Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
These Hi-Amp Circuit Breakers are ideal for cranes, dump hoists, lift gates,
plows, spreaders, switch panels and power distribution panels. Choose from 50,
80, 100, or 150 Amp Circuit Breakers. These circuit breakers double as a master
disconnect as well. In the event of a "short circuit" the circuit breaker will
"trip" to the off position. Unlike an automatic reset, the manual version stays
open until it is manually reset. By pushing the reset button you can also
disconnect the entire system. This is extremely helpful when servicing the
electrical system.
3M Acrylic Foam Tape 4229P is a 0.76mm thick, medium-density, dark grey acrylic foam double sided adhesive tape with high performance acrylic adhesives. Double Sided Acrylic foam adhesive tape is grey with red polyethylene release liner. General purpose double sided adhesive tape with superior adhesive bonding strength for a wide variety of surfaces. Can be used to stick neodymium magnets to non-ferrous material surfaces like plastic, copper, stainless steel, wood, glass, tiles, concrete as these materials does not work directly with magnets. The acrylic foam of 0.76mm thick allows the adhesive to mould to slightly rough surfaces like concrete.
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
Howes Lubricator heavy-duty, multi-purpose Lubricator and Penetrating Oil is guaranteed to loosen rusted nuts and bolts. The lubricant can be sprayed on wires, leads and distributor caps and is safe to use on almost any surface.
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
Phoenix electrical junction blocks are high-quality, easy-to-use terminal
blocks that allow you to connect multiple electrical sources in your car,
truck, trailer, or RV. They feature a two-piece design and are available with a
range of poles to accommodate a variety of wiring requirements. These blocks
ensure that your wires stay in place and don't contact other leads, keeping all
of your electrical devices organized and safe from short circuiting.
This 36" Wireless Tow Light from TowMate provides stop, tail, and turn with
side marker lights and three DOT center lights. This system comes with your
choice of transmitter, charge plug, and instructions. Choose from any transmitter at no
additional charge. The transmitter options include 4-PIN Round, 4 PIN Flat, 6
PIN Round, 7 PIN Round (Standard), 7 PIN RV Style, and a Hardwire Transmitter.
Tork Advanced ShopMax Wiper 450 Center-feed shop towels are highly absorbent, offering excellent wipe-dry capabilities. Their strong construction offers durability and the self-dispensing pop-up box offers controlled dispensing. They contain 85% paper content (60% recycled, 40% postindustrial) and 15% synthetic emulsion. Sold in a box of 200.
This spring secures winch cable hook on large wreckers. This spring is used on
Vulcans and late model Century units as a cable tie-back. This spring links to
the hook with a pear link #9048800. Uses a 12-0804054 cable tie-back mounting
tube. Compatible with 2004 Units and Newer.
Premium quality primary wire cable manufactured to meet or exceed ATA
specifications. Color coded PVC cover resists weather and protects the
individual color coded, annealed copper conductor strands. Commonly used to
install or repair marker/ID light circuits.
This welded link is commonly used in conjunction with the cable tie-back
springs on Miller Century, Vulcan and Challenger Heavy Duty Wreckers
See part numbers:
This boom support cable is a strong cable. Capable of handling up to 3,800 pounds, the All-Grip Boom Support Cable 7/16" x 43' has an EIP fiber core wire rope. This makes it extra durable.
There are wreckers and older equipment that still require the use of Boom
Support lines. These cables from All-Grip are the same as factory
replacements. Constructed of 6 x 19 Eip Fibercore wire rope with a flemished
thimbled eye at one end while the other end is plain.
There are wreckers and older equipment that still require the use of Boom
Support lines. These cables from All-Grip are the same as factory
replacements. Constructed of 6 x 19 Eip Fibercore wire rope with a flemished
thimbled eye at one end while the other end is plain.
There are wreckers and older equipment that still require the use of Boom
Support lines. These cables from All-Grip are the same as factory
replacements. Constructed of 6 x 19 Eip Fibercore wire rope with a flemished
thimbled eye at one end while the other end is plain. This part can be used to
replace Part Number CF-181.
