Zip's Holmes Wheel Lift Anchor Spade

This fork from Miller Industreis is Cast Steel Alloy. These forks are made in one piece using a special process in cast steel. The yield strength has been increased almost two fold while making them almost 30% lighter than the old design forks.

This cast steel alloy Fork from Miller Industries is used to pick up from the leaf spring, axle or frame. Making these forks from one piece of cast steel has increased the yield strength almost two fold while also making them 30% lighter than the old fork designs. This fork has a 4-1/2" wide opening, 2" diameter shaft and has a 6-1/4" clearance between the fork holder and the bottom of the fork cutout.

This Short 4-1/2" Fork from Miller Industries is used to pick up from the leaf spring, axle or frame. These Forks are made from one piece of cast alloy steel that increases the yield strength almost two fold while also making them 30% lighter than the old fork designs. This fork has a 4-1/2" wide opening, a 2" diameter shaft and a 3" clearance between the fork holder and the bottom of the fork cutout.

Cast Steel Alloy Forks, these forks are made in one piece using a special process in cast steel. The yield strength has been increased almost two fold while making them almost 30% lighter than the old design forks.

Cast Steel Alloy Forks from Miller Industries are used when clearance is needed on a vehicle with a low front end. These forks are made in one piece using a special cast steel process. There is a 4-1/2" wide opening at the top of the fork and the shaft has a diameter or 2". There is a 9" clearance between the fork holder and the bottom of the fork cutout. The yield strength has been increased while making them almost 30% lighter than the old fork designs.

Endless synthetic slings are made from a continuous loop of polyester and jacketed in a double layer of polyester. Internal red warning fibers alert you of damage should the sling become torn or damaged.

With 17 different sizes, you can find one of Crosby’s Anchor Shackle Screw Pin for you. So, for whatever situation you need it, you can pick one up for it. Plus it’s forged, quenched and tempered, with alloy bolts. Also, the sizes that are 3/8"" and below are mechanically galvanized, making it even more durable.

Chafe-Pro's standard abrasion protective nylon sleeve is made from a tubular textile abrasion resistant nylon. They are the most economical option for managing, containing and protecting your synthetic rope. This material is sold by the foot.

AmSteel-Blue Synthetic Rope is a proven alternative to steel cables and steel winch lines. Size-for-size, AmSteel-Blue is the same strength as steel wire rope - yet it floats! These 12-strand, single braid winch lines yield the maximum in strength-to-weight ratio and are torque free. Meaning attachment hardware with a swivel is not necessary. AmSteel-Blue has extremely limited stretching - only 1% at full WLL (4:1). Also, AmSteel-Blue Rope has superior flex fatigue and is abrasion resistant. When compared to steel cables, AmSteel-Blue Winch Lines are a fraction of the weight. For example, a 3/4 " x 100' steel cable weighs 100 lbs while an AmSteel-Blue rope with the same dimensions only weighs 13.3 lbs - almost 8 times lighter! Just think about how much easier the handling of the synthetic Amsteel-Blue is for your operators verses a steel cable. Also, it drastically cuts down on the overall weight of your truck - especially heavy duty rotator wreckers which have up to 5 to 6 winches!

Screw pin anchor shackles from Zip's are made from forged alloy steel and feature an open throat design that requires no tools to operate. The shackles are available in seven sizes and are stamped with the size and capacity. See the drop-down menu for available sizes and working load limits.

Sling hooks from Zip?s are made from Grade 100 alloy steel and are approved for overhead lifting. A clevis pin allows for attachment to chain, and the size and grade are stamped on the side of the hook. A spring latch provides a secure connection. See the drop-down menu for available sizes and working load limits.

Zip's Eye/Eye Round Slings feature a Safety Factor of 5:1. The inner core is made from high-tensile polyester fiber to provide the maximum possible strength. Each sling is color coded according to capacity. See drop down menu for available lengths. See chart for sling capacity.

Zip's Built Anchor Spade is a custom-fit accessory designed for Miller Industries 10 Series and 12 Series LCG Car Carriers. This spade fits over the rear bed stabilizer pad of the car carrier. This attachment fits both the Right and Left Stabilizer Leg.

Get your rigging or recovery job done right with the easy and convenience of round slings. This kit, from Miller Industries, includes 8 endless round slings; two 4 and 6 foot yellow slings with a 16,800 lb. work load limit and two 8 and 12 foot red slings with a 26,400 lb. work load limit. All of these slings are made from polyester yarn covered by a double wall tubular jacket. They are seamless and have a soft cover that won't scratch a loads surface. They are light weight and pliable for easy rigging and storage.