0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
Miller Deck Mount Pylons 10 12 15 16 Series
These Car Carrier Pylons are used with Miller Century, Champion, Challenger,
Holmes, and Vulcan Rollbacks. They fit 10, 12, 15, and 16 Series beds. These
deck mounted pylons come in a variety of heights from 38" to 68". Car Carrier
Pylons are commonly used as cab protectors. See application chart under the
brochures tab.
$1,016.99
–
$1,047.99
L-Arm Storage Bracket, Pivot, Left
This is a tailboard mounting (Rear Facing)L-arm storage bracket for pivot L -
left side. This fits a 2" x 3" tube.
$100.99
L-Arm Storage Bracket, Pivot, Right
This is a tailboard L-arm storage (Rear Facing)Bracket for pivot R - right
side. This fits a 2" x 3" tube.
$100.99
Buyers Circuit Breakers Hi-Amp
These Hi-Amp Circuit Breakers are ideal for cranes, dump hoists, lift gates,
plows, spreaders, switch panels and power distribution panels. Choose from 50,
80, 100, or 150 Amp Circuit Breakers. These circuit breakers double as a master
disconnect as well. In the event of a "short circuit" the circuit breaker will
"trip" to the off position. Unlike an automatic reset, the manual version stays
open until it is manually reset. By pushing the reset button you can also
disconnect the entire system. This is extremely helpful when servicing the
electrical system.
$31.09
–
$41.29
3M Acrylic Foam Tape
3M Acrylic Foam Tape 4229P is a 0.76mm thick, medium-density, dark grey acrylic foam double sided adhesive tape with high performance acrylic adhesives. Double Sided Acrylic foam adhesive tape is grey with red polyethylene release liner. General purpose double sided adhesive tape with superior adhesive bonding strength for a wide variety of surfaces. Can be used to stick neodymium magnets to non-ferrous material surfaces like plastic, copper, stainless steel, wood, glass, tiles, concrete as these materials does not work directly with magnets. The acrylic foam of 0.76mm thick allows the adhesive to mould to slightly rough surfaces like concrete.
$1.25
FVP Brake Cleaner 13 oz. Can
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
$4.49
Buyers LED Strip Lighting
LED Light Strips are ideal for compartment and cargo work spaces of trucks,
trailers, toolboxes, RV's and more. Space saving low profile design is 1/2"
wide and only 0.2" tall. Self adhesive backing for easy installation on any
surface. Includes clips and screws for alternate mounting. IP68 rated
completely sealed waterproof electronics. 12 volt DC.
$16.89
–
$67.99
Temflex Vinyl Insulating Electrical Tape
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
$2.99
Whelen Towman's Justice Low-Profile Light Bars
Note: Special Handling Fees Apply for Specific Items
The "Justice" Towman's series light bar from Whelen is a high performance, cost competitive 62" Super-LED light bar with a wide range of options. Designed for ease of operation and serviceability. This light bar comes standard with Stop/Turn/Tail lights. Upgrade easily with more LED's, a traffic advisor and work lights.
The "Justice" Towman's series light bar from Whelen is a high performance, cost competitive 62" Super-LED light bar with a wide range of options. Designed for ease of operation and serviceability. This light bar comes standard with Stop/Turn/Tail lights. Upgrade easily with more LED's, a traffic advisor and work lights.
- JFOFAAAA-Updated configuartion Jan 2021-18 Amber LED's w/ 2 Work Lights & S/T/T
- 62"L x 2-1/4"H x 12"D
- Front, rear and all bar operation control
- Optional Scan-LockT flash patterns
- Pattern override feature
- Low power operation
- SAE Class 1
- Includes (3) slide bolt mounting brackets for permanent mount: RMK20S
- Replacement (2) slide bolt mounting brackets option: RMK9S
- Five-Year Warranty
$1,329.99
–
$1,990.99
Parker Spin On Hydraulic Filter Element
This is our #1 selling filter. It is used on older style 411, 412, 601, 602, 611, 612, 552, 4400, 4800, 301, 311, 312, and 614.
