0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
Miller Steel Wheel Lift L-Arm - Century, Holmes and Vulcan Wreckers
Note: Special Handling Fees Apply for Specific Items
This painted steel L-Arm from Miller Industries fits the wheel lifts on various models of Century, Holmes and Vulcan wreckers. Otherwise known as a tire restraint or wheel retainer, this L-Arm fits the crosstubes on the driver side. This part can be used to replace Driver Side Part Nos. 12-00803911 and 12-0803911 & Passenger Side Part Nos.12-00803912 and 12-0803912.
This painted steel L-Arm from Miller Industries fits the wheel lifts on various models of Century, Holmes and Vulcan wreckers. Otherwise known as a tire restraint or wheel retainer, this L-Arm fits the crosstubes on the driver side. This part can be used to replace Driver Side Part Nos. 12-00803911 and 12-0803911 & Passenger Side Part Nos.12-00803912 and 12-0803912.
- Option of driver or passenger position
- Painted steel
- Driver side (12-0806978) replaces driver side Part Nos. 12-00803911 and
12-0803911
Fits: - 2010 - Current Century Modular Midnight Express
- 2000 - Current Century Midnight Express
- 2007 - Current Century Express 300 Series Modular
- 2009 - Current Holmes 440SL
- 2007 - Current Vulcan Modular 807
- 2000 - Current Vulcan 810 Intruder
$635.99
Miller Seal Kit Wheel-Lift Extend Cylinder
This 12-004086 Seal Kit fits 10 Series Century, Holmes, Champion Wheel-lift
In/Out Cylinders using a 0302178 Cylinder 2.5" x 60" to 12/2002. This seal kit
will also fit wheel lift extend cylinder, 12-0303020, on Century, Challenger,
Champion, and Holmes Light Duty Wrecker Models. Please remember that seal kits
may fit different cylinders of the same diameter. See the chart below for more
information.
$48.99
Miller Seal Kit Wheel Lift Fold Cylinder 12-0302919
This is a replacement Seal Kit for Wheel Lift Fold Cylinder 12-0302919.
$93.99
Miller Seal Kit Swing L-Arm Cylinder 12-0303844
This is a replacement seal kit for the swing L-arm cylinder for autoload
wreckers by Miller Industries. This seal kit if for cylinder part number:
12-0303844.
$80.99
Miller Thrust Washer 5" x 1" x 1/16"
This Thrust Washer from Miller Industries is used in the boom, underlift, and
wheel lift assembly of Miller Wreckers. These wreckers include Century,
Challenger, Champion, Eagle, and Holmes Wreckers. The washer measures 5" in
diameter, 1" wide, and 1/16" thick. Please see the brochure tab for a list of
breakdowns.
$16.59
Miller 9" Rubber Strap
This 9" Rubber Strap from Miller Industries is used on the Wheel Lift and Tire
Restraint Assembly of Century, Champion, and Holmes Car Carriers. See the
features below for a full list of carriers and see the brochure tab for
breakdowns.
$2.39
Miller Inner Boom Bushing
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
$86.99
Related products
Miller Wheel-Lift Lift Cylinder Seal Kit Century Challenger Champio Holmes Vulcan
This seal kit is designed to withstand the temperatures and pressures of
hydraulic cylinders and can help operators get the maximum productivity out of
their machine. Resealing cylinders is one way to help lower operating costs and
improve the performance of your machines hydraulic system. This cylinder fits
the wheel-lift lift cylinder used on both car carriers and light duty wreckers.
See Features below to view specific models of each. To view part schematics
click the Brochures tab. Please remember that seal kits may fit different
cylinders of the same diameter. See the chart below for more information.
$52.99
Miller Swing L-Arm Cylinder Clevis Pin 5/8" x 1.5" Century Holmes Vulcan
This is the clevis pin for the Swing L-Arm cylinder on the Century Express 300
Series, Holmes 440SL and the Vulcan 810 Power Tilt light duty wreckers by
Miller Industries. This clevis pin measures 5/8" x 1.5". This pin is used to
connect the swing L-arm cylinder to the swing L-arm. To see which specific
models this pin fits please see Features below. To view part schematics
click on the Brochure tab.
$9.19
Miller Boom Lift Cylinder Seal Kit Century and Holmes
This is a Seal Kit for the Boom Lift Cylinder on Century and Holmes Light Duty
Wreckers by Miller Industries. This seal kit will fit the lift cylinder on
Century Formula I Duplex Tilt 411 & 412, and Holmes HP 552 / DFT 650. To view
part schematics click on the Brochures tab.
$41.99
Miller Right Wheel Cylinder Retainer
This is a replacement auto grip claw cylinder for second generation auto grip
autoloaders, 2003 and up. Right hand claw cylinder. This is the cylinder that
moves your right wheel retainer on your wheel lift.
$1,336.99
Chevron Auto Grip Claw Cylinder, Left, 2nd Generation
Replacement Auto Grip Claw Cylinder for Chevron second generation 2003 and up.
