0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
Miller Boom Extend Cylinder Rear Pin Century 4024
This is a replacement boom extend cylinder rear pin for the Century 4024 heavy
duty integrated wrecker by Miller Industries. This pin goes through the rod end
of the cylinder. This pin attaches the extend cylinder to the main recovery
boom inner weldment. To view the models this pin fits, see Features below. To
view the part schematics, see the Brochure tab.
$45.99
Century Slide Pad Boom Bottom 15" x 3" Wreckers
This Boom Bottom Slide Pad from Miller Industries is 15" long and 3" wide. It
is used on the Boom and Outrigger Assembly of Century and Challenger Wreckers
from Miller Industries. Please see the features below for a list of Wreckers
and see the brochure tab for breakdowns.
$70.99
Century Slide Pad Inner Boom 9" x 2.5" Wreckers
This Inner Boom Slide Pad from Miller Industries is used on the Boom Assembly
of Century and Challenger Wreckers. The Pad is 9" long, 2.5" wide and .5"
thick. Please see the features below for a list of wreckers and see the
brochure tab for breakdowns.
$63.99
Miller Top Spacer, Outer Boom, 6" x 2", Century Wreckers
This 6" long x 2" wide x .25" thick Outer Boom Spacer is used on the Boom
Assembly of Miller Wreckers. These include Century and Challenger Wreckers.
Please see the features below for a list of wreckers and see the brochure tab
for breakdowns.
$55.99
Miller Fold Cylinder Pin Weldment Base End Century / Challenger
This is a replacement base end fold cylinder pin weldment for Century and Challenger heavy duty wreckers by Miller Industries. This is the pin that attaches the base end of the fold cylinder to the underlift tower weldment of the wrecker. This pin fits the Century 1624, 5130/5230, 7035, 9055, the Century CH-32, CH-35, and the CH-45 wreckers. This part can be used to replace Part Number 12-0802220.
$126.99
Miller Bottom Cable Guide
This Bottom Cable Guide from Miller Industries is used on the Boom Assembly of
many Century, Challenger, and Holmes Wreckers. Please see the brochures tab for
a full list of Wreckers and parts schematics.
$21.99
Related products
Miller Boom Extension Cylinder Seal Kit Century / Challenger
This Seal Kit from Miller Industries is used as a replacement seal kit for a
Boom Extension Cylinder. It is commonly used on Century 5025T and Challenger
CH-30T/CH-30T3 Wreckers. Please see the brochure tab for breakdowns.
$93.99
Miller Challenger Underlift Extend Cylinder Seal Kit
This Seal Kit from Miller Industries is used on the Underlift Extend Cylinder
of a Challenger CH-45 Wrecker.
$223.99
Miller Boom Lift Cylinder Pin Base End Century / Challenger
This is a replacement boom lift cylinder pin. This is the pin that goes into
the base end of the cylinder to attach the cylinder to the wrecker's subframe
weldment. This pin fits Century 1624, 3224, 4024, Challenger Ch-16 and Ch-20
Medium Duty Wreckers by Miller Industries. To view specific models this pin
fits see Features below. To view the part schematics, see the Brochure tab.
$126.99
Miller Seal Kit Challenger 6807 T50 Wrecker
This Seal Kit from Miller Industries is used with Underlift Tilt Cylinder
$122.99
Miller Boom Lift Cylinder Century and Challenger HD Wrecker
This is a replacement boom lift cylinder for the Century and Challenger heavy
duty integrated wrecker by Miller Industries. This is the cylinder that raises
and lowers the boom on your wrecker. This cylinder connects to the subframe and
to the outer boom weldment of your wrecker. It is also designed for the right
or left position on the wrecker. To view the models this cylinder fits, See
Features below. To view the part schematics, see the Brochure tab.
$5,091.99
Miller Seal Kit
This Seal Kit from Miller Industries is used on Underlift Extend Hydraulic
Cylinder
$306.99
Miller Boom Extend Cylinder Front Pin Century 3212 and Vulcan V30
This is a replacement boom extend cylinder pin for the Century 3212 and Vulcan
V30 heavy duty integrated wreckers by Miller Industries. This pin is used on
the base end of the cylinder and attaches the boom extend cylinder to the outer
boom weldment. This is the boom extend cylinder pin that is towards the front
of the wrecker. To view the models this wrecker fits, see Features below. To
view the part schematics, see the Brochure tab.
