Search | Zip's

85 Results Result For "vulcan 810"

Sort by

Vulcan 810 Motorcycle Loader - Blemished

Unit was never installed, has scratches and can not sell as new The Condor Towing Self-Loader is specially designed for wreckers self-loaders, to use in transporting all types and sizes of motorcycles safely, securely and efficiently, in all kinds of weather and on all kinds of surfaces. This easy to use kit incorporates our patented fully adjustable wheel locking mechanism to support any bike in an upright and secure position so it is ready to be tied down. The Towing Self-Loader provides piece of mind for the operator and the customer. The Condor Towing Self-Loader can be quickly removed and its components easily fit into any self-loader toolbox. Also Adapts for use with the following: Century 312, Dynamic 601, Dynamic 701, Jerr-Dan MPL, Vulcan 810 Intruder, Chevron 401 Outlaw, Century 301 Express, Chevron 408 Renegade, Century Midnight Express, Recovery Solutions 400 Series, Recovery Solutions 500 Series.

Self Locking
Easy load and unload
Supports all motorcycles securely upright
Accommodates front and rear tires
Works on all self loaders
Two piece assembly fits easily into any self loader toolbox
Unit breaks down for easy storage
SC-2000 section: 9" wide X 25" long X 12" high
Ramp section 9.5" wide X 26" long X 5' high

$391.99

Vulcan 810 Composite LH White Door Assembly

LH door assembly for a Vulcan 810. uses 12-03004724 hinge assembly

$1,059.99

Miller Trailer Hitch Bracket Assembly, Vulcan 810, Holmes 440SL

This is a replacement trailer hitch bracket assembly by Miller Industries. This bracket fits the Vulcan 810 wrecker and the Holmes 440SL from 2007 and newer.

$450.99

Miller Industries Replacement Handheld Remote for Vulcan 810/812 Wreckers

This is a replacement handheld-remote used on newer style Vulcan 810/812 Wreckers. This remote is used with units that have proximity switches for negative tilt and boom functions.

$1,889.99

Condor Motorcycle Loader for Wreckers

The Condor Towing Self-Loader is specially designed for wreckers self-loaders, to use in transporting all types and sizes of motorcycles safely, securely and efficiently, in all kinds of weather and on all kinds of surfaces. This easy to use kit incorporates our patented fully adjustable wheel locking mechanism to support any bike in an upright and secure position so it is ready to be tied down. The Towing Self-Loader provides piece of mind for the operator and the customer. The Condor Towing Self-Loader can be quickly removed and its components easily fit into any self-loader toolbox. Also Adapts for use with the following: Century 312, Dynamic 601, Dynamic 701, Jerr-Dan MPL, Vulcan 810 Intruder, Chevron 401 Outlaw, Century 301 Express, Chevron 408 Renegade, Century Midnight Express, Recovery Solutions 400 Series, Recovery Solutions 500 Series.

$434.99

Zip's Custom Stainless Steel Camera Guard 810 Vulcan

This Zip's Custom camera guard is used on the Vulcan 810 wrecker. This stainless steel camera guard helps prevent any damage to your rear camera on your wrecker. New design stainless steel does not need to be painted.

$80.00

Miller 88" x 24" Aluminum Saddle Box

Aluminum Crossover Tunnel Toolbox, 24" Wide x 88" Long. For Installation With ACentury 211, Century Midnight, Century Express, Century FI 411/412, CenturyF6500 602/612, Vulcan 810, Vulcan 807, Vulcan 881/882, and Vulcan 892/894Wrecker Units. Installation Includes A Junction Box For Connection Of The TruckChassis Wiring With The Body. Optional Accessories (light bars, Work Lights,Hook Up Lights, And Toolbox Lights) Will Also Be Connected To Their RespectiveSwitch Circuits Using The Junction Box Located In The Tunnel Box. Painting OfThe Tunnel Box Includes The Sanding Of The Factory Surface, Apply EpoxyPrimers, and Color Coating Of PPG Poly Eurothane Enamel.

$6,372.99

Miller Tunnel Box, Aluminum, 36" x 94"

Aluminum Crossover Tunnel Toolbox. 36"w x 94"L. For Installation with a Century 211, Century Express, Century F1 411/412, Century F6500 602/612, Vulcan 810, Vulcan 807, Vulcan 881/882, and Vulcan 892/894 wrecker units. Installation includes a junction box for the connection of the truck chassis wiring with the body. Optional accessories will also be connected to their respective switch circuits using the junction box located in the tunnel box. Painting of the tunnel box includes the sanding of the factory surface, apply epoxy primers, and color coating of PPG Poly Urethane Enamel.

