0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
Hella Side LED Marker Light
These LED Side Marker Lights from Hella are available in either amber or red.
They are commonly used on Modular Wreckers from Century and Vulcan. See the
features below for a list of wreckers and see the brochure tab for breakdowns.
$55.99
FVP Brake Cleaner 13 oz. Can
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
$4.49
Miller Wheel Lift L-Arms - Vulcan 10 Series Carriers and 800 Series LD Wheel Lifts
Note: Special Handling Fees Apply for Specific Items
This zinc-plated mild steel L-Arm from Miller Industries fits the Vulcan 10 Series car carriers and 800 Series light-duty wheel lifts with option of driver or passenger side fit. Sometimes called a tire restraint or wheel retainer, the 2 x 2.5 tube is designed to work with the driver side outer crosstube 8800900. This strapless system offers a Working Load Limit of 4,000 lbs. This scoop also features adjustment holes for proper tire fitment and a grated pan for improved grip.
This zinc-plated mild steel L-Arm from Miller Industries fits the Vulcan 10 Series car carriers and 800 Series light-duty wheel lifts with option of driver or passenger side fit. Sometimes called a tire restraint or wheel retainer, the 2 x 2.5 tube is designed to work with the driver side outer crosstube 8800900. This strapless system offers a Working Load Limit of 4,000 lbs. This scoop also features adjustment holes for proper tire fitment and a grated pan for improved grip.
- 2 x 2.5 aluminum tube
- Opton of driver or passenger positioning
- Adjustment holes
- Grated scoop tire pan
- Use with 8800900 outer crosstube
- WLL: 4,000 lbs.
Fits: - 2003-Current Vulcan 10 Series Steel & Aluminum Carriers
- 2001-Current Vulcan 10 Series Extreme Angle Steel Carriers
- 2010-Current Vulcan Modular 804 Wreckers
- 2010-Current Vulcan Modular 806 Wreckers
- 2008-Current Vulcan Modular 880/890 Wreckers
- 2002-Current Vulcan 805 Wreckers
- 2000-Current Vulcan 806 Wreckers
- 1999-Current Vulcan 880/890 Wreckers
$258.99
Zips Pivot Pin Kit Vulcan / Century 01 - 05
This Pivot Pin Kit is for use with Vulcan 804, 831, 860, 870 and 880 Wrecker
Wheel Lifts. This kit also fits all Vulcan Car Carrier Wheel Lifts and
Century/Champion 10 Series Car Carrier Wheel Lifts built in 2002 or newer with
a Vulcan style crossbar. This Kit has a 1-1/4" diameter pivot pin that is held
in place with an allen head bolt and washer on the top.
$53.99
Zips Wheel Lift Wear Pad Kit Vulcan 880 / 890
Wear Pad Kit, Vulcan 880 & 890 wheel lifts. Upper and Lower wear pads. Kit
includes (1)
$79.99
Zips Vulcan Crossbar Pivot Pin Kit 890 and 850 Wreckers
Pivot Pin Kit for Vulcan 850 and 890 wheel lifts.
$53.99
Zips Detent Kit Century / Vulcan
This Detent Kit from Zip's will help to keep the crossbar straight. It fits
Vulcan style crossbars, Vulcan Car Carrier Wheel Lifts, and Century Car Carrier
Wheel Lifts with Vulcan crossbars. The kit includes a ball, spring, washers,
and a threaded plug.
$33.99
Miller Wheel Lift Tilt Cylinder Upper Pin Century Vulcan
This is the Wheel Lift Tilt Cylinder Upper Pin on the Wheel Lift of a Century
Modular 400 & 600 Series, Vulcan 880/890, Vulcan Modular 880/890 and the Vulcan
896/897 Series light duty wreckers by Miller Industries. This pin connects the
wheel lift's tilt cylinder to the wheel lift frame weldment. To view which
wrecker models this pin fits please see Features below. To view part schematics
click on the Brochure tab.
