- Fender Flares & Fender Flares HD
- Boom End Sheaves, Guides, & Hardware
- Cylinder and Pin Replacement
- Control Hardware
- Control Valve Bodies & Hardware
- Hydraulic Pumps, Outriggers & Repair Parts
- Control Cables & Cable Springs
- Body Lighting
- Wrecker Light Pylons
-
Medium / Heavy Wrecker Parts
- Medium / Heavy Wrecker Parts
- WheelLift L-Arms, Crossbars, Receivers & Hardware HD
- Boom End Sheaves, Guides & Hardware HD
- Cylinder and Pin Replacement HD
- Control Valve Bodies & Hardware HD
- Cable Storage Springs HD
- Remote Controls HD & Control Cables HD
- Body Lighting HD
- Wrecker Light Pylons HD
- Hydraulic Outriggers & Repair Parts HD
- Zacklift Main Body Repair Parts
- Zacklift Inner Main Repair Parts
- Zacklift Horizontal Repair Parts
- Zacklift Grid Head Repair Parts
- Zacklift Mounts & Hardware
- Snow Plow Repair Parts
- Lighting
- Tow Dolly Parts
- Automotive Positioning Dolly Parts
- Hydraulic Hardware
- Electrical Hardware
- Wheel Simulator Repair Parts
- Diesel Emission Products
- Winch Repair Parts
- Toolbox Repair Parts
- Cable & Hose Management Repair Parts
-
Shop by Parts Schematics
Order Direct from a parts diagram
Looking for apparel? Shop Zip's Outfitters
0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
Boom Support Block Anchor Pin, Holmes 600
This is a replacement boom support block anchor pin for Holmes 600 Wrecker.
$39.99
Weldment Shaft Assembly, Boom Yoke
This is a replacement sheave shaft weldment for the Holmes 750.
$164.99
Holmes Boom End 8" Sheave w/ 1 3/8" Pin Size 750
This is a Boom End Sheave for a Holmes 750 Wrecker. It is 8" in diameter with a
1-3/8" pin size diameter.
$359.99
Fastenal 1/4" - 28 Grease Fitting w/ Ball Check
This straight grease fitting is used to dispense grease into a mating part using a grease gun. It is made from steel with a zinc finish and comes with a ball check. This part has replaced part number
$0.29
Related products
Miller Boom Extension Cylinder Seal Kit Century / Challenger
This Seal Kit from Miller Industries is used as a replacement seal kit for a
Boom Extension Cylinder. It is commonly used on Century 5025T and Challenger
CH-30T/CH-30T3 Wreckers. Please see the brochure tab for breakdowns.
$93.99
Miller Challenger Underlift Extend Cylinder Seal Kit
This Seal Kit from Miller Industries is used on the Underlift Extend Cylinder
of a Challenger CH-45 Wrecker.
$223.99
Miller Boom Lift Cylinder Pin Base End Century / Challenger
This is a replacement boom lift cylinder pin. This is the pin that goes into
the base end of the cylinder to attach the cylinder to the wrecker's subframe
weldment. This pin fits Century 1624, 3224, 4024, Challenger Ch-16 and Ch-20
Medium Duty Wreckers by Miller Industries. To view specific models this pin
fits see Features below. To view the part schematics, see the Brochure tab.
$126.99
Miller Seal Kit Challenger 6807 T50 Wrecker
This Seal Kit from Miller Industries is used with Underlift Tilt Cylinder
$122.99
Miller Boom Lift Cylinder Century and Challenger HD Wrecker
This is a replacement boom lift cylinder for the Century and Challenger heavy
duty integrated wrecker by Miller Industries. This is the cylinder that raises
and lowers the boom on your wrecker. This cylinder connects to the subframe and
to the outer boom weldment of your wrecker. It is also designed for the right
or left position on the wrecker. To view the models this cylinder fits, See
Features below. To view the part schematics, see the Brochure tab.
