Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
3M Acrylic Foam Tape 4229P is a 0.76mm thick, medium-density, dark grey acrylic foam double sided adhesive tape with high performance acrylic adhesives. Double Sided Acrylic foam adhesive tape is grey with red polyethylene release liner. General purpose double sided adhesive tape with superior adhesive bonding strength for a wide variety of surfaces. Can be used to stick neodymium magnets to non-ferrous material surfaces like plastic, copper, stainless steel, wood, glass, tiles, concrete as these materials does not work directly with magnets. The acrylic foam of 0.76mm thick allows the adhesive to mould to slightly rough surfaces like concrete.
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
LED Light Strips are ideal for compartment and cargo work spaces of trucks,
trailers, toolboxes, RV's and more. Space saving low profile design is 1/2"
wide and only 0.2" tall. Self adhesive backing for easy installation on any
surface. Includes clips and screws for alternate mounting. IP68 rated
completely sealed waterproof electronics. 12 volt DC.
This is a universal Under Cover Red/Amber LED hide away light from SoundOff
Signal with a chrome bezel. It is surface mounted with extreme angle lens and
an in line flasher.
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
Howes Lubricator heavy-duty, multi-purpose Lubricator and Penetrating Oil is guaranteed to loosen rusted nuts and bolts. The lubricant can be sprayed on wires, leads and distributor caps and is safe to use on almost any surface.
Get your truck organized with this Frame Fork Storage Rack. This frame fork storage rack will easily mount in most tool boxes. The 23" rack can hold 6 regular forks and the 30" can hold 4 regular forks and 2 spring lift adapters. It fits most side box compartments. In a matter of minutes you can bolt the mount in place and keep all your forks in one place. This rack is made from 1/8" thick aluminum that will last forever and doesn't need to be painted.
Our popular SL-9 magnetic tow light kit comes with two sealed beam truck lights
in a rubber housing, plastic-housed magnets, and 30' of 4 - wire cable all
pre-wired into the male plug. The kit also includes a plastic carrying case
and the female plug. The flexible cable is 16 gauge wire with "Yukon Weather
Proven" outer and inner jackets.
Option of amber or clear bulb.The Neutral White, High Intensity 12V, 180 Degree
Illumination Landscape, Park Light, Number, License Plate Light, Trunk Light,
Instrument/Gauge Light, Side Light 35 x Longer Life Time Compared with
Traditional Incandescent Bulbs. Plus Less Heat Output and Extremely Low Power
Consumption.
This 22" Wireless Tow Light from TowMate is known as the "Lime Light" because
of its lime color. The Lime Light is TowMate's best-selling wireless tow light.
It has 14 LED's that provide stop, turn, and tail signals wirelessly. This
basic unit is not compatible with an I-Mon reminder system. It comes with two
90 lb. pull magnets that have rubber boots, making it easy to mount just about
anywhere. Choose from any transmitter at no additional charge. The transmitter
options include 4-PIN Round (Standard), 4 PIN Flat, 6 PIN Round, 7 PIN Round, 7
PIN RV Style, and a Hardwire Transmitter. If you're looking for style, savings,
and dependability, then this tow light is for you.
This replacement control cable from Miller Industries is for Century and Vulcan Light Duty Wreckers. This is a marine grade cable th
at measures 84" long and has a 1" stroke. This cable replaces part numbers:
12-0311724 and 518-1007200.
Tork Advanced ShopMax Wiper 450 Center-feed shop towels are highly absorbent, offering excellent wipe-dry capabilities. Their strong construction offers durability and the self-dispensing pop-up box offers controlled dispensing. They contain 85% paper content (60% recycled, 40% postindustrial) and 15% synthetic emulsion. Sold in a box of 200.
Replacement control cable for Century 400/600 Modular series and Vulcan 880/890 Modular series wreckers. 65" long with a 1" stroke. This part can be used to replace Part Number 12-0311723.
Plug socket contacts complete the electrical connection of the AT Series plug
housing assembly. There are three different quality grades of contacts
available. All feature a copper alloy base with a standard stamped/formed
nickel plate, military solid crimp nickel, or gold-plate.
This is a nylatron wear pad by Miller Industries. It measures 6" x 1-1/2" x
3/8". It will fit the following wreckers: Century Modular Express 300 Series,
Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes 440SL,
600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder, Modular
880/890, and 896/897. See Features for related parts and Brochures for
reference charts.
This boom support cable is a strong cable. Capable of handling up to 3,800 pounds, the All-Grip Boom Support Cable 7/16" x 43' has an EIP fiber core wire rope. This makes it extra durable.