$68.99
Miller Wheel Lift Tilt Cylinder Vulcan 880 / 890 Series
This is the Wheel Lift Tilt Cylinder for the Vulcan 880 / 890 Series light duty
wreckers by Miller Industries. This cylinder allows your wheel lift to tilt up
and down. This cylinder connects to the wheel lift tilt column and the subframe
of the wrecker. To view the part schematic click on the Brochure tab.
$1,969.99
Tilt Column Pivot Pin, 880/890
This Tilt Column Pivot Pin is for an 880/890 Series Vulcan Underlift Assembly.
$204.99
Miller Upper Wheel Lift Cylinder Pin Vulcan 880 / 890 Series
This is the Upper Lift Cylinder Pin on the Wheel Lift of the Vulcan 880 / 890
Series and the Modular 880 / 890 Series light duty wreckers by Miller
Industries. This is the upper pin and it goes through the base end of the
cylinder. This cylinder connects the lift cylinder to the wheel lift tilt
column weldment. To see which specific wrecker models this pin will fit please
see Features below. To view the part schematics click on the Brochure tab.
$39.99
Miller Rear Wheel Lift Extend Cylinder Pin Vulcan 800 Series
This is the Wheel Lift Extend Cylinder Rear Pin for the Vulcan 800 Series light
duty wreckers by Miller Industries. This includes the 880 / 890 Series, Modular
880 / 890 Series and the 896 / 897 Series. This pin is used to connect the
wheel lift extend cylinder to the wheel lift inner boom weldment. To see which
specific wrecker models this pin fits please see Features below. To view the
part schematics click on the Brochure tab.
$62.99
Vulcan External Retaining Ring, 1-1/4"
1-1/4" External retaining ring that is used with the extend cylinder pin
(
$3.59
Tork Advanced ShopMax Centerfeed Shop Towels
Tork Advanced ShopMax Wiper 450 Center-feed shop towels are highly absorbent, offering excellent wipe-dry capabilities. Their strong construction offers durability and the self-dispensing pop-up box offers controlled dispensing. They contain 85% paper content (60% recycled, 40% postindustrial) and 15% synthetic emulsion. Sold in a box of 200.
$21.99
Miller Wheel Lift Lower Tilt Wear Pad Holmes 600R Vulcan 880 / 890 and 896 / 897
This is a wheel lift wear pad for the lower tilt column on Holmes and Vulcan
Wreckers. This wear pad will fit on the following wrecker models: Holmes 600R,
Vulcan 880/890, Modular 880/890, 896/897. See Brochures for reference charts.
$15.79
Miller Lower Wheel Lift Cylinder Pin Vulcan 880 / 890 Series
This is the Lower Lift Cylinder Pin on the Wheel Lift of the Vulcan 880 / 890
Series and the Modular 880 / 890 Series light duty wreckers by Miller
Industries. This is the lower pin and it goes through the rod end of the
cylinder. This cylinder connects the lift cylinder to the wheel lift outer boom
weldment. To see which specific wrecker models this pin will fit please see
Features below. To view the part schematics click on the Brochure tab.
$77.99
Miller Wear Pad Wheel Lift Outer Stinger Vulcan 800 Series
This is a wheel lift wear pad for the inside, bottom of the outer stinger on
Vulcan 800 Series Wreckers by Miller Industries. This wear pad will fit on the
following models: Vulcan Modular 880/890, 880/890, 806, 896/897. See Features
for related parts and Brochures for reference charts. This part can be used to
replace Part Number, 9100112.
$21.19
Miller Snap Ring 1" External Vulcan Modular 880 / 890
This is a 1" Snap Ring by Miller Industries. This snap ring is used on the
wheel lift extend cylinder pin. This snap ring secures the pin in place. To
view the part schematic click on the Brochure tab.
$1.79
Vulcan Wear Pad Outer Stinger 880 / 890 / 805 / 896 / 897
This is a wheel lift wear pad bar for the outer stinger on light duty Vulcan
wreckers by Miller Industries. There are 2 wear pads per wheel lift and they
are located on the upper, outside portion of the stinger. The Vulcan models
this wear pad will fit are: Vulcan Modular 880/890, 880/890, 805, 896/897. See
Brochures for reference charts.
