0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
Temflex Vinyl Insulating Electrical Tape
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
$2.99
In The Ditch Galvanized Steel Trash Cans w/ Lids
In The Ditch now has Galvanized Steel Trash Cans. Made from galvanized steel, these trash cans are guaranteed to last for years. You can choose from a 6 gallon trash can or a 4 gallon trash can. Each of these sizes comes with a lid included. The 4 gallon trash can and lid can be used to replace miller part number 124002700.
$37.49
–
$41.59
RimSling Spliced Eye Synthetic Recovery Slings
Make your recoveries easier with The RimSling! This synthetic rope sling is
designed slimmer yet has a higher . The RimSling has a protective Cordura
Sleeve over the entire sling giving it maximum protection. Also, it has a
special braid guard at the center of the sling providing extended life. A 6"
sling eye is located on either end of the sling. The RimSling is also Made in
the USA!
$129.99
–
$769.99
Zips Detent Kit Century 5030 and Up
This detent kit for Century 5030 wreckers and up helps hold the crossbar
straight when the underlift is not loaded. Fits Century 5030, 5130, 5230, 7035,
9055 and SDU models.
$47.99
All-Grip Winch Cable Thimble
Please Note: Product Discontinued - ALL SALES FINAL!
Discontinued items are not eligible for return. View Returns Policy
This is a winch cable thimble made of hot-dipped and galvanized steel from All-Grip.
Discontinued items are not eligible for return. View Returns Policy
This is a winch cable thimble made of hot-dipped and galvanized steel from All-Grip.
- 4 options
- Hot-dipped and galvanized steel
$1.99
–
$9.99
Zip's G80 Bulk Chain
Grade 80 bulk chain from Zip's is sold by the foot and available in six sizes. The chain is made from alloy steel and protected by a
black coating. The chain meets or exceeds NACM, ASTM and OSHA specifications and is approved for overhead lifting. See the drop-dow
n menu for available sizes and working load limits.
$4.99
–
$12.99
Miller Pin Pivot
This is a replacement Pivot Pin for Miller Industries Trucks. This part can be used to replace Part Number 12-0802136.
$291.99
Century Wreckers Bushing 3.75"
This Bushing from Miller Industries is used on the Wheel Lift and Under Lift
Assembly of several Miller Wreckers. These include Century, Challenger and
Holmes Wreckers. The Bushing measures 3.75" tall with an outside diameter of 4"
and an inside diameter of 3.5", giving it an overall thickness of .25". Please
see the features below for a list of wreckers and see the brochure tab for
breakdowns.
$166.99
Miller Detent Ball, 1-3/16"
This 1-3/16" steel Detent Ball from Miller Industries is used on the assembly
of Century Car Carriers and Wreckers.
$14.69
Century Slide Pad 7" x 3" x 3/8"
This Slide Pad from Miller Industries is used in the wheel lift, underlift, and
tower assemblies of several Century, Challenger, and Holmes wreckers. This
slide pad measures 7" long, 3" tall, and 3/8" wide.
$17.79
Century Spacer Pad Underlift Heavy Duty Wreckers
This is a replacement spacer pad that bolts to the underside of the underlift
boom to help the boom slide in and out efficiently. This pad is used on
Century and Challenger heavy duty wreckers by Miller Industries. To view
specific models this pad fits see Features below. To view the part schematics
click on the Brochure tab.
$43.99
Tork Advanced ShopMax Centerfeed Shop Towels
Tork Advanced ShopMax Wiper 450 Center-feed shop towels are highly absorbent, offering excellent wipe-dry capabilities. Their strong construction offers durability and the self-dispensing pop-up box offers controlled dispensing. They contain 85% paper content (60% recycled, 40% postindustrial) and 15% synthetic emulsion. Sold in a box of 200.
$21.99
Miller Screw, Button Head, 3/8"-24 x 5/8"
This Button Head Screw from Miller Industries is used to screw the stop plates
and slide pads onto boom weldments in many Miller Wrecker assemblies. These
assemblies include wheel lift, SDU, underlift, and tower assemblies on Century,
Challenger, and Holmes wreckers. The screw measures 3/8" diameter x 5/8" long
with a thread size of 24. Please see the brochure tab for a list of breakdowns.
$0.39
Related products
Chevron Pin and Link Assembly
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
$33.99
Miller 6.5" Thrust Washer Century / Challenger / Holmes
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
$12.99
Miller Inner Boom Bushing
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
$86.99
Handle Bracket
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
$39.99
Ramsey Seal Kit
This gasket and seal kit is for the H-200 series Ramsey winch with the " keyhole style " worm gear housing cover.
$73.99
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Miller Grommet, Rubber, Century and Vulcan Wreckers
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
$2.99
Washer, Flat 5/16" Stainless Steel 18-8
Fastenal 5/16" 18-8 stainless steel small OD flat washer.
$0.09
Miller Composite Bell Crank
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
$13.29
Chevron Pin and Link Assembly
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
$33.99
Miller 6.5" Thrust Washer Century / Challenger / Holmes
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
$12.99
Miller Inner Boom Bushing
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
$86.99
Handle Bracket
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
$39.99
Ramsey Seal Kit
This gasket and seal kit is for the H-200 series Ramsey winch with the " keyhole style " worm gear housing cover.
$73.99
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Miller Grommet, Rubber, Century and Vulcan Wreckers
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
$2.99
Washer, Flat 5/16" Stainless Steel 18-8
Fastenal 5/16" 18-8 stainless steel small OD flat washer.
$0.09
Miller Composite Bell Crank
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
$13.29