$10,805.99

Miller 94" x 24" Aluminum Saddle Box

Aluminum Crossover Tunnel Toolbox, 24" Wide x 94" Long. For Installation With A Century 211, Century Midnight, Century Express, Century FI 411/412, Century F6500 602/612, Vulcan 810, Vulcan 807, Vulcan 881/882, and Vulcan 892/894 Wrecker Units. Installation Includes A Junction Box For Connection Of The Truck Chassis Wiring With The Body. Optional Accessories (Light bars, Work Lights, Hook Up Lights, And Toolbox Lights) Will Also Be Connected To Their Respective Switch Circuits Using The Junction Box Located In The Tunnel Box. Painting Of The Tunnel Box Includes The Sanding Of The Factory Surface, Apply Epoxy Primers, and Color Coating Of PPG Poly Urethane Enamel.

$6,372.99

Zip's Custom Dolly Axle Storage Brackets

These are custom made dolly axle storage brackets that are used to store your dolly axles on the body of your light duty wrecker. These are made specifically for Vulcan 810, 812, and Century 312 Wreckers.

$469.99

Zip's Steel Wheel Lift L-Arm - Century, Holmes and Vulcan Wreckers

Note: Special Handling Fees Apply for Specific Items

L-shaped Wheel Lift Arms from Zip's are made from welded steel tube and are designed to replace either the driver side or passenger side of an auto-loading wheel lift on light-duty wreckers from Miller Industries. Powder-coated black for corrosion resistance, the steel composition ensures the arms can withstand the weight and stress of lifting heavy vehicles without compromising their structural integrity.

The design and construction of these wheel lift arms offer stability and leverage during the lifting process. The pivoting end is reinforced to eliminate any sag while clamping the tire, and the L-shape design creates a tight and secure hold on the tires. A locking mechanism prevents accidental release and ensures the safety of the towed vehicle.

Sold individually, these wheel lift arms are designed to fit various tow truck models, including Century Modular, Century Express, Holmes and Vulcan.This compatibility ensures a seamless integration into different towing setups. See the fitment list below to find the specific models of auto-loading wreckers for these wheel lift arms.

Steel tube construction
Reinforce pivot point
Powder-coated black for corrosion resistance
Passenger or driver side positioning
L-shape design
Locking mechanism
Sold individually

Fitment:

2010 - Current Century Modular Midnight Express
2000 - Current Century Midnight Express
2007 - Current Century Express 300 Series Modular
2009 - Current Holmes 440SL
2007 - Current Vulcan Modular 807
2000 - Current Vulcan 810 Intruder

$569.99

Zip's Dolly Mounts for Auto Load Wreckers

These quality tow dolly mounts from Zip's were specifically designed to be installed on any self-loading wrecker built by Miller Industries. Select from two different item numbers to accommodate either Collins or In the Ditch branded dolly sets. Mounted on the rear slope of the wrecker body for quick and ergonomically-friendly access to the dolly, these brackets are perfect for the serious light duty towing operator. We try to make your life a little easier and safer on the road!

$159.99 – $184.99

Miller Hydraulic Tank Breather Cap, 3/4"

This is a replacement 3/4" hydraulic tank breather cap for Miller Light and Medium Duty wreckers. See Features to see what models this will all fit. This part can be used to replace Part Number, 9018113.

$70.99

Miller Lenz Hydraulic Replacement Element 10 Microns 25 PSI

This is a replacement filter element for part number 12-0311288 filter assembly and can be used in place of part number 9018309. The filter bypass is in the element. The filtration media in this element is 10 Micron Cellulose with a dirt holding capacity of 11. This element has a 3/4" port size and a 25 PSI bypass. This is the new style filter and will fit the filter assemblies found on Century, Chevron Holmes and Vulcan Wreckers and Car Carriers.

$48.39

Coil,12V Hydraforce,810 Vulcan

This is a 810 Vulcan 12V hydraforce coil.

$95.99

Miller Swing Arm Style Dolly Mount

Swing Arm Style Dolly Mount Bracket-Mounts on the rear tailgate section next to the wheel lift boom allowing for better rear visibility and freeing up the upper deck area for mounting additional equipment such as fuel cans or air tanks. The swing arm is released by a camlock that allows the dollies to swing past the side or tail section for better access and the lower mounting height making them easier to lift on and off. Sold as a pair, so you get 2 dolly mounts. One for each side of your wrecker.

$1,474.99

Valve-Mate II Mobile Control Systems Remote Control 16 Function

"Valve-Mate II" radio controls are pre-wired, tested, and easy to install. The Valve-Mate attaches directly to the electrical plug of the existing hydraulic control valve and does not alter your hydraulic system. This system is specific for the Century and Vulcan auto load Midnight Express and 810/812 wrecker. Lifetime warranty on the electronic radio system.