$12.84
Related products
Miller Wheel-Lift Lift Cylinder Seal Kit Century Challenger Champio Holmes Vulcan
This seal kit is designed to withstand the temperatures and pressures of
hydraulic cylinders and can help operators get the maximum productivity out of
their machine. Resealing cylinders is one way to help lower operating costs and
improve the performance of your machines hydraulic system. This cylinder fits
the wheel-lift lift cylinder used on both car carriers and light duty wreckers.
See Features below to view specific models of each. To view part schematics
click the Brochures tab. Please remember that seal kits may fit different
cylinders of the same diameter. See the chart below for more information.
$52.99
Miller Swing L-Arm Cylinder Clevis Pin 5/8" x 1.5" Century Holmes Vulcan
This is the clevis pin for the Swing L-Arm cylinder on the Century Express 300
Series, Holmes 440SL and the Vulcan 810 Power Tilt light duty wreckers by
Miller Industries. This clevis pin measures 5/8" x 1.5". This pin is used to
connect the swing L-arm cylinder to the swing L-arm. To see which specific
models this pin fits please see Features below. To view part schematics
click on the Brochure tab.
$9.19
Miller Boom Lift Cylinder Seal Kit Century and Holmes
This is a Seal Kit for the Boom Lift Cylinder on Century and Holmes Light Duty
Wreckers by Miller Industries. This seal kit will fit the lift cylinder on
Century Formula I Duplex Tilt 411 & 412, and Holmes HP 552 / DFT 650. To view
part schematics click on the Brochures tab.
$41.99
Miller Right Wheel Cylinder Retainer
This is a replacement auto grip claw cylinder for second generation auto grip
autoloaders, 2003 and up. Right hand claw cylinder. This is the cylinder that
moves your right wheel retainer on your wheel lift.
$1,336.99
Chevron Auto Grip Claw Cylinder, Left, 2nd Generation
Replacement Auto Grip Claw Cylinder for Chevron second generation 2003 and up.
Left hand claw cylinder.
$1,336.99
Miller Wheel Lift Tilt Cylinder Upper Arm Pin Century Holmes
This is a Pin that is used in different locations on the Wheel Lift of Century
Formula I Duplex Tilt 411 & 412, and Holmes 440 Series / DFT 400 light Duty
wreckers by Miller Industries. This pin is used to hold the tilt cylinders on
to the wheel lift frame weldment. This pin also is used to attach the upper arm
weldments to the wheel lift frame weldment also. To view part schematics click
on the Brochure tab.
$90.99
Miller Snap Ring 1" External Vulcan Modular 880 / 890
This is a 1" Snap Ring by Miller Industries. This snap ring is used on the
wheel lift extend cylinder pin. This snap ring secures the pin in place. To
view the part schematic click on the Brochure tab.
$1.79
Miller Seal Kit Wheel Lift Fold Cylinder 12-0302919
This is a replacement Seal Kit for Wheel Lift Fold Cylinder 12-0302919.
$93.99
Miller Swing L-Arm Cylinder Century Challenger Holmes Vulcan
This is the Swing L-Arm Cylinder, also known as the Claw Cylinder, for autoload
wreckers by Miller Industries. This cylinder will fit Century Express 300
Series, Midnight Express Series, Challenger 4300 Express Series, Holmes 440SL,
Vulcan Modular 807, 810 Intruder and 810 Power Tilt Wreckers. To view part
schematics click the Brochures tab.
$776.99
Miller Rear Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan 6" x 7/8"
This is the rear extend cylinder pin for many light duty wreckers by Miller
Industries. This pin will work with most Century, Challenger, Champion, Holmes
and Vulcan light duty wreckers. This pin measure 6" long with a diamter of
7/8". To view specific wrecker models this pin fits see Features below.
$27.49
Miller Swing L-Arm Cylinder Pin Century Challenger Vulcan
This is the L-Arm side, Swing L-Arm Cylinder Pin. This pin fits cylinder part
number 12-0303844. This pin fits Century, Challenger and Vulcan wrecker models.