$204.99
Miller Fold Cylinder Pin Weldment Base End Century / Challenger
This is a replacement base end fold cylinder pin weldment for Century and Challenger heavy duty wreckers by Miller Industries. This is the pin that attaches the base end of the fold cylinder to the underlift tower weldment of the wrecker. This pin fits the Century 1624, 5130/5230, 7035, 9055, the Century CH-32, CH-35, and the CH-45 wreckers. This part can be used to replace Part Number 12-0802220.
$126.99
Miller Boom Lift Lower Cylinder Pin Century Wreckers
This is a replacement boom lift cylinder lower pin for the Century 1130/1140,
7035, 9055, and Challenger CH-35 and CH-45 heavy duty wreckers by Miller
Industries. This pin connects the boom lift cylinder to the subframe of the
wrecker. To view the models this pin fits, see Features below. To view the part
schematics, see the Brochure tab.
$276.99
Miller Boom Lift Lower Cylinder Pin Century and Challenger HD Wreckers
This is a replacement boom lift cylinder lower pin on Century and Challenger
Heavy Duty Integrated Wreckers by Miller Industries. This pin goes through the
base end of the cylinder and attaches the lift cylinder to the subframe of the
wrecker. To view the models this pin fits, see Features below. To view the part
schematics, see the Brochure tab.
$185.99
Miller Boom Lift Cylinder Pin Century 3212 HD Wrecker
This is a replacement boom lift cylinder pin for the Century 3212 heavy duty
integrated wrecker by Miller Industries. This pin attaches the lift cylinder to
the main recovery boom outer weldment. To view the part schematics, see the
Brochure tab.
$90.99
Miller Boom Elevation Cylinder Seal Kit Century Wreckers
This Boom Elevation Cylinder from Miller Industries is used on the Hydraulic
Cylinders Assembly of Century 5025 and 5030 Wreckers. It is also used on the
Hydraulic Cylinders Assembly of Challenger CH-30T/CH-30T3 Wreckers. Please see
the features below for a list of wreckers and see the brochure tab for
breakdowns.
$70.99
Miller Boom Fold Cylinder Century Wreckers
This Boom Fold Cylinder from Miller Industries is used on the Underlift
Assembly of Century and Challenger Wreckers. Seal Kit is
$896.99
Miller Boom Lift Cylinder Upper Pivot Pin Century and Challenger HD Wreckers
This is a replacement boom lift cylinder upper pivot pin for the Century 7035,
9055, Challenger CH-35 and CH-45 heavy duty wreckers by Miller Industries. This
pin connects the boom lift cylinder to the outer boom weldment of the wrecker.
To view the models this pin fits, see Features below. To view the part
schematics, see the Brochure tab.
$222.99
Miller Pin Weldment Lower Lift Cylinder
This is a lower lift cylinder pin weldment from Miller Industries.
$103.99
Miller Boom Extension Cylinder Seal Kit Century / Challenger
This Seal Kit from Miller Industries is used as a replacement seal kit for a
Boom Extension Cylinder. It is commonly used on Century 5025T and Challenger
CH-30T/CH-30T3 Wreckers. Please see the brochure tab for breakdowns.
$93.99
Miller Challenger Underlift Extend Cylinder Seal Kit
This Seal Kit from Miller Industries is used on the Underlift Extend Cylinder
of a Challenger CH-45 Wrecker.
$223.99
Miller Boom Lift Cylinder Pin Base End Century / Challenger
This is a replacement boom lift cylinder pin. This is the pin that goes into
the base end of the cylinder to attach the cylinder to the wrecker's subframe
weldment. This pin fits Century 1624, 3224, 4024, Challenger Ch-16 and Ch-20
Medium Duty Wreckers by Miller Industries. To view specific models this pin
fits see Features below. To view the part schematics, see the Brochure tab.