$5,091.99
Miller Seal Kit
This Seal Kit from Miller Industries is used on Underlift Extend Hydraulic
Cylinder
$306.99
Miller Boom Extend Cylinder Front Pin Century 3212 and Vulcan V30
This is a replacement boom extend cylinder pin for the Century 3212 and Vulcan
V30 heavy duty integrated wreckers by Miller Industries. This pin is used on
the base end of the cylinder and attaches the boom extend cylinder to the outer
boom weldment. This is the boom extend cylinder pin that is towards the front
of the wrecker. To view the models this wrecker fits, see Features below. To
view the part schematics, see the Brochure tab.
$204.99
Miller Fold Cylinder Pin Weldment Base End Century / Challenger
This is a replacement base end fold cylinder pin weldment for Century and Challenger heavy duty wreckers by Miller Industries. This is the pin that attaches the base end of the fold cylinder to the underlift tower weldment of the wrecker. This pin fits the Century 1624, 5130/5230, 7035, 9055, the Century CH-32, CH-35, and the CH-45 wreckers. This part can be used to replace Part Number 12-0802220.
$126.99
Miller Boom Lift Lower Cylinder Pin Century Wreckers
This is a replacement boom lift cylinder lower pin for the Century 1130/1140,
7035, 9055, and Challenger CH-35 and CH-45 heavy duty wreckers by Miller
Industries. This pin connects the boom lift cylinder to the subframe of the
wrecker. To view the models this pin fits, see Features below. To view the part
schematics, see the Brochure tab.
$276.99
Miller Boom Lift Lower Cylinder Pin Century and Challenger HD Wreckers
This is a replacement boom lift cylinder lower pin on Century and Challenger
Heavy Duty Integrated Wreckers by Miller Industries. This pin goes through the
base end of the cylinder and attaches the lift cylinder to the subframe of the
wrecker. To view the models this pin fits, see Features below. To view the part
schematics, see the Brochure tab.
$185.99
Miller Boom Lift Cylinder Pin Century 3212 HD Wrecker
This is a replacement boom lift cylinder pin for the Century 3212 heavy duty
integrated wrecker by Miller Industries. This pin attaches the lift cylinder to
the main recovery boom outer weldment. To view the part schematics, see the
Brochure tab.
$90.99
Miller Boom Elevation Cylinder Seal Kit Century Wreckers
This Boom Elevation Cylinder from Miller Industries is used on the Hydraulic
Cylinders Assembly of Century 5025 and 5030 Wreckers. It is also used on the
Hydraulic Cylinders Assembly of Challenger CH-30T/CH-30T3 Wreckers. Please see
the features below for a list of wreckers and see the brochure tab for
breakdowns.
$70.99
Miller Boom Fold Cylinder Century Wreckers
This Boom Fold Cylinder from Miller Industries is used on the Underlift
Assembly of Century and Challenger Wreckers. Seal Kit is
$896.99
Miller Boom Lift Cylinder Upper Pivot Pin Century and Challenger HD Wreckers
This is a replacement boom lift cylinder upper pivot pin for the Century 7035,
9055, Challenger CH-35 and CH-45 heavy duty wreckers by Miller Industries. This
pin connects the boom lift cylinder to the outer boom weldment of the wrecker.
To view the models this pin fits, see Features below. To view the part
schematics, see the Brochure tab.
$222.99
Miller Pin Weldment Lower Lift Cylinder
This is a lower lift cylinder pin weldment from Miller Industries.
$103.99
Miller Boom Extension Cylinder Seal Kit Century / Challenger
This Seal Kit from Miller Industries is used as a replacement seal kit for a
Boom Extension Cylinder. It is commonly used on Century 5025T and Challenger
CH-30T/CH-30T3 Wreckers. Please see the brochure tab for breakdowns.
$93.99
Miller Challenger Underlift Extend Cylinder Seal Kit
This Seal Kit from Miller Industries is used on the Underlift Extend Cylinder
of a Challenger CH-45 Wrecker.
$223.99
Miller Boom Lift Cylinder Pin Base End Century / Challenger
This is a replacement boom lift cylinder pin. This is the pin that goes into
the base end of the cylinder to attach the cylinder to the wrecker's subframe
weldment. This pin fits Century 1624, 3224, 4024, Challenger Ch-16 and Ch-20
Medium Duty Wreckers by Miller Industries. To view specific models this pin
fits see Features below. To view the part schematics, see the Brochure tab.