$12.57
Miller Steel Wheel Lift L-Arm - Century 3212 and Holmes 600R HD Wreckers
This zinc-plated mild steel L-Arm from Miller Industries fits the wheel lifts
on Century 3212 and Holmes 600R heavy-duty wreckers. Otherwise known as a tire
restraint or wheel retainer, this adjustable L-Arm fits the crosstubes on your
choice of the driver or passenger side. The driver side (12-0803641) part can
be used to replace Part No. (12-0904186). The passenger side (12-0803642) can
be used to replace Part No. (12-0904187).
$328.99
Miller Pivot-Style Wheel Lift L-Arm - Formula 6500 Wheel Lift on Century Wreckers
This pivot-style L-Arm from Miller Industries fits Formula 6500 wheel lifts on
Century wreckers. Also known as a tire restraint or wheel retainer, option of
driver or passenger side L-Arm fits 2 x 3 outer crosstubes (Part Nos.
12-0904158 and 12-0904189). This zinc-plated L-Arm also features an alignment
hole on the underside and includes a ratchet tie-down strap.
$544.99
Miller Pivot-Style Wheel Lift L-Arm - Formula 1 and 6500 Wheel Lifts
Note: Special Handling Fees Apply for Specific Items
This alloy pivot-style L-Arm from Miller Industries fits Formula 1 and Formula 6500 wheel lifts on Century 400 and 600 Series and Challenger 4700 and 4800 Series wreckers. Also known as a tire restraint or wheel retainer, this aluminum L-Arm fits 2" x 3" outer crosstubes and features a scoop style tire pan. The drivers side part can be used to replace Part Nos.: 12-0803648 and 12-0903489 and the passenger side part can be used to replace Part Nos.: 12-0803649 and 12-0903490.
This alloy pivot-style L-Arm from Miller Industries fits Formula 1 and Formula 6500 wheel lifts on Century 400 and 600 Series and Challenger 4700 and 4800 Series wreckers. Also known as a tire restraint or wheel retainer, this aluminum L-Arm fits 2" x 3" outer crosstubes and features a scoop style tire pan. The drivers side part can be used to replace Part Nos.: 12-0803648 and 12-0903489 and the passenger side part can be used to replace Part Nos.: 12-0803649 and 12-0903490.
- Option of driver or passenger position
- Fits 2" x 3" outer crosstubes
- Pivot style receivers
- Alloy construction
- Scoop style tire pan
- 4,000-lb. capacity
- Driver side (12-0904156) replaces Part Nos.: 12-0803648 and 12-0903489
- Passenger side (12-0904157) replaces Part Nos.: 12-0803649 and 12-0903490
Fits: - Century 400 Series
- Century 600 Series
- Challenger 4700 Series
- Challenger 4800 Series
$540.99
Whelen M2 Series Linear Super LED Lightheads
With a unique lens shape and patented Linear-LEDr designed reflector assembly,
M Series lightheads are completely illuminated for unmatched high intensity
warning and low current consumption, your choice of single color lens and
single color LEDs, or clear lens with split color LEDs.
$147.99
–
$208.99
Maxxima 3/4" Stainless Grommet Cover
Stainless Steel Grommet cover for M09300 Clearance Marker Series, by Maxxima.
$1.99
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Phoenix 12 Position Junction Box
Phoenix electrical junction blocks are high-quality, easy-to-use terminal
blocks that allow you to connect multiple electrical sources in your car,
truck, trailer, or RV. They feature a two-piece design and are available with a
range of poles to accommodate a variety of wiring requirements. These blocks
ensure that your wires stay in place and don't contact other leads, keeping all
of your electrical devices organized and safe from short circuiting.