$1,824.99

Miller Vulcan 819 / 821 Seal Kit W/L Extension and Bed Lift Cylinder

Seal Kit for Vulcan 891 and 821 Series Car Carrier Wheel-Lift Extend and Bed Lift Cylinders. Services #814010800, #814010700, #814011500, #810411100 50" Pin to Pin cylinder and 814011500 60.75" Pin to Pin Cylinders. Fits only Pre 1998 Production early carriers with serial numbers begininng in 5 or 8. Please remember that seal kits may fit different cylinders of the same diameter. See the chart below for more information.

$137.99

Seal Kit For Vulcan Made Lift

cylinder# 810710000 built by Holmac

$190.99

Miller Shelf Kit Composite 810/807

Shelf Kit for FI & 6500 Century as well as Vulcan 880/890 Series.

$310.99

Zips Wheel Lift Wear Pad Kit Century Formula I Challenger I-400 and Holmes DFT 400

Wear Pad Kit, Century Formula I, Holmes DFT-400, and Challenger I-400 wheel lifts. Kit includes stinger wear pads, and extend cylinder pins & hardware.

$99.99

Vulcan 810 Flange Bearing

This is a flange bearing for the outer stinger weldment on the Vulcan 810 by Miller Industries. See Features for related parts and brochures for reference chart.

$48.39

Miller Vulcan 810 and Holmes 440SL Hose Tension Shield

This is a hydraulic hose tension cover plate on the main boom of a Vulcan 810 and Holmes 440SL by Miller Industries. See Brochures for a reference chart and Features for related parts.

$171.99

Miller Stop Block Vulcan 810

This is a four position stop block located on the back inside of the main boom of the Vulcan 810 by Miller Industries. See Brochures for a reference chart.

$16.09

Miller Stinger Pivot Pin, Vulcan 810/ Holmes 440SL

This is the pivot pin on the bottom of the boom of the Vulcan 810 and Holmes 440SL to be attached to the wheel lift stinger by Miller Industries. See Brochures for reference chart and Features for related parts.

$107.99

Miller Outer Stinger Weldment, Vulcan 810

This is the outer stinger weldment for the Vulcan 810. See features for related parts and brochures for reference chart.

$2,656.99

Miller Winch Spacer Plate Vulcan 810

This is a spacer plate for the winch on the top of the main boom of the Vulcan 810 by Miller Industries. See Brochures for a reference chart.

$18.99

Century 300 Series / Holmes 440SL / Vulcan 810 Hose Tensioner Spring

This is a hydraulic hose tensioner spring for a Vulcan 810, Century 300 Series, and Holmes 440 Series by Miller Industries. See Brochures for a reference chart and Features for related parts.

$38.99

Miller Wheel Lift Hose Shield Vulcan 810

This is a hydraulic hose shield on the wheel lift for a Vulcan 810 by Miller Industries. See Brochures for reference Chart and Features for related parts.

$228.99

Miller Century 200 / 300 Series and Vulcan 810 Tie Down Strap 15"

This is a tie down strap for the cable to attach to on the Vulcan 810 and Century 211/212/311/312 by Miller Industries. This 15" rubber bungee strap will help save your boom and wheel lift from paint chips by holding your cable hook in place. See Brochures for a reference chart.

$32.09

Miller Crossbar Assembly Sleeve, Century Midnight Express and Vulcan 810 Intruder

This is a replacement sleeve for the crossbar assembly on a Century Midnight Express and Vulcan 810 Intruder light duty wreckers by Miller Industries.

$35.59

Miller Rod End Wheel Lift Tilt Cylinder Pin Vulcan 810 Intruder

This is the Wheel Lift Tilt Cylinder Lower Pin for the Vulcan 810 Intruder light duty wrecker by Miller Industries. This pin goes through the rod end of the tilt cylinder. This pin attaches the wheel lift tilt cylinder to the wheel lift outer boom weldment. To view the part schematic click on the Brochure tab.

$89.99

Miller Inner Stinger, Century 300 Series, Challenger 4300, Vulcan 810

This is the Inner Stinger Boom Weldment for the Wheel Lift on a Century 300 Express Series, Challenger 4300 Express, and Vulcan 810 Intruder by Miller Industries. See Brochures for part schematics and Features for related parts and to see what this will fit.

