Holmes

This is the Wheel Lift Tilt Cylinder Pin for the Holmes 440 Series / DFT 400 light duty wreckers by Miller Industries. This pin goes through the rod end of the cylinder. This pin attaches the tilt cylinder to the outer wheel lift boom. To view the part schematic click on the Brochure tab. This part can be used to replace Part Number 12-0801010.

Boom End Sheave for Holmes 600 & 500 Boom Ends. 6" sheave with 1 3/16" diameter pin size.

Equip your Holmes TSV towing and service truck with this towing accessory kit. This all -inclusive kit provides everything you need to properly tow most autos down the road. It includes Collins zinc-plated tow dollies with aluminum axles, auto-positioning dollies from Go-Jak, and a Towmate wireless towlight. Also included are mounting brackets specifically designed for all the accessories to be efficiently stored on the Holmes TSV.

Plunger Pin Kit for Holmes TS-100 tow sling. 5/8" diameter pins.

This is a Boom End Sheave for a Holmes 750 Wrecker. It is 8" in diameter with a 1-3/8" pin size diameter.

Plunger Pin Assembly for Holmes TH-295 truck hitch 1.250" pin.

Bearing for the jackshaft assembly on the Holmes 500,600, and 750

This is a Boom End Yoke for a Holmes 750 Wrecker.

RR-940 Side Control repair kit.

This is a replacement 72" control cable for a Holmes wrecker from Protech. This cable will work for the "Boom" or "Winch" functions. The cable has a 2" stroke and works with Holmes wreckers with modular controls.

Plunger Pin Assembly for Holmes TH-185 truck hitch 1" diameter pin.

Boom End Yoke Cable Guide for Holmes 600.

CONTROL CABLES BY CABLECRAFT. REPLACEMENT PUSH-PULL CONTROL CABLES FOR HOLMES AND CENTURY USES.

Wheel Lift Anchor Spade, Holmes DFT-200. The wheel lift spade is designed to fit over the outer tube of the wheel lift and use the downward force of the wheel lift to anchor the truck while winching.

CONTROL CABLES BY CABLECRAFT. REPLACEMENT PUSH-PULL CONTROL CABLES FOR HOLMES AND CENTURY USES.

Holmes jack shaft.

This boom support cable is a strong cable. Capable of handling up to 3,800 pounds, the All-Grip Boom Support Cable 7/16" x 43' has an EIP fiber core wire rope. This makes it extra durable.

RR-932 Handle Assembly for Holmes 600 and 750 with side controls

This is a upper tilt cylinder pin for a Holmes 220 Snatcher.

There are wreckers and older equipment that still require the use of Boom Support lines. These cables from All-Grip are the same as factory replacements. Constructed of 6 x 19 Eip Fibercore wire rope with a flemished thimbled eye at one end while the other end is plain.

There are wreckers and older equipment that still require the use of Boom Support lines. These cables from All-Grip are the same as factory replacements. Constructed of 6 x 19 Eip Fibercore wire rope with a flemished thimbled eye at one end while the other end is plain. This part can be used to replace Part Number CF-181.

There are wreckers and older equipment that still require the use of Boom Support lines. These cables from All-Grip are the same as factory replacements. Constructed of 6 x 19 Eip Fibercore wire rope with a flemished thimbled eye at one end while the other end is plain.

This is a Miller manual owners Holmes, 440.

Control Cables by CableCraft. Replacement Push-Pull Control Cables for Holmes and Century uses.

This is the Tilt Cylinder on the Holmes DFT-200 Wheel Lift by Miller Industries. This is the cylinder that tilts the wheel lift on your wrecker up and down. This cylinder has a 5" bore. This part can be used to replace Part Number GR-3C.

This is a replacement sheave shaft weldment for the Holmes 440.

This is a replacment worm gear assembly.

There are wreckers and older equipment that still require the use of Boom Support lines. These cables from All-Grip are the same as factory replacements. Constructed of 6 x 19 Eip Fibercore wire rope with a flemished thimbled eye at one end while the other end is plain.

This is a replacement boom anchor pin for Holmes wreckers.

This is the Standard Boom Lock Kit for a Holmes 600 Wrecker. This pin is used to hold the 2 booms together. You can pull this pin to unlock the 2 booms and rotate the booms to the side if you have a side pull situation. This kit includes a plunger pin, spring, and pull grip handle assembly.

This is the Wrecker Boom Lift Cylinder Pin for the Holmes HP 552 light duty wrecker by Miller Industries. This pin goes through the base end of the lift cylinder. This pin is used to connect the boom lift cylinder to the wrecker subframe weldment. To view the part schematic click on the Brochure tab.

There are wreckers and older equipment that still require the use of Boom Support lines. These cables from All-Grip are the same as factory replacements. Constructed of 6 x 19 Eip Fibercore wire rope with a flemished thimbled eye at one end while the other end is plain.

This is a replacement Boom Heel Pin.

CONTROL CABLES BY CABLECRAFT. REPLACEMENT PUSH-PULL CONTROL CABLES FOR HOLMES AND CENTURY USES.

This is a replacement Boom and Frame Support Pin.

CONTROL CABLES BY CABLECRAFT. REPLACEMENT PUSH-PULL CONTROL CABLES FOR HOLMES AND CENTURY USES.

Replacement Bolster Saddle Pin for Holmes Wrecker.

This is a replacement 72" control cable for a Holmes wrecker from Protech. This cable will work for the "Boom" or "Winch" functions. The cable has a 2" stroke and works with Holmes wreckers with modular controls.

Holmes wodmt bellcr shaft assembly.

This is the boom pivot pin for a Holmes 440 Series by Miller Industries. See Brochures for a reference chart and features for related parts.

CONTROL CABLES BY CABLECRAFT. REPLACEMENT PUSH-PULL CONTROL CABLES FOR HOLMES AND CENTURY USES.

This is a replacement 72" control cable for a Holmes wrecker from Protech. This cable will work for the "Boom" or "Winch" functions. The cable has a 2" stroke and works with Holmes wreckers with modular controls.

This is a replacement 72" control cable for a Holmes wrecker from Protech. This cable will work for the "Boom" or "Winch" functions. The cable has a 2" stroke and works with Holmes wreckers with modular controls.

This is a replacement 72" control cable for a Holmes wrecker from Protech. This cable will work for the "Boom" or "Winch" functions. The cable has a 2" stroke and works with Holmes wreckers with modular controls.