Left hand claw cylinder.
$1,336.99
Miller Wheel Lift Tilt Cylinder Upper Arm Pin Century Holmes
This is a Pin that is used in different locations on the Wheel Lift of Century
Formula I Duplex Tilt 411 & 412, and Holmes 440 Series / DFT 400 light Duty
wreckers by Miller Industries. This pin is used to hold the tilt cylinders on
to the wheel lift frame weldment. This pin also is used to attach the upper arm
weldments to the wheel lift frame weldment also. To view part schematics click
on the Brochure tab.
$90.99
Miller Snap Ring 1" External Vulcan Modular 880 / 890
This is a 1" Snap Ring by Miller Industries. This snap ring is used on the
wheel lift extend cylinder pin. This snap ring secures the pin in place. To
view the part schematic click on the Brochure tab.
$1.79
Miller Seal Kit Wheel Lift Fold Cylinder 12-0302919
This is a replacement Seal Kit for Wheel Lift Fold Cylinder 12-0302919.
$93.99
Miller Swing L-Arm Cylinder Century Challenger Holmes Vulcan
This is the Swing L-Arm Cylinder, also known as the Claw Cylinder, for autoload
wreckers by Miller Industries. This cylinder will fit Century Express 300
Series, Midnight Express Series, Challenger 4300 Express Series, Holmes 440SL,
Vulcan Modular 807, 810 Intruder and 810 Power Tilt Wreckers. To view part
schematics click the Brochures tab.
$776.99
Miller Rear Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan 6" x 7/8"
This is the rear extend cylinder pin for many light duty wreckers by Miller
Industries. This pin will work with most Century, Challenger, Champion, Holmes
and Vulcan light duty wreckers. This pin measure 6" long with a diamter of
7/8". To view specific wrecker models this pin fits see Features below.
$27.49
Miller Swing L-Arm Cylinder Pin Century Challenger Vulcan
This is the L-Arm side, Swing L-Arm Cylinder Pin. This pin fits cylinder part
number 12-0303844. This pin fits Century, Challenger and Vulcan wrecker models.
To view specific models see Features below. To view part schematics click on
the Brochures tab.
$85.99
Miller Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan
This is the front extend cylinder pin for the wheel lift extend cylinder on
Miller Industries Light Duty Wreckers. It replaced part number 12-0703345. To
view what models this pin fits on please see Features below. To view part
schematics click on the Brochures tab.
$39.99
Miller Seal Kit Wheel-Lift Extend Cylinder
This 12-004086 Seal Kit fits 10 Series Century, Holmes, Champion Wheel-lift
In/Out Cylinders using a 0302178 Cylinder 2.5" x 60" to 12/2002. This seal kit
will also fit wheel lift extend cylinder, 12-0303020, on Century, Challenger,
Champion, and Holmes Light Duty Wrecker Models. Please remember that seal kits
may fit different cylinders of the same diameter. See the chart below for more
information.
$48.99
Miller Seal Kit Swing L-Arm Cylinder 12-0303844
This is a replacement seal kit for the swing L-arm cylinder for autoload
wreckers by Miller Industries. This seal kit if for cylinder part number:
12-0303844.
$80.99
Miller Wheel Lift Extend Cylinder Century Challenger Holmes Vulcan
This is the Wheel Lift Extend Cylinder on Light Duty Wreckers by Miller
Industries. This extend cylinder will fit on the following models. The Century
300 Express Series, The Century 300 Modular Express Series, The Challenger 4300
Express Series, The Holmes 440SL Series, The Vulcan Modular 807, The Vulcan 810
Intruder, The Vulcan 812 Intruder, and The Vulcan 810 Power Tilt. To view part
schematics click the Brochure Tab.
$737.99
Miller Boom Extend Cylinder Seal Kit Century Challenger Holmes
This is the Seal Kit for the Boom Extend Cylinder on Miller Light Duty
Wreckers. This seal kit is for cylinder part number 12-0301755. To view what
models this will fit see Features below. To view part schematics click the
Brochures tab.
$19.49
Miller Wheel-Lift Lift Cylinder Seal Kit Century Challenger Champio Holmes Vulcan
This seal kit is designed to withstand the temperatures and pressures of
hydraulic cylinders and can help operators get the maximum productivity out of
their machine. Resealing cylinders is one way to help lower operating costs and
improve the performance of your machines hydraulic system. This cylinder fits
the wheel-lift lift cylinder used on both car carriers and light duty wreckers.
See Features below to view specific models of each. To view part schematics
click the Brochures tab. Please remember that seal kits may fit different
cylinders of the same diameter. See the chart below for more information.
$52.99
Miller Swing L-Arm Cylinder Clevis Pin 5/8" x 1.5" Century Holmes Vulcan
This is the clevis pin for the Swing L-Arm cylinder on the Century Express 300
Series, Holmes 440SL and the Vulcan 810 Power Tilt light duty wreckers by
Miller Industries. This clevis pin measures 5/8" x 1.5". This pin is used to
connect the swing L-arm cylinder to the swing L-arm. To see which specific
models this pin fits please see Features below. To view part schematics
click on the Brochure tab.
