0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
Buss Bar Single 3/8"
You can used this buss bar to extend wires of the battery. It is commonly
mounted on the frame of your truck.
$13.74
Stellar 8 Drawer Toolbox Systems
This Stellar (formerly American Eagle) heavy duty steel drawer system has a flat top shelf. Has a
.5" or a 2.5" high riser. All drawer widths in the product line utilize our
unique key locking T handle. This feature provides a one-handed operation and
conceals the latch mechanism for heavy-duty protection and an attractive
appearance. Drawer systems are custom-made to your specifications. Each drawer
system is engineered to fit your truck s compartment and configured with the
drawer sizes that will work best for you.
$2,006.99
–
$2,246.99
Buyers LED Strip Lighting
LED Light Strips are ideal for compartment and cargo work spaces of trucks,
trailers, toolboxes, RV's and more. Space saving low profile design is 1/2"
wide and only 0.2" tall. Self adhesive backing for easy installation on any
surface. Includes clips and screws for alternate mounting. IP68 rated
completely sealed waterproof electronics. 12 volt DC.
$16.89
–
$67.99
Temflex Vinyl Insulating Electrical Tape
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
$2.99
Piusi K24 Aluminum Meter NPT Threads
The new UL approved K24 Inline Turbine Meter is suitable for use with Gasoline, Diesel, and Kerosene. The UL (Underwriters Laboratory) approval assures the product and its components are suitable for the application specified. It is easy to install and is equipped with a rotatable screen, sturdy aluminum casing, and sealed electronic card, making the K24 the ideal instrument for
fluid monitoring under any condition.
$230.99
Zip's Toolbox Mount Bracket Galvanized LR-2
These Galvanized Toolbox Mounting Bracket easily mounts toolboxes on
rollbacks or carriers. It is used for 20" or 24" deep underbody toolboxes on car
carrier beds. Sold as a pair.
$127.99
–
$189.99
Whelen M6 Series Solid State Flange
The solid state flange assembly will be made of a grey polycarbonate then
incased in a chrome plated finish or a black finish. The M6FC and the M6FB
shall have the ability to surface mount any M6 Super-LED series warning lights.
The M6 series warning light is sold separately.
$11.99
–
$17.29
Whelen M6 Series Linear Super LED Surface Mount Light
These lights have a unique lens shape and patented Linear-LED's designed
reflector assembly, M Series lightheads are completely illuminated for
unmatched high intensity warning and low current consumption. These are single
color LED lightheads offered with either a colored or clear lens.
$194.99
–
$228.99
Whelen M6 V-Series Linear Super LED Combination Lighthead
V-SeriesT Combination 180° Warning and Perimeter Light, Scan-LockT With a
unique lens shape and patented Linear-LEDr designed reflector assembly, M
Series lightheads are completely illuminated for unmatched high intensity
warning and low current consumption. These lights have a built in flash control
with 165 scan lock patterns available. SAE Class 1 certified. Lens and
reflector are a sealed assembly. Fast and easy installation with only 2 screws.
The dimensions of these lights are 6-3/4"L x 4-5/16"H x 2-1/4"D.
$495.99
–
$567.99
Whelen M7 Series Linear Super LED Surface Mount Light
These lights have a unique lens shape and patented Linear-LEDr designed
reflector assembly, M Series lightheads are completely illuminated for
unmatched high intensity warning and low current consumption.
$193.99
–
$269.99
Whelen M9 Series Linear Super LED Surface Mount
Warning with Internal Flasher with Flash Patterns and Synchronize Feature with
a unique lens shape and patented Linear-LEDr designed reflector assembly, M
Series light heads are completely illuminated for unmatched high intensity
warning and low current consumption.
$285.99
–
$403.99
Whelen M9V2 Series Combination Warning and Scene Light
This combination light is a warning light and a perimeter light with a split
color (color/clear) non-optic polycarbonate lens. The warning light consists of
four PC boards containing three red Super-LEDs on each PC board. The warning
light PC boards will be installed on a V-shaped mounting bracket.
$756.99
–
$832.99
Reelcraft HD70000 Series Air/Water Hose Reels
Nobody should have to worry about parts breaking down on them anymore. With the Reelcraft HD70000 Series Air/Water Hose Reel, you’ll have a tool that should last a lifetime. It comes with a heavy-duty steel construction and corrosion-resistant finish ensuring the reel can handle just about anything. And if that wasn’t enough, the buna seal prevents any water or air from leaking out.
