Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
These Hi-Amp Circuit Breakers are ideal for cranes, dump hoists, lift gates,
plows, spreaders, switch panels and power distribution panels. Choose from 50,
80, 100, or 150 Amp Circuit Breakers. These circuit breakers double as a master
disconnect as well. In the event of a "short circuit" the circuit breaker will
"trip" to the off position. Unlike an automatic reset, the manual version stays
open until it is manually reset. By pushing the reset button you can also
disconnect the entire system. This is extremely helpful when servicing the
electrical system.
3M Acrylic Foam Tape 4229P is a 0.76mm thick, medium-density, dark grey acrylic foam double sided adhesive tape with high performance acrylic adhesives. Double Sided Acrylic foam adhesive tape is grey with red polyethylene release liner. General purpose double sided adhesive tape with superior adhesive bonding strength for a wide variety of surfaces. Can be used to stick neodymium magnets to non-ferrous material surfaces like plastic, copper, stainless steel, wood, glass, tiles, concrete as these materials does not work directly with magnets. The acrylic foam of 0.76mm thick allows the adhesive to mould to slightly rough surfaces like concrete.
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
This waterproof Flood Light from Buyers Products has 6 white LEDs with a black
powder coated cast aluminum housing. This light is a 12-24 volt system with a
1.5 Amp draw that has an output of 1620 Lumens. Light comes with an adjustable
stainless steel stud mount. The dimensions for this flood light are 5.75" W x
2" T x 3" D and weights around 1.6 lbs.
LED Light Strips are ideal for compartment and cargo work spaces of trucks,
trailers, toolboxes, RV's and more. Space saving low profile design is 1/2"
wide and only 0.2" tall. Self adhesive backing for easy installation on any
surface. Includes clips and screws for alternate mounting. IP68 rated
completely sealed waterproof electronics. 12 volt DC.
These are LED Ultra-Thin Strobe Lights from Buyers Products. These are lights run off of
12 volts and draw 0.5 amps. They also have 23 flash patterns that let you
customize the look of your equipment. These lights include retail packaging and
a 5 year warranty.
Every year more fleet managers, tradesmen, and fire chiefs outfit their trucks
with Dri-Dek. Why? Because it works. Dri-Dek cushions equipment and when it
gets wet, the raised flow-through surface lets air flow for fast drying. It
stands up to oils, grease, alkalies and solvents. It supports the weight in any
climate without cracking or buckling. Installs in minutes, lasts for years.
Sold by square foot. Also available in 3'x4' Sheets
and 3'x12' Rolls. Complete your area with the Dri-Dek corner and edge pieces to
smooth and round out your full body mat.
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
In The Ditch's Trash Can Mounts are made from aluminum and can be easily
mounted to the deck of a wrecker or any flat surface. You can choose from
either a 4 gallon trash can mount or a 6 gallon trash can mount. Both are made
from 1/8" thick aluminum and are easy to install with pre-drilled mounting
holes. These mounts do not include a trash can or the bungee cords. Shop for
your new
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
Phoenix electrical junction blocks are high-quality, easy-to-use terminal
blocks that allow you to connect multiple electrical sources in your car,
truck, trailer, or RV. They feature a two-piece design and are available with a
range of poles to accommodate a variety of wiring requirements. These blocks
ensure that your wires stay in place and don't contact other leads, keeping all
of your electrical devices organized and safe from short circuiting.
This 22" Wireless Tow Light from TowMate is known as the "Lime Light" because
of its lime color. The Lime Light is TowMate's best-selling wireless tow light.
It has 14 LED's that provide stop, turn, and tail signals wirelessly. This
basic unit is not compatible with an I-Mon reminder system. It comes with two
90 lb. pull magnets that have rubber boots, making it easy to mount just about
anywhere. Choose from any transmitter at no additional charge. The transmitter
options include 4-PIN Round (Standard), 4 PIN Flat, 6 PIN Round, 7 PIN Round, 7
PIN RV Style, and a Hardwire Transmitter. If you're looking for style, savings,
and dependability, then this tow light is for you.
This Zip's Custom camera guard is used on the Vulcan 810 wrecker. This
stainless steel camera guard helps prevent any damage to your rear camera on
your wrecker. New design stainless steel does not need to be painted.
These are custom made dolly axle storage brackets that are used to store your dolly axles on the body of your light duty wrecker. These are made specifically for Vulcan 810, 812, and Century 312 Wreckers.
Miller Industries 33" Aluminum Tubular Pylon. Available optional light pylonfor all Century and Vulcan small & medium wreckers. Requires work lights andsignals to be in the light bar. Powder Coated BLACK as Factory.
24" Tall Steel Light Pylon from Miller Industries. Installation includes a
plastic isolator between the pylon and the body. This light pylon fits Chevy
3500's with tunnel toolbox.