$16.19
RC Industries Black Powder Coated Steel Toolbox w/Stainless Steel Door
RC Industries Heavy Duty Black Powder Coated Steel Toolboxes provide superior security,
convenience, and protection for whatever your storage needs are. RC Toolboxes
are proudly built in the Elkhart, IN for the American Working man. Each box
features our pan formed door with automotive door seal ensuring that your
valuables stay dry regardless of the road conditions. Our anchor compression
latch is the most durable theft deterrent handle in the market, keeping tools
safe.
$594.99
–
$1,576.99
TowMate 22" Wireless Lime Tow Light
This 22" Wireless Tow Light from TowMate is known as the "Lime Light" because
of its lime color. The Lime Light is TowMate's best-selling wireless tow light.
It has 14 LED's that provide stop, turn, and tail signals wirelessly. This
basic unit is not compatible with an I-Mon reminder system. It comes with two
90 lb. pull magnets that have rubber boots, making it easy to mount just about
anywhere. Choose from any transmitter at no additional charge. The transmitter
options include 4-PIN Round (Standard), 4 PIN Flat, 6 PIN Round, 7 PIN Round, 7
PIN RV Style, and a Hardwire Transmitter. If you're looking for style, savings,
and dependability, then this tow light is for you.
$237.50
Related products
Vulcan Front Crosstube 3.5" Stop Pin Assembly
This is a front stop pin assembly for the scoop bracket weldment on Light Duty Vulcan Wreckers by Miller Industries. This stop pin w
ill fit the following models: Vulcan Modular 804, Modular 806, and Modular 880/890. It works for both sides of the wrecker. This par
t can be used to replace Part Numbers: 8621400 and 880411500.
$37.99
Eagle Wheel Lift Attachment Bronze Bushing
This is a bronze bushing for an Eagle Best-Lift Forklift Attachment. This bushing is used where the claws of the forklift attachment mounts to the crossbar. You will need two, one for the driver side claw and one for the passenger side claw. The dimensions of this bushing are 3" long with a 1-1/4" outside diameter and a 1" inside diameter. This part can be used to replace Part Number E300002.
$22.41
Century / Champion / Vulcan / LCG Right Crosstube 3.5"
Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete right hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the left hand version of this Cross Tube,
$417.99
Wheel Lift Crossbar Plate Century 300 Series Holmes 440SL and Vulcan 807
This is a centering crossbar plate for wheel lift on the Vulcan 807, Century
300, and Holmes 440SL Series by Miller Industries.
$139.99
Century / Champion / Vulcan / LCG Left 3.5"
Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete left hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the right hand version of this Cross Tube,
$417.99
Miller L-Arm Claw Pivot Pin Weldment Century Modular Midnight Express and Holmes 220 / 440SL
This is a replacement L-arm claw pivot pin weldment used on the wheel lift of
the Century Modular Midnight Express and the Holmes 220 Snatcher and 440SL
light duty wreckers by Miller Industries. This is the pin that allows the L-arm
to pivot on the crossbar which secures the tire of towed vehicle. To view the
part schematics please click on the Brochure tab above.
$92.99
Miller Pivot-Style Wheel Lift L-Arm - Formula 1 and 6500 Wheel Lifts
Note: Special Handling Fees Apply for Specific Items
This alloy pivot-style L-Arm from Miller Industries fits Formula 1 and Formula 6500 wheel lifts on Century 400 and 600 Series and Challenger 4700 and 4800 Series wreckers. Also known as a tire restraint or wheel retainer, this aluminum L-Arm fits 2" x 3" outer crosstubes and features a scoop style tire pan. The drivers side part can be used to replace Part Nos.: 12-0803648 and 12-0903489 and the passenger side part can be used to replace Part Nos.: 12-0803649 and 12-0903490.