$9.19
Miller Boom Lift Cylinder Seal Kit Century and Holmes
This is a Seal Kit for the Boom Lift Cylinder on Century and Holmes Light Duty
Wreckers by Miller Industries. This seal kit will fit the lift cylinder on
Century Formula I Duplex Tilt 411 & 412, and Holmes HP 552 / DFT 650. To view
part schematics click on the Brochures tab.
$41.99
Miller Right Wheel Cylinder Retainer
This is a replacement auto grip claw cylinder for second generation auto grip
autoloaders, 2003 and up. Right hand claw cylinder. This is the cylinder that
moves your right wheel retainer on your wheel lift.
$1,336.99
Chevron Auto Grip Claw Cylinder, Left, 2nd Generation
Replacement Auto Grip Claw Cylinder for Chevron second generation 2003 and up.
Left hand claw cylinder.
$1,336.99
Miller Wheel Lift Tilt Cylinder Upper Arm Pin Century Holmes
This is a Pin that is used in different locations on the Wheel Lift of Century
Formula I Duplex Tilt 411 & 412, and Holmes 440 Series / DFT 400 light Duty
wreckers by Miller Industries. This pin is used to hold the tilt cylinders on
to the wheel lift frame weldment. This pin also is used to attach the upper arm
weldments to the wheel lift frame weldment also. To view part schematics click
on the Brochure tab.
$90.99
Miller Snap Ring 1" External Vulcan Modular 880 / 890
This is a 1" Snap Ring by Miller Industries. This snap ring is used on the
wheel lift extend cylinder pin. This snap ring secures the pin in place. To
view the part schematic click on the Brochure tab.
$1.79
Miller Seal Kit Wheel Lift Fold Cylinder 12-0302919
This is a replacement Seal Kit for Wheel Lift Fold Cylinder 12-0302919.
$93.99
Miller Swing L-Arm Cylinder Century Challenger Holmes Vulcan
This is the Swing L-Arm Cylinder, also known as the Claw Cylinder, for autoload
wreckers by Miller Industries. This cylinder will fit Century Express 300
Series, Midnight Express Series, Challenger 4300 Express Series, Holmes 440SL,
Vulcan Modular 807, 810 Intruder and 810 Power Tilt Wreckers. To view part
schematics click the Brochures tab.
$776.99
Miller Rear Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan 6" x 7/8"
This is the rear extend cylinder pin for many light duty wreckers by Miller
Industries. This pin will work with most Century, Challenger, Champion, Holmes
and Vulcan light duty wreckers. This pin measure 6" long with a diamter of
7/8". To view specific wrecker models this pin fits see Features below.
$27.49
Miller Swing L-Arm Cylinder Pin Century Challenger Vulcan
This is the L-Arm side, Swing L-Arm Cylinder Pin. This pin fits cylinder part
number 12-0303844. This pin fits Century, Challenger and Vulcan wrecker models.
To view specific models see Features below. To view part schematics click on
the Brochures tab.
$85.99
Miller Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan
This is the front extend cylinder pin for the wheel lift extend cylinder on
Miller Industries Light Duty Wreckers. It replaced part number 12-0703345. To
view what models this pin fits on please see Features below. To view part
schematics click on the Brochures tab.
$39.99
Miller Seal Kit Wheel-Lift Extend Cylinder
This 12-004086 Seal Kit fits 10 Series Century, Holmes, Champion Wheel-lift
In/Out Cylinders using a 0302178 Cylinder 2.5" x 60" to 12/2002. This seal kit
will also fit wheel lift extend cylinder, 12-0303020, on Century, Challenger,
Champion, and Holmes Light Duty Wrecker Models. Please remember that seal kits
may fit different cylinders of the same diameter. See the chart below for more
information.
$48.99
Miller Seal Kit Swing L-Arm Cylinder 12-0303844
This is a replacement seal kit for the swing L-arm cylinder for autoload
wreckers by Miller Industries. This seal kit if for cylinder part number:
12-0303844.
$80.99
Miller Wheel Lift Extend Cylinder Century Challenger Holmes Vulcan
This is the Wheel Lift Extend Cylinder on Light Duty Wreckers by Miller
Industries. This extend cylinder will fit on the following models. The Century
300 Express Series, The Century 300 Modular Express Series, The Challenger 4300
Express Series, The Holmes 440SL Series, The Vulcan Modular 807, The Vulcan 810
Intruder, The Vulcan 812 Intruder, and The Vulcan 810 Power Tilt. To view part
schematics click the Brochure Tab.
$737.99
Miller Boom Extend Cylinder Seal Kit Century Challenger Holmes
This is the Seal Kit for the Boom Extend Cylinder on Miller Light Duty
Wreckers. This seal kit is for cylinder part number 12-0301755. To view what
models this will fit see Features below. To view part schematics click the
Brochures tab.
$19.49