To view specific models see Features below. To view part schematics click on
the Brochures tab.
$85.99
Miller Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan
This is the front extend cylinder pin for the wheel lift extend cylinder on
Miller Industries Light Duty Wreckers. It replaced part number 12-0703345. To
view what models this pin fits on please see Features below. To view part
schematics click on the Brochures tab.
$39.99
Miller Seal Kit Wheel-Lift Extend Cylinder
This 12-004086 Seal Kit fits 10 Series Century, Holmes, Champion Wheel-lift
In/Out Cylinders using a 0302178 Cylinder 2.5" x 60" to 12/2002. This seal kit
will also fit wheel lift extend cylinder, 12-0303020, on Century, Challenger,
Champion, and Holmes Light Duty Wrecker Models. Please remember that seal kits
may fit different cylinders of the same diameter. See the chart below for more
information.
$48.99
Miller Seal Kit Swing L-Arm Cylinder 12-0303844
This is a replacement seal kit for the swing L-arm cylinder for autoload
wreckers by Miller Industries. This seal kit if for cylinder part number:
12-0303844.
$80.99
Miller Wheel Lift Extend Cylinder Century Challenger Holmes Vulcan
This is the Wheel Lift Extend Cylinder on Light Duty Wreckers by Miller
Industries. This extend cylinder will fit on the following models. The Century
300 Express Series, The Century 300 Modular Express Series, The Challenger 4300
Express Series, The Holmes 440SL Series, The Vulcan Modular 807, The Vulcan 810
Intruder, The Vulcan 812 Intruder, and The Vulcan 810 Power Tilt. To view part
schematics click the Brochure Tab.
$737.99
Miller Boom Extend Cylinder Seal Kit Century Challenger Holmes
This is the Seal Kit for the Boom Extend Cylinder on Miller Light Duty
Wreckers. This seal kit is for cylinder part number 12-0301755. To view what
models this will fit see Features below. To view part schematics click the
Brochures tab.
$19.49
Miller Wheel-Lift Lift Cylinder Seal Kit Century Challenger Champio Holmes Vulcan
This seal kit is designed to withstand the temperatures and pressures of
hydraulic cylinders and can help operators get the maximum productivity out of
their machine. Resealing cylinders is one way to help lower operating costs and
improve the performance of your machines hydraulic system. This cylinder fits
the wheel-lift lift cylinder used on both car carriers and light duty wreckers.
See Features below to view specific models of each. To view part schematics
click the Brochures tab. Please remember that seal kits may fit different
cylinders of the same diameter. See the chart below for more information.
$52.99
Miller Swing L-Arm Cylinder Clevis Pin 5/8" x 1.5" Century Holmes Vulcan
This is the clevis pin for the Swing L-Arm cylinder on the Century Express 300
Series, Holmes 440SL and the Vulcan 810 Power Tilt light duty wreckers by
Miller Industries. This clevis pin measures 5/8" x 1.5". This pin is used to
connect the swing L-arm cylinder to the swing L-arm. To see which specific
models this pin fits please see Features below. To view part schematics
click on the Brochure tab.
$9.19
Miller Boom Lift Cylinder Seal Kit Century and Holmes
This is a Seal Kit for the Boom Lift Cylinder on Century and Holmes Light Duty
Wreckers by Miller Industries. This seal kit will fit the lift cylinder on
Century Formula I Duplex Tilt 411 & 412, and Holmes HP 552 / DFT 650. To view
part schematics click on the Brochures tab.
$41.99
Miller Right Wheel Cylinder Retainer
This is a replacement auto grip claw cylinder for second generation auto grip
autoloaders, 2003 and up. Right hand claw cylinder. This is the cylinder that
moves your right wheel retainer on your wheel lift.
$1,336.99
Chevron Auto Grip Claw Cylinder, Left, 2nd Generation
Replacement Auto Grip Claw Cylinder for Chevron second generation 2003 and up.
