0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
Miller Deck Mount Pylons 10 12 15 16 Series
These Car Carrier Pylons are used with Miller Century, Champion, Challenger,
Holmes, and Vulcan Rollbacks. They fit 10, 12, 15, and 16 Series beds. These
deck mounted pylons come in a variety of heights from 38" to 68". Car Carrier
Pylons are commonly used as cab protectors. See application chart under the
brochures tab.
$1,016.99
–
$1,047.99
3M Acrylic Foam Tape
3M Acrylic Foam Tape 4229P is a 0.76mm thick, medium-density, dark grey acrylic foam double sided adhesive tape with high performance acrylic adhesives. Double Sided Acrylic foam adhesive tape is grey with red polyethylene release liner. General purpose double sided adhesive tape with superior adhesive bonding strength for a wide variety of surfaces. Can be used to stick neodymium magnets to non-ferrous material surfaces like plastic, copper, stainless steel, wood, glass, tiles, concrete as these materials does not work directly with magnets. The acrylic foam of 0.76mm thick allows the adhesive to mould to slightly rough surfaces like concrete.
$1.25
RC Industries M Series Aluminum Toolbox w/Stainless Steel Door
RC Industries Aluminum Toolboxes provide superior security, convenience, and protection for whatever you
want to store. Heavy Duty Aluminum Toolbox.
$692.99
–
$1,717.99
Buyers Round 375 Lumens LED Flood Light
This 5" Work Light from Buyers Products has a 54 LED flood bulb that has a very
low amp draw. The 5" sealed rubber housing has a polycarbonate lens that
includes a 5/16" stainless steel stud and universal adjustable mounting
bracket. The housing is shock resistant, waterproof, and dust resistant. This
light measures 4.92" wide x 3.15" diameter x 7" high. This light is DOT and SAE
approved.
$29.09
Temflex Vinyl Insulating Electrical Tape
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
$2.99
Whelen Towman's Justice Low-Profile Light Bars
Note: Special Handling Fees Apply for Specific Items
The "Justice" Towman's series light bar from Whelen is a high performance, cost competitive 62" Super-LED light bar with a wide range of options. Designed for ease of operation and serviceability. This light bar comes standard with Stop/Turn/Tail lights. Upgrade easily with more LED's, a traffic advisor and work lights.
The "Justice" Towman's series light bar from Whelen is a high performance, cost competitive 62" Super-LED light bar with a wide range of options. Designed for ease of operation and serviceability. This light bar comes standard with Stop/Turn/Tail lights. Upgrade easily with more LED's, a traffic advisor and work lights.
- JFOFAAAA-Updated configuartion Jan 2021-18 Amber LED's w/ 2 Work Lights & S/T/T
- 62"L x 2-1/4"H x 12"D
- Front, rear and all bar operation control
- Optional Scan-LockT flash patterns
- Pattern override feature
- Low power operation
- SAE Class 1
- Includes (3) slide bolt mounting brackets for permanent mount: RMK20S
- Replacement (2) slide bolt mounting brackets option: RMK9S
- Five-Year Warranty
$1,329.99
–
$1,990.99
Zip's Toolbox Mount Bracket LR-1
Easily mount toolboxes on rollbacks or carriers. Used for underbody
toolboxes on car carrier beds.
$132.99
–
$190.99
Zip's Special Toolbox Mounting Bracket LR-5
Note: Special Handling Fees Apply for Specific Items
Easily mount toolboxes on rollbacks or carriers. Used for 24" X 24" toolboxes on car carrier beds.
Easily mount toolboxes on rollbacks or carriers. Used for 24" X 24" toolboxes on car carrier beds.
- 24"X24" or 24"X30"
- Pre drilled holes
- Sturdy steel angle iron
- Sold as each
Available in the following sizes
Item # Size Finish LR-2G 24" x 24" Galvanized LR-5 24" x 24" Powder Coated Black LR-5TG 24" X 30" Tall Galvanized LR-5T 24" X 30" Tall Powder Coated Black
$178.99
–
$240.99
Maxxima 3/4" Round Marker Lights w/ Clear Lens and Grommets
Maxxima M09300 Series of P2PC Combination Mini-Clearance Marker Lights. Each
Light Comes With An Attached Grommet For Quick Mounting. 3 SMD LED's Provide
Superior Light Output Meeting PC Requirements.
$5.89
–
$7.49
Maxxima 1 1/4" Round Mini Combination Clearance Marker Lights
The M09400 series of 1 1/4" P2PC combination mini-clearance and auxiliary
lights. Each light comes with attached grommet for quick mounting. 6 LEDs
provide superior light output meeting PC requirements. Available in seven
models. Red, Red Clear Lens, Amber, Amber Clear Lens, Blue, Green, and
White. "LED" represent the cutting edge of lighting technology, LED lights
operate on a totally different concept than traditional incandescent or bulb
style lights. Instead of using a brittle metal filament that is susceptible to
road shock and vibration. LEDs are solid-state devices utilizing an electronic
chip that is encapsulated in an epoxy substrate. This design provides increased
durability and a protective seal from road elements like dirt moisture and
other corrosive agents.