$597.99
–
$669.99
Whelen Strip-Lite Plus Single Color Warning Light
Whelen's Strip-Lite Plus Warning Light and Sequencing Light, features an all-new wide-angle Linear-LED? optic design for high intensity light output and patent-pending Water Block Technology for optimal durability. Engineered for mounting versatility, the sleek Strip-Lite Plus Warning Light is available with SOLO? or DUO? technology.
$106.99
–
$112.99
Truck-Lite 33 Series 3/4" LED Lights w/ Clear Lens
These 33 Series 3/4" Sealed LED Lights from Truck-Lite are the worlds smallest
LED marker for the transportation industry. Choose from a Red or Yellow light,
both colors come with a clear lens and they are completely sealed in epoxy to
resist corrosion and moisture. These lights draw less current, which allows for
more power on your other vehicle requirements.
$21.49
Related products
Muncie 15 GPM Pump K Series
MUN PK Series hydraulic pump short front cover. 3.45 ci 7/8" 13 spline shaft SAE "B" flange straight thread side port left hand rotation w/Relief Valve.
$1,167.99
Muncie Pump O'Ring Port 17 GPM 1.5"
This Hydraulic Pump from Muncie has a 17 gallon per minute flow at 1,000 RPM.
The PK Series Pumps from Muncie are designed to meet the application needs of
either a pump or a motor. The all cast iron construction has 4 ports and a
roller bearing design. The pumps bi-rotational feature helps reduce inventory
requirements. It has a 2 bolt mount, 7/8 - 13 spline input shaft and O-ring
ports on the rear and sides of the pump. Sometimes used to replace 12-0306031
Miller car carrier hydraulic pump for increased flow.
$945.99
Miller Fitting Connector 3/8" MJ x 1/2" MB
This Hydraulic Fitting Connector from Miller Industries measures 3/8" MJ x 1/2"
MB. It is used on the Hydraulics Assembly of several Miller Car Carriers. These
Carriers include Century, Challenger, Champion, Holmes, and Vulcan. See the
features below for a full list of carriers and see the brochure tab for
breakdowns.
$3.59
PTO Allison Tee Lube 643 / 2000
Lube "T" fitting - required in the oil return cooling line to supply low
pressure to the idler shaft of the Chelsea PTOs.
$115.99
Pto, Muncie 109%, Sae"B" Flang
This is a Muncie PTO, 109%, dual action air shift with solenoid control, SAE
"B" Flange" typically used on wreckers 50 ton & over and on all rotators.
$4,218.99
Muncie Pto,Hot Shift Rh 117% Allison
This Muncie Hot Shift Power Take Off (PTO) is for installation on Allison 1000
and 2000 Series Automatic Transmissions. The PTO comes with all components
needed for installation. The PTO is set up to accept a directly mounted
hydraulic pump.
$2,888.99
Muncie PTO, 109%, SAE "B" Flange
This is a 109%, SAE "B" flange Muncie PTO with a 4" pilot and 14 T spline.
$4,085.99
Muncie Hydraulic Pump O Ring Port 15 Gal
This Hydraulic Pump from Muncie has a 15 gallon per minute flow at 1,000 RPM.
The PK Series Pumps from Muncie are designed to meet the application needs of
either a pump or a motor. The all cast iron construction has 4 ports and a
roller bearing design. The pumps bi-rotational feature helps reduce inventory
requirements. It has a 2 bolt mount, 7/8 - 13 spline input shaft and O-ring
ports on the rear and sides of the pump. This pump is used on Miller Car
Carriers 2003 and newer. This pump will also work on a Vulcan 984 also. This part has replaced part number
$937.99
Muncie Pump O-Ring Port 11 Gal
This Hydraulic Pump from Muncie has an 11 gallon per minute flow at 1,000 RPM.
The PK Series Pumps from Muncie are designed to meet the application needs of
either a pump, or a motor. The all cast iron construction has 4 ports and a
roller bearing design. It has a bi-rotational feature that helps reduce
inventory requirements. There is a 2 bolt mount, 7/8"-13 spline input shaft,
and O-Ring ports on the rear and sides of the pump. Use this pump on Miller
Carriers made in 2002 or older.