$126.99
Miller Seal Kit Challenger 6807 T50 Wrecker
This Seal Kit from Miller Industries is used with Underlift Tilt Cylinder
$122.99
Miller Boom Lift Cylinder Century and Challenger HD Wrecker
This is a replacement boom lift cylinder for the Century and Challenger heavy
duty integrated wrecker by Miller Industries. This is the cylinder that raises
and lowers the boom on your wrecker. This cylinder connects to the subframe and
to the outer boom weldment of your wrecker. It is also designed for the right
or left position on the wrecker. To view the models this cylinder fits, See
Features below. To view the part schematics, see the Brochure tab.
$5,091.99
Miller Seal Kit
This Seal Kit from Miller Industries is used on Underlift Extend Hydraulic
Cylinder
$306.99
Miller Boom Extend Cylinder Front Pin Century 3212 and Vulcan V30
This is a replacement boom extend cylinder pin for the Century 3212 and Vulcan
V30 heavy duty integrated wreckers by Miller Industries. This pin is used on
the base end of the cylinder and attaches the boom extend cylinder to the outer
boom weldment. This is the boom extend cylinder pin that is towards the front
of the wrecker. To view the models this wrecker fits, see Features below. To
view the part schematics, see the Brochure tab.
$204.99
Miller Fold Cylinder Pin Weldment Base End Century / Challenger
This is a replacement base end fold cylinder pin weldment for Century and Challenger heavy duty wreckers by Miller Industries. This is the pin that attaches the base end of the fold cylinder to the underlift tower weldment of the wrecker. This pin fits the Century 1624, 5130/5230, 7035, 9055, the Century CH-32, CH-35, and the CH-45 wreckers. This part can be used to replace Part Number 12-0802220.
$126.99
Miller Boom Lift Lower Cylinder Pin Century Wreckers
This is a replacement boom lift cylinder lower pin for the Century 1130/1140,
7035, 9055, and Challenger CH-35 and CH-45 heavy duty wreckers by Miller
Industries. This pin connects the boom lift cylinder to the subframe of the
wrecker. To view the models this pin fits, see Features below. To view the part
schematics, see the Brochure tab.
$276.99
Miller Boom Lift Lower Cylinder Pin Century and Challenger HD Wreckers
This is a replacement boom lift cylinder lower pin on Century and Challenger
Heavy Duty Integrated Wreckers by Miller Industries. This pin goes through the
base end of the cylinder and attaches the lift cylinder to the subframe of the
wrecker. To view the models this pin fits, see Features below. To view the part
schematics, see the Brochure tab.
$185.99
Miller Boom Lift Cylinder Pin Century 3212 HD Wrecker
This is a replacement boom lift cylinder pin for the Century 3212 heavy duty
integrated wrecker by Miller Industries. This pin attaches the lift cylinder to
the main recovery boom outer weldment. To view the part schematics, see the
Brochure tab.
$90.99
Miller Boom Elevation Cylinder Seal Kit Century Wreckers
This Boom Elevation Cylinder from Miller Industries is used on the Hydraulic
Cylinders Assembly of Century 5025 and 5030 Wreckers. It is also used on the
Hydraulic Cylinders Assembly of Challenger CH-30T/CH-30T3 Wreckers. Please see
the features below for a list of wreckers and see the brochure tab for
breakdowns.
$70.99
Miller Boom Fold Cylinder Century Wreckers
This Boom Fold Cylinder from Miller Industries is used on the Underlift
Assembly of Century and Challenger Wreckers. Seal Kit is
$896.99
Miller Boom Lift Cylinder Upper Pivot Pin Century and Challenger HD Wreckers
This is a replacement boom lift cylinder upper pivot pin for the Century 7035,
9055, Challenger CH-35 and CH-45 heavy duty wreckers by Miller Industries. This
pin connects the boom lift cylinder to the outer boom weldment of the wrecker.
To view the models this pin fits, see Features below. To view the part
schematics, see the Brochure tab.
$222.99
Miller Pin Weldment Lower Lift Cylinder
This is a lower lift cylinder pin weldment from Miller Industries.
$103.99
Newsletter
Information
Product Support
Customer service
Copyright © 2025 Zip's. All Rights Reserved. Seller reserves the right to adjust prices or correct errors. Privacy Policy