This alloy pivot-style L-Arm from Miller Industries fits Formula 1 and Formula 6500 wheel lifts on Century 400 and 600 Series and Challenger 4700 and 4800 Series wreckers. Also known as a tire restraint or wheel retainer, this aluminum L-Arm fits 2" x 3" outer crosstubes and features a scoop style tire pan. The drivers side part can be used to replace Part Nos.: 12-0803648 and 12-0903489 and the passenger side part can be used to replace Part Nos.: 12-0803649 and 12-0903490.
- Option of driver or passenger position
- Fits 2" x 3" outer crosstubes
- Pivot style receivers
- Alloy construction
- Scoop style tire pan
- 4,000-lb. capacity
- Driver side (12-0904156) replaces Part Nos.: 12-0803648 and 12-0903489
- Passenger side (12-0904157) replaces Part Nos.: 12-0803649 and 12-0903490
Fits: - Century 400 Series
- Century 600 Series
- Challenger 4700 Series
- Challenger 4800 Series
$540.99
Vulcan 800 Series and Carriers - Grid Right 3.5"
Note: Special Handling Fees Apply
This Wheel Grid Assembly from Miller Industries is a right hand assembly that fits 3.5" x 3.5" square tubes. The wheel grid has a Vu lcan patented strapless system that is used on the Crossbar and Outer Crosstube Assembly of Vulcan 804, 806, 870, and 880 wheel lift s, as well as Vulcan Car Carriers. This wheel grid accepts L-Arm 8700180. Click here for the left hand version of this wheel grid 8800800.
This Wheel Grid Assembly from Miller Industries is a right hand assembly that fits 3.5" x 3.5" square tubes. The wheel grid has a Vu lcan patented strapless system that is used on the Crossbar and Outer Crosstube Assembly of Vulcan 804, 806, 870, and 880 wheel lift s, as well as Vulcan Car Carriers. This wheel grid accepts L-Arm 8700180. Click here for the left hand version of this wheel grid 8800800.
$773.99
Miller 2" Wheel Lift L-Arm - Century, Champion, Challenger and Vulcan Carriers
This zinc-plated slide-in L-Arm fits the wheel lifts on various
models of Century, Holmes and Challenger wreckers and Century, Champion,
Challenger and Vulcan car carriers.
$209.99
Miller Wheel Lift L-Arms - Vulcan 10 Series Carriers and 800 Series LD Wheel Lifts
Note: Special Handling Fees Apply for Specific Items
This zinc-plated mild steel L-Arm from Miller Industries fits the Vulcan 10 Series car carriers and 800 Series light-duty wheel lifts with option of driver or passenger side fit. Sometimes called a tire restraint or wheel retainer, the 2 x 2.5 tube is designed to work with the driver side outer crosstube 8800900. This strapless system offers a Working Load Limit of 4,000 lbs. This scoop also features adjustment holes for proper tire fitment and a grated pan for improved grip.
This zinc-plated mild steel L-Arm from Miller Industries fits the Vulcan 10 Series car carriers and 800 Series light-duty wheel lifts with option of driver or passenger side fit. Sometimes called a tire restraint or wheel retainer, the 2 x 2.5 tube is designed to work with the driver side outer crosstube 8800900. This strapless system offers a Working Load Limit of 4,000 lbs. This scoop also features adjustment holes for proper tire fitment and a grated pan for improved grip.
- 2 x 2.5 aluminum tube
- Opton of driver or passenger positioning
- Adjustment holes
- Grated scoop tire pan
- Use with 8800900 outer crosstube
- WLL: 4,000 lbs.