$126.99
Miller Seal Kit Challenger 6807 T50 Wrecker
This Seal Kit from Miller Industries is used with Underlift Tilt Cylinder
$122.99
Miller Boom Lift Cylinder Century and Challenger HD Wrecker
This is a replacement boom lift cylinder for the Century and Challenger heavy
duty integrated wrecker by Miller Industries. This is the cylinder that raises
and lowers the boom on your wrecker. This cylinder connects to the subframe and
to the outer boom weldment of your wrecker. It is also designed for the right
or left position on the wrecker. To view the models this cylinder fits, See
Features below. To view the part schematics, see the Brochure tab.
$5,091.99
Miller Seal Kit
This Seal Kit from Miller Industries is used on Underlift Extend Hydraulic
Cylinder
$306.99
Miller Boom Extend Cylinder Front Pin Century 3212 and Vulcan V30
This is a replacement boom extend cylinder pin for the Century 3212 and Vulcan
V30 heavy duty integrated wreckers by Miller Industries. This pin is used on
the base end of the cylinder and attaches the boom extend cylinder to the outer
boom weldment. This is the boom extend cylinder pin that is towards the front
of the wrecker. To view the models this wrecker fits, see Features below. To
view the part schematics, see the Brochure tab.
$204.99
Miller Fold Cylinder Pin Weldment Base End Century / Challenger
This is a replacement base end fold cylinder pin weldment for Century and Challenger heavy duty wreckers by Miller Industries. This is the pin that attaches the base end of the fold cylinder to the underlift tower weldment of the wrecker. This pin fits the Century 1624, 5130/5230, 7035, 9055, the Century CH-32, CH-35, and the CH-45 wreckers. This part can be used to replace Part Number 12-0802220.
$126.99
Miller Boom Lift Lower Cylinder Pin Century Wreckers
This is a replacement boom lift cylinder lower pin for the Century 1130/1140,
7035, 9055, and Challenger CH-35 and CH-45 heavy duty wreckers by Miller
Industries. This pin connects the boom lift cylinder to the subframe of the
wrecker. To view the models this pin fits, see Features below. To view the part
schematics, see the Brochure tab.
$276.99
Miller Boom Lift Lower Cylinder Pin Century and Challenger HD Wreckers
This is a replacement boom lift cylinder lower pin on Century and Challenger
Heavy Duty Integrated Wreckers by Miller Industries. This pin goes through the
base end of the cylinder and attaches the lift cylinder to the subframe of the
wrecker. To view the models this pin fits, see Features below. To view the part
schematics, see the Brochure tab.
$185.99
Miller Boom Lift Cylinder Pin Century 3212 HD Wrecker
This is a replacement boom lift cylinder pin for the Century 3212 heavy duty
integrated wrecker by Miller Industries. This pin attaches the lift cylinder to
the main recovery boom outer weldment. To view the part schematics, see the
Brochure tab.
$90.99
Miller Boom Elevation Cylinder Seal Kit Century Wreckers
This Boom Elevation Cylinder from Miller Industries is used on the Hydraulic
Cylinders Assembly of Century 5025 and 5030 Wreckers. It is also used on the
Hydraulic Cylinders Assembly of Challenger CH-30T/CH-30T3 Wreckers. Please see
the features below for a list of wreckers and see the brochure tab for
breakdowns.
$70.99
Miller Boom Fold Cylinder Century Wreckers
This Boom Fold Cylinder from Miller Industries is used on the Underlift
Assembly of Century and Challenger Wreckers. Seal Kit is
$896.99
Miller Boom Lift Cylinder Upper Pivot Pin Century and Challenger HD Wreckers
This is a replacement boom lift cylinder upper pivot pin for the Century 7035,
9055, Challenger CH-35 and CH-45 heavy duty wreckers by Miller Industries. This
pin connects the boom lift cylinder to the outer boom weldment of the wrecker.
To view the models this pin fits, see Features below. To view the part
schematics, see the Brochure tab.
$222.99
Miller Pin Weldment Lower Lift Cylinder
This is a lower lift cylinder pin weldment from Miller Industries.
$103.99