There are wreckers and older equipment that still require the use of Boom
Support lines. These cables from All-Grip are the same as factory
replacements. Constructed of 6 x 19 Eip Fibercore wire rope with a flemished
thimbled eye at one end while the other end is plain.
There are wreckers and older equipment that still require the use of Boom
Support lines. These cables from All-Grip are the same as factory
replacements. Constructed of 6 x 19 Eip Fibercore wire rope with a flemished
thimbled eye at one end while the other end is plain.
There are wreckers and older equipment that still require the use of Boom
Support lines. These cables from All-Grip are the same as factory
replacements. Constructed of 6 x 19 Eip Fibercore wire rope with a flemished
thimbled eye at one end while the other end is plain. This part can be used to
replace Part Number CF-181.
This spring secures winch cable hook on large wreckers. This spring is used on
Vulcans and late model Century units as a cable tie-back. This spring links to
the hook with a pear link #9048800. Uses a 12-0804054 cable tie-back mounting
tube. Compatible with 2004 Units and Newer.
This replacement control cable from Miller Industries is for Century and Vulcan Light Duty Wreckers. This is a marine grade cable th
at measures 84" long and has a 1" stroke. This cable replaces part numbers:
12-0311724 and 518-1007200.
This Miller Industries Winch Cable Tie-Back Spring secures your winch cable
hook on heavy wreckers.
This spring is used on Century units up to 2004. The spring links to the cable
hook using an oblong master link #9048800. It measures 13" long and has a
diameter of 1-3/4".
Replacement control cable for Century 400/600 Modular series and Vulcan 880/890 Modular series wreckers. 65" long with a 1" stroke. This part can be used to replace Part Number 12-0311723.
This Universal Spring Tube Mount Cable Tie-Back from In The Ditch is a great way to attach the hook on a winch line when not in use
. Each universal
spring tube comes with a bolt on mounting tab and one weld on mounting tab. It?s your choice to weld the tab on or bolt it on. With
different mounting options this is a truly universal mount that will fit hundreds of applications. Stop using bungee cords to keep
your winch lines tight and buy a set of these universal spring tubes.
This is a replacement 72" control cable for a Holmes wrecker from Protech. This
cable will work for the "Boom" or "Winch" functions. The cable has a 2" stroke
and works with Holmes wreckers with modular controls.
This boom support cable is a strong cable. Capable of handling up to 3,800 pounds, the All-Grip Boom Support Cable 7/16" x 43' has an EIP fiber core wire rope. This makes it extra durable.
There are wreckers and older equipment that still require the use of Boom
Support lines. These cables from All-Grip are the same as factory
replacements. Constructed of 6 x 19 Eip Fibercore wire rope with a flemished
thimbled eye at one end while the other end is plain.
There are wreckers and older equipment that still require the use of Boom
Support lines. These cables from All-Grip are the same as factory
replacements. Constructed of 6 x 19 Eip Fibercore wire rope with a flemished
thimbled eye at one end while the other end is plain.
There are wreckers and older equipment that still require the use of Boom
Support lines. These cables from All-Grip are the same as factory
replacements. Constructed of 6 x 19 Eip Fibercore wire rope with a flemished
thimbled eye at one end while the other end is plain. This part can be used to
replace Part Number CF-181.
This spring secures winch cable hook on large wreckers. This spring is used on
Vulcans and late model Century units as a cable tie-back. This spring links to
the hook with a pear link #9048800. Uses a 12-0804054 cable tie-back mounting
tube. Compatible with 2004 Units and Newer.
This replacement control cable from Miller Industries is for Century and Vulcan Light Duty Wreckers. This is a marine grade cable th
at measures 84" long and has a 1" stroke. This cable replaces part numbers:
12-0311724 and 518-1007200.
This Miller Industries Winch Cable Tie-Back Spring secures your winch cable
hook on heavy wreckers.
This spring is used on Century units up to 2004. The spring links to the cable
hook using an oblong master link #9048800. It measures 13" long and has a
diameter of 1-3/4".
Replacement control cable for Century 400/600 Modular series and Vulcan 880/890 Modular series wreckers. 65" long with a 1" stroke. This part can be used to replace Part Number 12-0311723.
This Universal Spring Tube Mount Cable Tie-Back from In The Ditch is a great way to attach the hook on a winch line when not in use
. Each universal
spring tube comes with a bolt on mounting tab and one weld on mounting tab. It?s your choice to weld the tab on or bolt it on. With
different mounting options this is a truly universal mount that will fit hundreds of applications. Stop using bungee cords to keep
your winch lines tight and buy a set of these universal spring tubes.
This is a replacement 72" control cable for a Holmes wrecker from Protech. This
cable will work for the "Boom" or "Winch" functions. The cable has a 2" stroke
and works with Holmes wreckers with modular controls.