Fits: - 2003-Current Vulcan 10 Series Steel & Aluminum Carriers
- 2001-Current Vulcan 10 Series Extreme Angle Steel Carriers
- 2010-Current Vulcan Modular 804 Wreckers
- 2010-Current Vulcan Modular 806 Wreckers
- 2008-Current Vulcan Modular 880/890 Wreckers
- 2002-Current Vulcan 805 Wreckers
- 2000-Current Vulcan 806 Wreckers
- 1999-Current Vulcan 880/890 Wreckers
$258.99
All-Grip Chevron Style T Handle Pin
This is a Chevron T-handle pin. Choose from three size options: 5/8" X 3" reach, 3/4" X 3-1/2" reach, & 3/4" X 6" reach
$35.99
–
$54.99
B/A Products T Handle Pin 5/8"
This 5/8" diameter Pin comes with a t-handle and release button. It's for
Chevron L-Arm and fits Chevron 408 and Car Carrier wheel grids.
$46.99
Miller Replacement L-Arm Pin Assembly
Replacement pivot lock pin with attachment cable for Century new style "Pivot-L" wheel grids. This part can be used to replace Part Numbers: 12-0714415 and 12-0904140.
$14.89
Miller Steel Wheel Lift L-Arm - Century, Holmes and Vulcan Wreckers
Note: Special Handling Fees Apply for Specific Items
This painted steel L-Arm from Miller Industries fits the wheel lifts on various models of Century, Holmes and Vulcan wreckers. Otherwise known as a tire restraint or wheel retainer, this L-Arm fits the crosstubes on the driver side. This part can be used to replace Driver Side Part Nos. 12-00803911 and 12-0803911 & Passenger Side Part Nos.12-00803912 and 12-0803912.
This painted steel L-Arm from Miller Industries fits the wheel lifts on various models of Century, Holmes and Vulcan wreckers. Otherwise known as a tire restraint or wheel retainer, this L-Arm fits the crosstubes on the driver side. This part can be used to replace Driver Side Part Nos. 12-00803911 and 12-0803911 & Passenger Side Part Nos.12-00803912 and 12-0803912.
- Option of driver or passenger position
- Painted steel
- Driver side (12-0806978) replaces driver side Part Nos. 12-00803911 and
12-0803911
Fits: - 2010 - Current Century Modular Midnight Express
- 2000 - Current Century Midnight Express
- 2007 - Current Century Express 300 Series Modular
- 2009 - Current Holmes 440SL
- 2007 - Current Vulcan Modular 807
- 2000 - Current Vulcan 810 Intruder
$635.99
Miller Rubber Stop Century 300 Series and Vulcan 807 / 810
This Rubber Stop from Miller Industries is used on the boom assembly of Vulcan
810 Intruders, Vulcan 807R and Century 301, 301M, 311 and 312 Wreckers.
$40.99
Miller Eagle Claw Spring Kit
Spring set for Eagle wheel lifts. This part is used to replace Part Number
AWS-1010-A.
$41.99
Vulcan Front Crosstube 3.5" Stop Pin Assembly
This is a front stop pin assembly for the scoop bracket weldment on Light Duty Vulcan Wreckers by Miller Industries. This stop pin w
ill fit the following models: Vulcan Modular 804, Modular 806, and Modular 880/890. It works for both sides of the wrecker. This par
t can be used to replace Part Numbers: 8621400 and 880411500.
$37.99
Eagle Wheel Lift Attachment Bronze Bushing
This is a bronze bushing for an Eagle Best-Lift Forklift Attachment. This bushing is used where the claws of the forklift attachment mounts to the crossbar. You will need two, one for the driver side claw and one for the passenger side claw. The dimensions of this bushing are 3" long with a 1-1/4" outside diameter and a 1" inside diameter. This part can be used to replace Part Number E300002.
$22.41
Century / Champion / Vulcan / LCG Right Crosstube 3.5"
Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete right hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the left hand version of this Cross Tube,
$417.99
Wheel Lift Crossbar Plate Century 300 Series Holmes 440SL and Vulcan 807
This is a centering crossbar plate for wheel lift on the Vulcan 807, Century
300, and Holmes 440SL Series by Miller Industries.
