Parker Pilot Operated Check Valve

Muncie Tandem Hydraulic Pump 17 GPM

Note: Special Handling Fees Apply

$1,691.99

Muncie 15 GPM Pump K Series

MUN PK Series hydraulic pump short front cover. 3.45 ci 7/8" 13 spline shaft SAE "B" flange straight thread side port left hand rotation w/Relief Valve.

$1,167.99

Muncie Pump O'Ring Port 17 GPM 1.5"

This Hydraulic Pump from Muncie has a 17 gallon per minute flow at 1,000 RPM. The PK Series Pumps from Muncie are designed to meet the application needs of either a pump or a motor. The all cast iron construction has 4 ports and a roller bearing design. The pumps bi-rotational feature helps reduce inventory requirements. It has a 2 bolt mount, 7/8 - 13 spline input shaft and O-ring ports on the rear and sides of the pump. Sometimes used to replace 12-0306031 Miller car carrier hydraulic pump for increased flow.

$945.99

Miller Fitting Connector 3/8" MJ x 1/2" MB

This Hydraulic Fitting Connector from Miller Industries measures 3/8" MJ x 1/2" MB. It is used on the Hydraulics Assembly of several Miller Car Carriers. These Carriers include Century, Challenger, Champion, Holmes, and Vulcan. See the features below for a full list of carriers and see the brochure tab for breakdowns.

$3.59

PTO Allison Tee Lube 643 / 2000

Lube "T" fitting - required in the oil return cooling line to supply low pressure to the idler shaft of the Chelsea PTOs.

$115.99

Muncie Pto,Hot Shift Rh 117% Allison

This Muncie Hot Shift Power Take Off (PTO) is for installation on Allison 1000 and 2000 Series Automatic Transmissions. The PTO comes with all components needed for installation. The PTO is set up to accept a directly mounted hydraulic pump.

$2,888.99

Pto, Muncie 109%, Sae"B" Flang

This is a Muncie PTO, 109%, dual action air shift with solenoid control, SAE "B" Flange" typically used on wreckers 50 ton & over and on all rotators.

$4,218.99

Muncie PTO, 109%, SAE "B" Flange

This is a 109%, SAE "B" flange Muncie PTO with a 4" pilot and 14 T spline.

$4,085.99

Muncie PTO, Hot Shift LH 117%, 1"-15SPL

This is a PTO, hot shift LH 117%, 1"-15SPL.

$2,959.99

Miller Hose Hydraulic Two Wire H425-6 3/8"

3/8" H425-6 Hydraulic Hose

$7.99

Muncie Hydraulic Pump O Ring Port 15 Gal

This Hydraulic Pump from Muncie has a 15 gallon per minute flow at 1,000 RPM. The PK Series Pumps from Muncie are designed to meet the application needs of either a pump or a motor. The all cast iron construction has 4 ports and a roller bearing design. The pumps bi-rotational feature helps reduce inventory requirements. It has a 2 bolt mount, 7/8 - 13 spline input shaft and O-ring ports on the rear and sides of the pump. This pump is used on Miller Car Carriers 2003 and newer. This pump will also work on a Vulcan 984 also. This part has replaced part number

$937.99

Muncie Pto,Hot Shift Lh 117% Allison

$2,888.99

Muncie Pump O-Ring Port 11 Gal

This Hydraulic Pump from Muncie has an 11 gallon per minute flow at 1,000 RPM. The PK Series Pumps from Muncie are designed to meet the application needs of either a pump, or a motor. The all cast iron construction has 4 ports and a roller bearing design. It has a bi-rotational feature that helps reduce inventory requirements. There is a 2 bolt mount, 7/8"-13 spline input shaft, and O-Ring ports on the rear and sides of the pump. Use this pump on Miller Carriers made in 2002 or older.

$912.99

B/A Products Hose Splice Kit

The B/A Products hose splice repair kits are perfect for temporary repairs on the roadside. These splice kits will allow the operator to load and unload while avoiding costly road service repairs.

