Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
This is a Miller Industries Control Box hood for the driver side of any
Century/Vulcan Car Carrier 2005 & newer (Excluding LCG). It houses a 5-spool
system and is a galvanized finish.
This is a Miller Industries Control Box hood for the Passenger side of any
Century/Vulcan Car Carrier 2005 & newer (Excluding LCG). It houses a 5-spool
system and is galvanized finish.
This is a replacement 5 handle control assembly with control rods for a Century 21' steel rollback car carrier by Miller Industries. This assembly includes 2 pairs of control handle assemblies and knobs as shown in the photo. You also get 5 control rods that link the control handles to the valve (Not Pictured).
Phoenix electrical junction blocks are high-quality, easy-to-use terminal
blocks that allow you to connect multiple electrical sources in your car,
truck, trailer, or RV. They feature a two-piece design and are available with a
range of poles to accommodate a variety of wiring requirements. These blocks
ensure that your wires stay in place and don't contact other leads, keeping all
of your electrical devices organized and safe from short circuiting.
This is a Miller Industries Decal Plate for the passenger side control box
hood. It is designed for all Century/Vulcan Car Carriers prior to 2005
(Excluding LCG). It labels all the levers of a 5-spool system.
This is a Miller Industries Decal Plate for the driver side control box hood.
It is designed for all Century/Vulcan Car Carriers (Excluding LCG). It labels
all the levers of a 5-spool system.
This Right Hand Mud Flap Mounting Bracket from Miller Industries is used on the assembly of several Miller Car Carriers. These include Century, Champion, and Vulcan Carriers. Please see the features below for a list of carriers, and see the brochure tab for breakdowns. This part can be used to replace Part Number 12-0704950.
This Control Rod End Link from Miller Industries is used on the Control and
Crossrod Assembly. It is commonly used on control rods of Century 19' Carriers.
This control rod is used with Century 15 Series 2 and 3 Car Carriers, Champion
Aluminum and Steel Car Carriers and Vulcan 10 Series Aluminum and Steel Car
Carriers.
This Mud Flap Bracket from Miller Industries is used on the Control Station Components Assembly of Century LCG 12 and 16 Series Car Carriers. Please see the brochure tab for breakdowns. This part can be used to replace Part Number 12-0704771.
Prevent mounting bolts, nuts and washers from pulling through the backside of
your rubber or plastic mudflaps with this flat support bar from Zip's AW
Direct. At nearly two feet wide, the aluminum stock works in tandem with your
truck's mudflap bracket. Comes with four mounting holes pre-drilled.
This Left Hand Mud Flap Mounting Bracket from Miller Industries is used on the
assembly of several Miller Car Carriers. These include Century, Champion, and
Vulcan Carriers. Please see the features below for a list of carriers, and see
the brochure tab for breakdowns.
This is a Miller Industries Control Box hood for the passenger side of any
Century/Vulcan Car Carrier prior to 2005 (Excluding LCG). It houses a 5-spool
system and is a steel finish.
This is a Miller Industriels Long Control Handle for a Car Carrier. It the center handle on a 5 spool system. This part can be used to replace Part Number 12-0801566.
This Control Rod End Link from Miller Industries is used on the Control and
Crossrod Assembly. It is commonly used on control rods of Century 19' Carriers.
This control rod is used with Century 15 Series 2 and 3 Car Carriers, Champion
Aluminum and Steel Car Carriers and Vulcan 10 Series Aluminum and Steel Car
Carriers.
This is a Miller Industries Decal Plate for the driver side control box hood.
It is designed for all Century/Vulcan Car Carriers (Excluding LCG). It labels
all the levers of a 5-spool system.
This is a Miller Industries Decal Plate for the passenger side control box
hood. It is designed for all Century/Vulcan Car Carriers prior to 2005
(Excluding LCG). It labels all the levers of a 5-spool system.
This is a Miller Industries Control Box hood for the driver side of any
Century/Vulcan Car Carrier prior to 2005 (Excluding LCG). It houses a 5-spool
system and is a steel finish.
This is a Miller Industries Control Box hood for the passenger side of any
Century/Vulcan Car Carrier prior to 2005 (Excluding LCG). It houses a 5-spool
system and is a steel finish.
This is a Miller Industriels Long Control Handle for a Car Carrier. It the center handle on a 5 spool system. This part can be used to replace Part Number 12-0801566.
This Control Rod End Link from Miller Industries is used on the Control and
Crossrod Assembly. It is commonly used on control rods of Century 19' Carriers.
This control rod is used with Century 15 Series 2 and 3 Car Carriers, Champion
Aluminum and Steel Car Carriers and Vulcan 10 Series Aluminum and Steel Car
Carriers.
This is a Miller Industries Decal Plate for the driver side control box hood.
It is designed for all Century/Vulcan Car Carriers (Excluding LCG). It labels
all the levers of a 5-spool system.
This is a Miller Industries Decal Plate for the passenger side control box
hood. It is designed for all Century/Vulcan Car Carriers prior to 2005
(Excluding LCG). It labels all the levers of a 5-spool system.
This is a Miller Industries Control Box hood for the driver side of any
Century/Vulcan Car Carrier prior to 2005 (Excluding LCG). It houses a 5-spool
system and is a steel finish.