$8.29
–
$9.89
Maxxima 3/4" Stainless Grommet Cover
Stainless Steel Grommet cover for M09300 Clearance Marker Series, by Maxxima.
$1.99
Maxxima Stainless Steel Grommet Cover
Elevate the durability and style of your vehicle's lighting system with this high-quality accessory. Crafted from premium stainless steel, this grommet cover provides exceptional resistance to corrosion, ensuring long-lasting performance and protection for your M09400 Series lights. It acts as a sturdy shield, safeguarding the lights from dirt, debris, and moisture, prolonging their lifespan and keeping them looking pristine.
$2.29
Maxxima Oval Black Grommet 6"
6" Oval Black Vinyl Grommet for Standard Oval Stop Tail Turn LED Lights and
Back-Up Lights, by Maxxima.
$1.59
Whelen M6 Series Solid State Flange
The solid state flange assembly will be made of a grey polycarbonate then
incased in a chrome plated finish or a black finish. The M6FC and the M6FB
shall have the ability to surface mount any M6 Super-LED series warning lights.
The M6 series warning light is sold separately.
$11.99
–
$17.29
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Muncie Hydraulic Pump O Ring Port 15 Gal
This Hydraulic Pump from Muncie has a 15 gallon per minute flow at 1,000 RPM.
The PK Series Pumps from Muncie are designed to meet the application needs of
either a pump or a motor. The all cast iron construction has 4 ports and a
roller bearing design. The pumps bi-rotational feature helps reduce inventory
requirements. It has a 2 bolt mount, 7/8 - 13 spline input shaft and O-ring
ports on the rear and sides of the pump. This pump is used on Miller Car
Carriers 2003 and newer. This pump will also work on a Vulcan 984 also. This part has replaced part number
$937.99
Phoenix 12 Position Junction Box
Phoenix electrical junction blocks are high-quality, easy-to-use terminal
blocks that allow you to connect multiple electrical sources in your car,
truck, trailer, or RV. They feature a two-piece design and are available with a
range of poles to accommodate a variety of wiring requirements. These blocks
ensure that your wires stay in place and don't contact other leads, keeping all
of your electrical devices organized and safe from short circuiting.
$16.19
Phoenix Stainless Steel Stanchion Kit
Note: Special Handling Fees Apply for Specific Items
$43.29
–
$273.99
Phoenix QuickTrim Hub Cover 4 Spline
Phoenix QuickTrim Smooth Middle Hub Cover Kit for the Front Axle on Medium and
Heavy Duty Trucks. Hub Cover is 4 spline front pop-in.
$25.49
Related products
Muncie 15 GPM Pump K Series
MUN PK Series hydraulic pump short front cover. 3.45 ci 7/8" 13 spline shaft SAE "B" flange straight thread side port left hand rotation w/Relief Valve.
$1,167.99
Muncie Pump O'Ring Port 17 GPM 1.5"
This Hydraulic Pump from Muncie has a 17 gallon per minute flow at 1,000 RPM.
The PK Series Pumps from Muncie are designed to meet the application needs of
either a pump or a motor. The all cast iron construction has 4 ports and a
roller bearing design. The pumps bi-rotational feature helps reduce inventory
requirements. It has a 2 bolt mount, 7/8 - 13 spline input shaft and O-ring
ports on the rear and sides of the pump. Sometimes used to replace 12-0306031
Miller car carrier hydraulic pump for increased flow.
$945.99
Miller Fitting Connector 3/8" MJ x 1/2" MB
This Hydraulic Fitting Connector from Miller Industries measures 3/8" MJ x 1/2"
MB. It is used on the Hydraulics Assembly of several Miller Car Carriers. These
Carriers include Century, Challenger, Champion, Holmes, and Vulcan. See the
features below for a full list of carriers and see the brochure tab for
breakdowns.
$3.59
PTO Allison Tee Lube 643 / 2000
Lube "T" fitting - required in the oil return cooling line to supply low
pressure to the idler shaft of the Chelsea PTOs.
$115.99
Pto, Muncie 109%, Sae"B" Flang
This is a Muncie PTO, 109%, dual action air shift with solenoid control, SAE
"B" Flange" typically used on wreckers 50 ton & over and on all rotators.
$4,218.99
Muncie PTO, 109%, SAE "B" Flange
This is a 109%, SAE "B" flange Muncie PTO with a 4" pilot and 14 T spline.
$4,085.99
Miller Hose Assembly 14"
This 14" Hose Assembly from Miller Industries is used on the Hydraulics
Assembly of several Miller Car Carriers. These include Century, Challenger,
Champion, Holmes, and Vulcan Carriers. See the features below for a full list
of carriers and see the brochure tab for breakdowns.
$30.99
Muncie Hydraulic Pump O Ring Port 15 Gal
This Hydraulic Pump from Muncie has a 15 gallon per minute flow at 1,000 RPM.