$35.99

Muncie Tandem Hydraulic Pump- 13 GPM

This is a Muncie Tandem Hydrulic Pump (13 GPM)

$1,655.99

Miller Hose Vulcan 1/4" x 157"

This Hose Assembly from Miller Industries is used on the Wheel Lift Hydraulics Assembly of Vulcan 810 Intruders and Holmes 440SL Wreckers. The hose is 1/4" x 157" long.

$105.99

Muncie Tandem Hydraulic Pump 17 GPM

Note: Special Handling Fees Apply

$1,691.99

Muncie 15 GPM Pump K Series

MUN PK Series hydraulic pump short front cover. 3.45 ci 7/8" 13 spline shaft SAE "B" flange straight thread side port left hand rotation w/Relief Valve.

$1,167.99

Muncie Pump O'Ring Port 17 GPM 1.5"

This Hydraulic Pump from Muncie has a 17 gallon per minute flow at 1,000 RPM. The PK Series Pumps from Muncie are designed to meet the application needs of either a pump or a motor. The all cast iron construction has 4 ports and a roller bearing design. The pumps bi-rotational feature helps reduce inventory requirements. It has a 2 bolt mount, 7/8 - 13 spline input shaft and O-ring ports on the rear and sides of the pump. Sometimes used to replace 12-0306031 Miller car carrier hydraulic pump for increased flow.

$945.99

Miller Fitting Connector 3/8" MJ x 1/2" MB

This Hydraulic Fitting Connector from Miller Industries measures 3/8" MJ x 1/2" MB. It is used on the Hydraulics Assembly of several Miller Car Carriers. These Carriers include Century, Challenger, Champion, Holmes, and Vulcan. See the features below for a full list of carriers and see the brochure tab for breakdowns.

$3.59

PTO Allison Tee Lube 643 / 2000

Lube "T" fitting - required in the oil return cooling line to supply low pressure to the idler shaft of the Chelsea PTOs.

$115.99

Muncie Pto,Hot Shift Rh 117% Allison

This Muncie Hot Shift Power Take Off (PTO) is for installation on Allison 1000 and 2000 Series Automatic Transmissions. The PTO comes with all components needed for installation. The PTO is set up to accept a directly mounted hydraulic pump.

$2,888.99

Pto, Muncie 109%, Sae"B" Flang

This is a Muncie PTO, 109%, dual action air shift with solenoid control, SAE "B" Flange" typically used on wreckers 50 ton & over and on all rotators.

$4,218.99

Muncie PTO, 109%, SAE "B" Flange

This is a 109%, SAE "B" flange Muncie PTO with a 4" pilot and 14 T spline.

$4,085.99

Muncie PTO, Hot Shift LH 117%, 1"-15SPL

This is a PTO, hot shift LH 117%, 1"-15SPL.

$2,959.99

Miller Hose Hydraulic Two Wire H425-6 3/8"

3/8" H425-6 Hydraulic Hose

$7.99

Muncie Hydraulic Pump O Ring Port 15 Gal

This Hydraulic Pump from Muncie has a 15 gallon per minute flow at 1,000 RPM. The PK Series Pumps from Muncie are designed to meet the application needs of either a pump or a motor. The all cast iron construction has 4 ports and a roller bearing design. The pumps bi-rotational feature helps reduce inventory requirements. It has a 2 bolt mount, 7/8 - 13 spline input shaft and O-ring ports on the rear and sides of the pump. This pump is used on Miller Car Carriers 2003 and newer. This pump will also work on a Vulcan 984 also. This part has replaced part number

$937.99

Muncie Pto,Hot Shift Lh 117% Allison

$2,888.99

Muncie Pump O-Ring Port 11 Gal

This Hydraulic Pump from Muncie has an 11 gallon per minute flow at 1,000 RPM. The PK Series Pumps from Muncie are designed to meet the application needs of either a pump, or a motor. The all cast iron construction has 4 ports and a roller bearing design. It has a bi-rotational feature that helps reduce inventory requirements. There is a 2 bolt mount, 7/8"-13 spline input shaft, and O-Ring ports on the rear and sides of the pump. Use this pump on Miller Carriers made in 2002 or older.

$912.99