Left hand claw cylinder.
$1,336.99
Miller Wheel Lift Tilt Cylinder Upper Arm Pin Century Holmes
This is a Pin that is used in different locations on the Wheel Lift of Century
Formula I Duplex Tilt 411 & 412, and Holmes 440 Series / DFT 400 light Duty
wreckers by Miller Industries. This pin is used to hold the tilt cylinders on
to the wheel lift frame weldment. This pin also is used to attach the upper arm
weldments to the wheel lift frame weldment also. To view part schematics click
on the Brochure tab.
$90.99
Miller Snap Ring 1" External Vulcan Modular 880 / 890
This is a 1" Snap Ring by Miller Industries. This snap ring is used on the
wheel lift extend cylinder pin. This snap ring secures the pin in place. To
view the part schematic click on the Brochure tab.
$1.79
Miller Seal Kit Wheel Lift Fold Cylinder 12-0302919
This is a replacement Seal Kit for Wheel Lift Fold Cylinder 12-0302919.
$93.99
Miller Swing L-Arm Cylinder Century Challenger Holmes Vulcan
This is the Swing L-Arm Cylinder, also known as the Claw Cylinder, for autoload
wreckers by Miller Industries. This cylinder will fit Century Express 300
Series, Midnight Express Series, Challenger 4300 Express Series, Holmes 440SL,
Vulcan Modular 807, 810 Intruder and 810 Power Tilt Wreckers. To view part
schematics click the Brochures tab.
$776.99
Miller Rear Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan 6" x 7/8"
This is the rear extend cylinder pin for many light duty wreckers by Miller
Industries. This pin will work with most Century, Challenger, Champion, Holmes
and Vulcan light duty wreckers. This pin measure 6" long with a diamter of
7/8". To view specific wrecker models this pin fits see Features below.
$27.49
Miller Swing L-Arm Cylinder Pin Century Challenger Vulcan
This is the L-Arm side, Swing L-Arm Cylinder Pin. This pin fits cylinder part
number 12-0303844. This pin fits Century, Challenger and Vulcan wrecker models.
To view specific models see Features below. To view part schematics click on
the Brochures tab.
$85.99
Miller Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan
This is the front extend cylinder pin for the wheel lift extend cylinder on
Miller Industries Light Duty Wreckers. It replaced part number 12-0703345. To
view what models this pin fits on please see Features below. To view part
schematics click on the Brochures tab.
$39.99
Miller Seal Kit Wheel-Lift Extend Cylinder
This 12-004086 Seal Kit fits 10 Series Century, Holmes, Champion Wheel-lift
In/Out Cylinders using a 0302178 Cylinder 2.5" x 60" to 12/2002. This seal kit
will also fit wheel lift extend cylinder, 12-0303020, on Century, Challenger,
Champion, and Holmes Light Duty Wrecker Models. Please remember that seal kits
may fit different cylinders of the same diameter. See the chart below for more
information.
$48.99
Miller Seal Kit Swing L-Arm Cylinder 12-0303844
This is a replacement seal kit for the swing L-arm cylinder for autoload
wreckers by Miller Industries. This seal kit if for cylinder part number:
12-0303844.
$80.99
Miller Wheel Lift Extend Cylinder Century Challenger Holmes Vulcan
This is the Wheel Lift Extend Cylinder on Light Duty Wreckers by Miller
Industries. This extend cylinder will fit on the following models. The Century
300 Express Series, The Century 300 Modular Express Series, The Challenger 4300
Express Series, The Holmes 440SL Series, The Vulcan Modular 807, The Vulcan 810
Intruder, The Vulcan 812 Intruder, and The Vulcan 810 Power Tilt. To view part
schematics click the Brochure Tab.
$737.99
Miller Boom Extend Cylinder Seal Kit Century Challenger Holmes
This is the Seal Kit for the Boom Extend Cylinder on Miller Light Duty
Wreckers. This seal kit is for cylinder part number 12-0301755. To view what
models this will fit see Features below. To view part schematics click the
Brochures tab.
$19.49