This spring secures winch cable hook on large wreckers. This spring is used on
Vulcans and late model Century units as a cable tie-back. This spring links to
the hook with a pear link #9048800. Uses a 12-0804054 cable tie-back mounting
tube. Compatible with 2004 Units and Newer.
This replacement control cable from Miller Industries is for Century and Vulcan Light Duty Wreckers. This is a marine grade cable th
at measures 84" long and has a 1" stroke. This cable replaces part numbers:
12-0311724 and 518-1007200.
This Miller Industries Winch Cable Tie-Back Spring secures your winch cable
hook on heavy wreckers.
This spring is used on Century units up to 2004. The spring links to the cable
hook using an oblong master link #9048800. It measures 13" long and has a
diameter of 1-3/4".
Replacement control cable for Century 400/600 Modular series and Vulcan 880/890 Modular series wreckers. 65" long with a 1" stroke. This part can be used to replace Part Number 12-0311723.
This Universal Spring Tube Mount Cable Tie-Back from In The Ditch is a great way to attach the hook on a winch line when not in use
. Each universal
spring tube comes with a bolt on mounting tab and one weld on mounting tab. It?s your choice to weld the tab on or bolt it on. With
different mounting options this is a truly universal mount that will fit hundreds of applications. Stop using bungee cords to keep
your winch lines tight and buy a set of these universal spring tubes.
This is a dual control cable clevis for light duty wreckers by Miller
Industries. See Features for related wreckers and Brochures for reference
charts.
This is a replacement 72" control cable for a Holmes wrecker from Protech. This
cable will work for the "Boom" or "Winch" functions. The cable has a 2" stroke
and works with Holmes wreckers with modular controls.
This boom support cable is a strong cable. Capable of handling up to 3,800 pounds, the All-Grip Boom Support Cable 7/16" x 43' has an EIP fiber core wire rope. This makes it extra durable.
There are wreckers and older equipment that still require the use of Boom
Support lines. These cables from All-Grip are the same as factory
replacements. Constructed of 6 x 19 Eip Fibercore wire rope with a flemished
thimbled eye at one end while the other end is plain.
There are wreckers and older equipment that still require the use of Boom
Support lines. These cables from All-Grip are the same as factory
replacements. Constructed of 6 x 19 Eip Fibercore wire rope with a flemished
thimbled eye at one end while the other end is plain.
There are wreckers and older equipment that still require the use of Boom
Support lines. These cables from All-Grip are the same as factory
replacements. Constructed of 6 x 19 Eip Fibercore wire rope with a flemished
thimbled eye at one end while the other end is plain. This part can be used to
replace Part Number CF-181.
This spring secures winch cable hook on large wreckers. This spring is used on
Vulcans and late model Century units as a cable tie-back. This spring links to
the hook with a pear link #9048800. Uses a 12-0804054 cable tie-back mounting
tube. Compatible with 2004 Units and Newer.
This replacement control cable from Miller Industries is for Century and Vulcan Light Duty Wreckers. This is a marine grade cable th
at measures 84" long and has a 1" stroke. This cable replaces part numbers:
12-0311724 and 518-1007200.
This Miller Industries Winch Cable Tie-Back Spring secures your winch cable
hook on heavy wreckers.
This spring is used on Century units up to 2004. The spring links to the cable
hook using an oblong master link #9048800. It measures 13" long and has a
diameter of 1-3/4".
Replacement control cable for Century 400/600 Modular series and Vulcan 880/890 Modular series wreckers. 65" long with a 1" stroke. This part can be used to replace Part Number 12-0311723.
This Universal Spring Tube Mount Cable Tie-Back from In The Ditch is a great way to attach the hook on a winch line when not in use
. Each universal
spring tube comes with a bolt on mounting tab and one weld on mounting tab. It?s your choice to weld the tab on or bolt it on. With
different mounting options this is a truly universal mount that will fit hundreds of applications. Stop using bungee cords to keep
your winch lines tight and buy a set of these universal spring tubes.
This is a dual control cable clevis for light duty wreckers by Miller
Industries. See Features for related wreckers and Brochures for reference
charts.
This is a replacement 72" control cable for a Holmes wrecker from Protech. This
cable will work for the "Boom" or "Winch" functions. The cable has a 2" stroke
and works with Holmes wreckers with modular controls.