$139.99
Century / Champion / Vulcan / LCG Left 3.5"
Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete left hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the right hand version of this Cross Tube,
$417.99
Miller L-Arm Claw Pivot Pin Weldment Century Modular Midnight Express and Holmes 220 / 440SL
This is a replacement L-arm claw pivot pin weldment used on the wheel lift of
the Century Modular Midnight Express and the Holmes 220 Snatcher and 440SL
light duty wreckers by Miller Industries. This is the pin that allows the L-arm
to pivot on the crossbar which secures the tire of towed vehicle. To view the
part schematics please click on the Brochure tab above.
$92.99
Miller Pivot-Style Wheel Lift L-Arm - Formula 1 and 6500 Wheel Lifts
Note: Special Handling Fees Apply for Specific Items
This alloy pivot-style L-Arm from Miller Industries fits Formula 1 and Formula 6500 wheel lifts on Century 400 and 600 Series and Challenger 4700 and 4800 Series wreckers. Also known as a tire restraint or wheel retainer, this aluminum L-Arm fits 2" x 3" outer crosstubes and features a scoop style tire pan. The drivers side part can be used to replace Part Nos.: 12-0803648 and 12-0903489 and the passenger side part can be used to replace Part Nos.: 12-0803649 and 12-0903490.
This alloy pivot-style L-Arm from Miller Industries fits Formula 1 and Formula 6500 wheel lifts on Century 400 and 600 Series and Challenger 4700 and 4800 Series wreckers. Also known as a tire restraint or wheel retainer, this aluminum L-Arm fits 2" x 3" outer crosstubes and features a scoop style tire pan. The drivers side part can be used to replace Part Nos.: 12-0803648 and 12-0903489 and the passenger side part can be used to replace Part Nos.: 12-0803649 and 12-0903490.
- Option of driver or passenger position
- Fits 2" x 3" outer crosstubes
- Pivot style receivers
- Alloy construction
- Scoop style tire pan
- 4,000-lb. capacity
- Driver side (12-0904156) replaces Part Nos.: 12-0803648 and 12-0903489
- Passenger side (12-0904157) replaces Part Nos.: 12-0803649 and 12-0903490
Fits: - Century 400 Series
- Century 600 Series
- Challenger 4700 Series
- Challenger 4800 Series
$540.99
Vulcan 800 Series and Carriers - Grid Right 3.5"
Note: Special Handling Fees Apply
This Wheel Grid Assembly from Miller Industries is a right hand assembly that fits 3.5" x 3.5" square tubes. The wheel grid has a Vu lcan patented strapless system that is used on the Crossbar and Outer Crosstube Assembly of Vulcan 804, 806, 870, and 880 wheel lift s, as well as Vulcan Car Carriers. This wheel grid accepts L-Arm 8700180. Click here for the left hand version of this wheel grid 8800800.
This Wheel Grid Assembly from Miller Industries is a right hand assembly that fits 3.5" x 3.5" square tubes. The wheel grid has a Vu lcan patented strapless system that is used on the Crossbar and Outer Crosstube Assembly of Vulcan 804, 806, 870, and 880 wheel lift s, as well as Vulcan Car Carriers. This wheel grid accepts L-Arm 8700180. Click here for the left hand version of this wheel grid 8800800.
$773.99
Miller 2" Wheel Lift L-Arm - Century, Champion, Challenger and Vulcan Carriers
This zinc-plated slide-in L-Arm fits the wheel lifts on various
models of Century, Holmes and Challenger wreckers and Century, Champion,
Challenger and Vulcan car carriers.
$209.99
Miller Wheel Lift L-Arms - Vulcan 10 Series Carriers and 800 Series LD Wheel Lifts
Note: Special Handling Fees Apply for Specific Items
This zinc-plated mild steel L-Arm from Miller Industries fits the Vulcan 10 Series car carriers and 800 Series light-duty wheel lifts with option of driver or passenger side fit. Sometimes called a tire restraint or wheel retainer, the 2 x 2.5 tube is designed to work with the driver side outer crosstube 8800900. This strapless system offers a Working Load Limit of 4,000 lbs. This scoop also features adjustment holes for proper tire fitment and a grated pan for improved grip.