$912.99
B/A Products Hose Splice Kit
The B/A Products hose splice repair kits are perfect for temporary repairs on
the roadside. These splice kits will allow the operator to load and unload
while avoiding costly road service repairs.
$35.99
Miller Hose Vulcan 1/4" x 157"
This Hose Assembly from Miller Industries is used on the Wheel Lift Hydraulics
Assembly of Vulcan 810 Intruders and Holmes 440SL Wreckers. The hose is 1/4" x
157" long.
$105.99
Muncie 15 GPM Pump K Series
MUN PK Series hydraulic pump short front cover. 3.45 ci 7/8" 13 spline shaft SAE "B" flange straight thread side port left hand rotation w/Relief Valve.
$1,167.99
Muncie Pump O'Ring Port 17 GPM 1.5"
This Hydraulic Pump from Muncie has a 17 gallon per minute flow at 1,000 RPM.
The PK Series Pumps from Muncie are designed to meet the application needs of
either a pump or a motor. The all cast iron construction has 4 ports and a
roller bearing design. The pumps bi-rotational feature helps reduce inventory
requirements. It has a 2 bolt mount, 7/8 - 13 spline input shaft and O-ring
ports on the rear and sides of the pump. Sometimes used to replace 12-0306031
Miller car carrier hydraulic pump for increased flow.
$945.99
Miller Fitting Connector 3/8" MJ x 1/2" MB
This Hydraulic Fitting Connector from Miller Industries measures 3/8" MJ x 1/2"
MB. It is used on the Hydraulics Assembly of several Miller Car Carriers. These
Carriers include Century, Challenger, Champion, Holmes, and Vulcan. See the
features below for a full list of carriers and see the brochure tab for
breakdowns.
$3.59
PTO Allison Tee Lube 643 / 2000
Lube "T" fitting - required in the oil return cooling line to supply low
pressure to the idler shaft of the Chelsea PTOs.
$115.99
Pto, Muncie 109%, Sae"B" Flang
This is a Muncie PTO, 109%, dual action air shift with solenoid control, SAE
"B" Flange" typically used on wreckers 50 ton & over and on all rotators.
$4,218.99
Muncie Pto,Hot Shift Rh 117% Allison
This Muncie Hot Shift Power Take Off (PTO) is for installation on Allison 1000
and 2000 Series Automatic Transmissions. The PTO comes with all components
needed for installation. The PTO is set up to accept a directly mounted
hydraulic pump.
$2,888.99
Muncie PTO, 109%, SAE "B" Flange
This is a 109%, SAE "B" flange Muncie PTO with a 4" pilot and 14 T spline.
$4,085.99
Muncie Hydraulic Pump O Ring Port 15 Gal
This Hydraulic Pump from Muncie has a 15 gallon per minute flow at 1,000 RPM.
The PK Series Pumps from Muncie are designed to meet the application needs of
either a pump or a motor. The all cast iron construction has 4 ports and a
roller bearing design. The pumps bi-rotational feature helps reduce inventory
requirements. It has a 2 bolt mount, 7/8 - 13 spline input shaft and O-ring
ports on the rear and sides of the pump. This pump is used on Miller Car
Carriers 2003 and newer. This pump will also work on a Vulcan 984 also. This part has replaced part number
$937.99
Muncie Pump O-Ring Port 11 Gal
This Hydraulic Pump from Muncie has an 11 gallon per minute flow at 1,000 RPM.
The PK Series Pumps from Muncie are designed to meet the application needs of
either a pump, or a motor. The all cast iron construction has 4 ports and a
roller bearing design. It has a bi-rotational feature that helps reduce
inventory requirements. There is a 2 bolt mount, 7/8"-13 spline input shaft,
and O-Ring ports on the rear and sides of the pump. Use this pump on Miller
Carriers made in 2002 or older.
$912.99
B/A Products Hose Splice Kit
The B/A Products hose splice repair kits are perfect for temporary repairs on
the roadside. These splice kits will allow the operator to load and unload
while avoiding costly road service repairs.
$35.99
Miller Hose Vulcan 1/4" x 157"
This Hose Assembly from Miller Industries is used on the Wheel Lift Hydraulics
Assembly of Vulcan 810 Intruders and Holmes 440SL Wreckers. The hose is 1/4" x
157" long.
$105.99
