Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
This Mud Flap Mounting Angle from Miller Industries is assembled on the right
side of Century, Challenger, Champion, Eagle and Holmes Wreckers. Please see
the features below for a list of wreckers and see the brochure tab for
breakdown schematics.
This Pivot Pin Kit so for a Century Express 300 Series Wheel Lift. The kit
includes one 12-0803916 Pivot Pin, one 12-0306748 Pivot Pin Bushing, two
12-0710092 Thrust Washers, two 12-0400637 Pivot Pin Retaining Bolts, two
12-0400428 Lock Nuts and one 80013 Grease Zerk.
Pivot Pin Kit, Century Formula I, Holmes DFT-400, and Challenger I-400 wheel
lift. Design built after March 1996 up to August 2000. Includes (1) 12-0801073
Pivot Pin, (1) 12-0303403 Pivot Pin Bushing, (2) 12-0303402 Thrust Washers, and
(2) 12-0701956 Pivot Pin Retaining Bolts.
This Detent Kit from Zip's will help hold the crossbar straight when it is not
loaded. It fits Century and Champion Wheel Lifts. The kit includes a 12-0301398 ball, 12-0301197 spring and 12-0702546 spacer.
Pivot Pin Kit, Century Formula I, Holmes DFT-400, and Challenger I-400 wheel
lift. Latest design built after August 2000. Includes (1) 12-0801073 Pivot Pin,
(1) 12-0306879 Pivot Pin Bushing, (2) 12-0303402 Thrust Washers, and (2)
12-0701956 Pivot Pin Retaining Bolts.
This is a Pivot Pin Kit for a Century Formula I, Holmes DFT-400, Challenger
I-400 (1996 and older), and Century/Champion 10 Series car carrier wheel lifts
('01 and older). This kit includes one
This Pivot Pin Kit is for use with Vulcan 804, 831, 860, 870 and 880 Wrecker
Wheel Lifts. This kit also fits all Vulcan Car Carrier Wheel Lifts and
Century/Champion 10 Series Car Carrier Wheel Lifts built in 2002 or newer with
a Vulcan style crossbar. This Kit has a 1-1/4" diameter pivot pin that is held
in place with an allen head bolt and washer on the top.
This Detent Kit from Zip's will help to keep the crossbar straight. It fits
Vulcan style crossbars, Vulcan Car Carrier Wheel Lifts, and Century Car Carrier
Wheel Lifts with Vulcan crossbars. The kit includes a ball, spring, washers,
and a threaded plug.
This is a Jerr-Dan Wheel Lift Pivot Pin Bushing. It is used on both wreckers
and car carriers. This bushing is for greaseable wheel lifts. The dimensions
of this bushing are 3" diameter x 2.75".
This is a Bed Pivot Pin from Miller Industries that is used on the bed of car
carriers. It measures 38" long and has a diameter of 1-1/4". This Pivot Pin is
used in the tilt frame assembly of many Century, Challenger, Champion, Holmes,
and Vulcan Car Carriers. Please see the brochure tab for a list of breakdowns.
This Pivot Pin Kit so for a Century Express 300 Series Wheel Lift. The kit
includes one 12-0803916 Pivot Pin, one 12-0306748 Pivot Pin Bushing, two
12-0710092 Thrust Washers, two 12-0400637 Pivot Pin Retaining Bolts, two
12-0400428 Lock Nuts and one 80013 Grease Zerk.
Pivot Pin Kit, Century Formula I, Holmes DFT-400, and Challenger I-400 wheel
lift. Design built after March 1996 up to August 2000. Includes (1) 12-0801073
Pivot Pin, (1) 12-0303403 Pivot Pin Bushing, (2) 12-0303402 Thrust Washers, and
(2) 12-0701956 Pivot Pin Retaining Bolts.
This Detent Kit from Zip's will help hold the crossbar straight when it is not
loaded. It fits Century and Champion Wheel Lifts. The kit includes a 12-0301398 ball, 12-0301197 spring and 12-0702546 spacer.
Pivot Pin Kit, Century Formula I, Holmes DFT-400, and Challenger I-400 wheel
lift. Latest design built after August 2000. Includes (1) 12-0801073 Pivot Pin,
(1) 12-0306879 Pivot Pin Bushing, (2) 12-0303402 Thrust Washers, and (2)
12-0701956 Pivot Pin Retaining Bolts.
This is a Pivot Pin Kit for a Century Formula I, Holmes DFT-400, Challenger
I-400 (1996 and older), and Century/Champion 10 Series car carrier wheel lifts
('01 and older). This kit includes one
This Pivot Pin Kit is for use with Vulcan 804, 831, 860, 870 and 880 Wrecker
Wheel Lifts. This kit also fits all Vulcan Car Carrier Wheel Lifts and
Century/Champion 10 Series Car Carrier Wheel Lifts built in 2002 or newer with
a Vulcan style crossbar. This Kit has a 1-1/4" diameter pivot pin that is held
in place with an allen head bolt and washer on the top.
This Detent Kit from Zip's will help to keep the crossbar straight. It fits
Vulcan style crossbars, Vulcan Car Carrier Wheel Lifts, and Century Car Carrier
Wheel Lifts with Vulcan crossbars. The kit includes a ball, spring, washers,
and a threaded plug.
This is a Jerr-Dan Wheel Lift Pivot Pin Bushing. It is used on both wreckers
and car carriers. This bushing is for greaseable wheel lifts. The dimensions
of this bushing are 3" diameter x 2.75".
This is a Bed Pivot Pin from Miller Industries that is used on the bed of car
carriers. It measures 38" long and has a diameter of 1-1/4". This Pivot Pin is
used in the tilt frame assembly of many Century, Challenger, Champion, Holmes,
and Vulcan Car Carriers. Please see the brochure tab for a list of breakdowns.