This zinc-plated mild steel L-Arm from Miller Industries fits the Vulcan 10 Series car carriers and 800 Series light-duty wheel lifts with option of driver or passenger side fit. Sometimes called a tire restraint or wheel retainer, the 2 x 2.5 tube is designed to work with the driver side outer crosstube 8800900. This strapless system offers a Working Load Limit of 4,000 lbs. This scoop also features adjustment holes for proper tire fitment and a grated pan for improved grip.
- 2 x 2.5 aluminum tube
- Opton of driver or passenger positioning
- Adjustment holes
- Grated scoop tire pan
- Use with 8800900 outer crosstube
- WLL: 4,000 lbs.
Fits: - 2003-Current Vulcan 10 Series Steel & Aluminum Carriers
- 2001-Current Vulcan 10 Series Extreme Angle Steel Carriers
- 2010-Current Vulcan Modular 804 Wreckers
- 2010-Current Vulcan Modular 806 Wreckers
- 2008-Current Vulcan Modular 880/890 Wreckers
- 2002-Current Vulcan 805 Wreckers
- 2000-Current Vulcan 806 Wreckers
- 1999-Current Vulcan 880/890 Wreckers
$258.99
All-Grip Chevron Style T Handle Pin
This is a Chevron T-handle pin. Choose from three size options: 5/8" X 3" reach, 3/4" X 3-1/2" reach, & 3/4" X 6" reach
$35.99
–
$54.99
B/A Products T Handle Pin 5/8"
This 5/8" diameter Pin comes with a t-handle and release button. It's for
Chevron L-Arm and fits Chevron 408 and Car Carrier wheel grids.
$46.99
Miller Replacement L-Arm Pin Assembly
Replacement pivot lock pin with attachment cable for Century new style "Pivot-L" wheel grids. This part can be used to replace Part Numbers: 12-0714415 and 12-0904140.
$14.89
Miller Steel Wheel Lift L-Arm - Century, Holmes and Vulcan Wreckers
Note: Special Handling Fees Apply for Specific Items
This painted steel L-Arm from Miller Industries fits the wheel lifts on various models of Century, Holmes and Vulcan wreckers. Otherwise known as a tire restraint or wheel retainer, this L-Arm fits the crosstubes on the driver side. This part can be used to replace Driver Side Part Nos. 12-00803911 and 12-0803911 & Passenger Side Part Nos.12-00803912 and 12-0803912.
This painted steel L-Arm from Miller Industries fits the wheel lifts on various models of Century, Holmes and Vulcan wreckers. Otherwise known as a tire restraint or wheel retainer, this L-Arm fits the crosstubes on the driver side. This part can be used to replace Driver Side Part Nos. 12-00803911 and 12-0803911 & Passenger Side Part Nos.12-00803912 and 12-0803912.
- Option of driver or passenger position
- Painted steel
- Driver side (12-0806978) replaces driver side Part Nos. 12-00803911 and
12-0803911
Fits: - 2010 - Current Century Modular Midnight Express
- 2000 - Current Century Midnight Express
- 2007 - Current Century Express 300 Series Modular
- 2009 - Current Holmes 440SL
- 2007 - Current Vulcan Modular 807
- 2000 - Current Vulcan 810 Intruder
$635.99
Miller Rubber Stop Century 300 Series and Vulcan 807 / 810
This Rubber Stop from Miller Industries is used on the boom assembly of Vulcan
810 Intruders, Vulcan 807R and Century 301, 301M, 311 and 312 Wreckers.
$40.99
Miller Eagle Claw Spring Kit
Spring set for Eagle wheel lifts. This part is used to replace Part Number
AWS-1010-A.
$41.99