38" Tall Steel Light Pylon from Miller Industries. Installation includes a
plastic isolator between the pylon and the body. This light pylon will fib a
58" cab height.
36" Tall Steel Light Pylon from Miller Industries. Installation includes a
plastic isolator between the pylon and the body. This light pylon will fit 51"
cab height on the deck of a bed.
This aluminum diamond plate dress-up kit from Miller Industries is for the
inside of the 124002342 steel light pylon. This trim panel covers the back side
of lights and wiring.
This aluminum diamond plate dress-up kit from Miller Industries is for the
inside of the 124002340 steel light pylon. This trim panel covers the back side
of lights and wiring.
Miller Industries 33" Aluminum Tubular Pylon. Available optional light pylonfor all Century and Vulcan small & medium wreckers. Requires work lights andsignals to be in the light bar.
25" Aluminum Tubular Pylon - Available Optional Light Pylon For all Century And
Vulcan Small Wreckers For Use On Top Of A Tunnel Box. Requires Work Lights and
Signals to Be in the Light Bar.
This is an all aluminum 1.5" spacer for light duty tubular pylons. This spacerkit comes with all required mounting hardware and provides additional heightfor the pylon and light bar.
42" Aluminum Tubular Pylon, Optional Light Pylon on Century 3212, Century 3212 CX2, Vulcan VX2, and Vulcan V30-VX body. Requires Work Lights and Signals to Be in the Light Bar.
33" Tall Aluminum Light Pylon from Miller Industries. Installation Includes a
plastic isolator between the pylon and the body. This light pylon fits on Chevy
3500's without tunnel toolbox, For F-350 through F-450's without tunnel
toolbox, and Dodge 3500 through 5500 without tuneel toolbox. This part can be
used to replace Part Number 124002343.
33" Tall Steel Light Pylon from Miller Industries. Installation Includes a
plastic isolator between the pylon and the body. This light pylon fits on Chevy
3500's without tunnel toolbox, For F-350 through F-450's without tunnel
toolbox, and Dodge 3500 through 5500 without tuneel toolbox.
This aluminum diamond plate dress-up kit from Miller Industries is for the
inside of the 124002343 steel light pylon. This trim panel covers the back side
of lights and wiring.
Miller Industries 33" Aluminum Tubular Pylon. Available optional light pylonfor all Century and Vulcan small & medium wreckers. Requires work lights andsignals to be in the light bar. Powder Coated BLACK as Factory.
24" Tall Steel Light Pylon from Miller Industries. Installation includes a
plastic isolator between the pylon and the body. This light pylon fits Chevy
3500's with tunnel toolbox.
38" Tall Steel Light Pylon from Miller Industries. Installation includes a
plastic isolator between the pylon and the body. This light pylon will fib a
58" cab height.
36" Tall Steel Light Pylon from Miller Industries. Installation includes a
plastic isolator between the pylon and the body. This light pylon will fit 51"
cab height on the deck of a bed.
This aluminum diamond plate dress-up kit from Miller Industries is for the
inside of the 124002342 steel light pylon. This trim panel covers the back side
of lights and wiring.
This aluminum diamond plate dress-up kit from Miller Industries is for the
inside of the 124002340 steel light pylon. This trim panel covers the back side
of lights and wiring.
Miller Industries 33" Aluminum Tubular Pylon. Available optional light pylonfor all Century and Vulcan small & medium wreckers. Requires work lights andsignals to be in the light bar.
25" Aluminum Tubular Pylon - Available Optional Light Pylon For all Century And
Vulcan Small Wreckers For Use On Top Of A Tunnel Box. Requires Work Lights and
Signals to Be in the Light Bar.
This is an all aluminum 1.5" spacer for light duty tubular pylons. This spacerkit comes with all required mounting hardware and provides additional heightfor the pylon and light bar.
42" Aluminum Tubular Pylon, Optional Light Pylon on Century 3212, Century 3212 CX2, Vulcan VX2, and Vulcan V30-VX body. Requires Work Lights and Signals to Be in the Light Bar.
33" Tall Aluminum Light Pylon from Miller Industries. Installation Includes a
plastic isolator between the pylon and the body. This light pylon fits on Chevy
3500's without tunnel toolbox, For F-350 through F-450's without tunnel
toolbox, and Dodge 3500 through 5500 without tuneel toolbox. This part can be
used to replace Part Number 124002343.
33" Tall Steel Light Pylon from Miller Industries. Installation Includes a
plastic isolator between the pylon and the body. This light pylon fits on Chevy
3500's without tunnel toolbox, For F-350 through F-450's without tunnel
toolbox, and Dodge 3500 through 5500 without tuneel toolbox.
This aluminum diamond plate dress-up kit from Miller Industries is for the
inside of the 124002343 steel light pylon. This trim panel covers the back side
of lights and wiring.