The PK Series Pumps from Muncie are designed to meet the application needs of
either a pump or a motor. The all cast iron construction has 4 ports and a
roller bearing design. The pumps bi-rotational feature helps reduce inventory
requirements. It has a 2 bolt mount, 7/8 - 13 spline input shaft and O-ring
ports on the rear and sides of the pump. This pump is used on Miller Car
Carriers 2003 and newer. This pump will also work on a Vulcan 984 also. This part has replaced part number
$937.99
Muncie Pump O-Ring Port 11 Gal
This Hydraulic Pump from Muncie has an 11 gallon per minute flow at 1,000 RPM.
The PK Series Pumps from Muncie are designed to meet the application needs of
either a pump, or a motor. The all cast iron construction has 4 ports and a
roller bearing design. It has a bi-rotational feature that helps reduce
inventory requirements. There is a 2 bolt mount, 7/8"-13 spline input shaft,
and O-Ring ports on the rear and sides of the pump. Use this pump on Miller
Carriers made in 2002 or older.
$912.99
B/A Products Hose Splice Kit
The B/A Products hose splice repair kits are perfect for temporary repairs on
the roadside. These splice kits will allow the operator to load and unload
while avoiding costly road service repairs.
$35.99
Miller Hose Vulcan 1/4" x 157"
This Hose Assembly from Miller Industries is used on the Wheel Lift Hydraulics
Assembly of Vulcan 810 Intruders and Holmes 440SL Wreckers. The hose is 1/4" x
157" long.
$105.99
Muncie 15 GPM Pump K Series
MUN PK Series hydraulic pump short front cover. 3.45 ci 7/8" 13 spline shaft SAE "B" flange straight thread side port left hand rotation w/Relief Valve.
$1,167.99
Muncie Pump O'Ring Port 17 GPM 1.5"
This Hydraulic Pump from Muncie has a 17 gallon per minute flow at 1,000 RPM.
The PK Series Pumps from Muncie are designed to meet the application needs of
either a pump or a motor. The all cast iron construction has 4 ports and a
roller bearing design. The pumps bi-rotational feature helps reduce inventory
requirements. It has a 2 bolt mount, 7/8 - 13 spline input shaft and O-ring
ports on the rear and sides of the pump. Sometimes used to replace 12-0306031
Miller car carrier hydraulic pump for increased flow.
$945.99
Miller Fitting Connector 3/8" MJ x 1/2" MB
This Hydraulic Fitting Connector from Miller Industries measures 3/8" MJ x 1/2"
MB. It is used on the Hydraulics Assembly of several Miller Car Carriers. These
Carriers include Century, Challenger, Champion, Holmes, and Vulcan. See the
features below for a full list of carriers and see the brochure tab for
breakdowns.
$3.59
PTO Allison Tee Lube 643 / 2000
Lube "T" fitting - required in the oil return cooling line to supply low
pressure to the idler shaft of the Chelsea PTOs.
$115.99
Pto, Muncie 109%, Sae"B" Flang
This is a Muncie PTO, 109%, dual action air shift with solenoid control, SAE
"B" Flange" typically used on wreckers 50 ton & over and on all rotators.
$4,218.99
Muncie PTO, 109%, SAE "B" Flange
This is a 109%, SAE "B" flange Muncie PTO with a 4" pilot and 14 T spline.
$4,085.99
Miller Hose Assembly 14"
This 14" Hose Assembly from Miller Industries is used on the Hydraulics
Assembly of several Miller Car Carriers. These include Century, Challenger,
Champion, Holmes, and Vulcan Carriers. See the features below for a full list
of carriers and see the brochure tab for breakdowns.
$30.99
Muncie Hydraulic Pump O Ring Port 15 Gal
This Hydraulic Pump from Muncie has a 15 gallon per minute flow at 1,000 RPM.
The PK Series Pumps from Muncie are designed to meet the application needs of
either a pump or a motor. The all cast iron construction has 4 ports and a
roller bearing design. The pumps bi-rotational feature helps reduce inventory
requirements. It has a 2 bolt mount, 7/8 - 13 spline input shaft and O-ring
ports on the rear and sides of the pump. This pump is used on Miller Car
Carriers 2003 and newer. This pump will also work on a Vulcan 984 also. This part has replaced part number
$937.99
Muncie Pump O-Ring Port 11 Gal
This Hydraulic Pump from Muncie has an 11 gallon per minute flow at 1,000 RPM.
The PK Series Pumps from Muncie are designed to meet the application needs of
either a pump, or a motor. The all cast iron construction has 4 ports and a
roller bearing design. It has a bi-rotational feature that helps reduce
inventory requirements. There is a 2 bolt mount, 7/8"-13 spline input shaft,
and O-Ring ports on the rear and sides of the pump. Use this pump on Miller
Carriers made in 2002 or older.
$912.99
B/A Products Hose Splice Kit
The B/A Products hose splice repair kits are perfect for temporary repairs on
the roadside. These splice kits will allow the operator to load and unload
while avoiding costly road service repairs.
$35.99
Miller Hose Vulcan 1/4" x 157"
This Hose Assembly from Miller Industries is used on the Wheel Lift Hydraulics
Assembly of Vulcan 810 Intruders and Holmes 440SL Wreckers. The hose is 1/4" x
157" long.
$105.99