$1,802.99

Century Stop Pad Century 300 Series / Midnight Express Challenger 4300 Series and Vulcan 810

This Stop Pad from Miller Industries is used in the boom assembly of Century, and Challenger Wreckers. It is also used in the wheel lift assembly of Vulcan 810 Intruder Wreckers. The pad measures 3-3/4" in diameter, 1" tall, and 1/8" thick. Please see the brochure tab for a list of breakdowns.

$28.79

Miller Main Boom, 810

This is the main boom of a Vulcan 810 by Miller Industries. See Brochures for a reference chart and Features for related parts.

$5,137.99

Miller Boom Lift Cylinder 3.5" Bore x 10.44" Stroke Holmes Vulcan

This is the Wrecker Boom Lift Cylinder on the Holmes 440SL, Vulcan 810 Intruder, Vulcan 812 Intruder, and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This cylinder has a 3.5" bore with a 10.44" stroke. This lift cylinder connects to the subframe weldment and to the outer wrecker boom weldment. This is the cylinder that raises the boom of the wrecker up and down. This lift cylinder is also referred to as the boom elevation cylinder. To see which specific models this cylinder will fit please see Features below. To view part schematics click on the Brochure tab.

$1,330.99

Miller 5-Spool Parker Electrical Control Valve

This is a replacement 5 Spool Parker Control Valve for the Vulcan 810 Auto-Load and the Century Modular Midnight Express light duty wreckers by Miller Industries. To view part schematics please click on the documents tab. This part can be used to replace part number 12-0306776. Customer will need to purchase quantity 11 of Part #

$3,203.99

Remote-Handheld 5-Sw 22 Ft-810

This is a replacement remote for older and early 2000's Vulcan 810 wreckers.

$1,096.99

Miller Rubber Stop Century 300 Series and Vulcan 807 / 810

This Rubber Stop from Miller Industries is used on the boom assembly of Vulcan 810 Intruders, Vulcan 807R and Century 301, 301M, 311 and 312 Wreckers.

$45.29

Miller Hinge Pin Weldment

This Hinge Pin Weldment from Miller Industries is used on the Body Assembly of Vulcan 810 Intruder Wreckers. See the brochure tab for breakdown.

$56.99

Miller Base End Boom Lift Cylinder Pin Holmes Vulcan

This is the Wrecker Boom Lift Cylinder Pin for the Holmes 440SL, Vulcan 805, and Vulcan 810 Series light duty wreckers by Miller Industries. This pin goes through the base end of the lift cylinder. This pin connects the boom lift cylinder to the subframe weldment. To view part schematics click on the Brochure tab.

$73.99

Miller Hose Vulcan 1/4" x 157"

This Hose Assembly from Miller Industries is used on the Wheel Lift Hydraulics Assembly of Vulcan 810 Intruders and Holmes 440SL Wreckers. The hose is 1/4" x 157" long.

$120.99

Miller Shim Washer, 1/8", Century and Vulcan Wreckers

This Shim Washer from Miller Industries is used on the assembly of Century 312 Wreckers, and Vulcan 810 and V30 Wreckers. This washer has an inside diameter of 1-1/2", an outside diameter of 2-1/8", and a thickness of 1/8". Please see the features below for a list of wreckers and see the brochure tab for breakdowns.

$11.99

Miller Rod End Wheel Lift Tilt Cylinder Pin Vulcan 812 and 810

This is the Wheel Lift Tilt Cylinder Lower Pin for the Vulcan 812 Intruder and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This pin goes through the rod end of the tilt cylinder. This pin attaches the tilt cylinder to the wheel lift outer boom weldment. To see which specific wrecker models this pin will fit please see Features below. To view the part schematics click on the Brochure tab.

$96.99

Miller Wheel Lift Outer Tube Slide Pad 810 / Midnight Express

This is the outer tube slide pad for the bottom, inside of the wheel lift on the Vulcan 810 Intruders & Century Midnight Express. See Brochures for reference chart. Each pad sold separately.

$18.39

Miller Wheel Lift Fold Cylinder 4" Bore x 19.5" Stroke Vulcan 812 and 810

This is the Wheel Lift Fold Cylinder for the Wheel Lift on the Vulcan 812 Intruder and Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This cylinder has a 4" bore with a 19.5" stroke. This cylinder attaches to the wrecker outer boom weldment and to the wheel lift outer boom weldment. This is the cylinder that folds the wheel lift up against the boom of the wrecker for travel. To see which specific wrecker models this cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.

$2,112.99

Miller Wheel Lift Fold Cylinder 2.5" Century Holmes Vulcan

This is a 2.5" Wheel Lift Fold Cylinder on Century Modular Midnight Express, Holmes 440SL and Vulcan 810 Intruder light duty wreckers. To view specific wrecker models please see Features below. To view part schematics click on the Brochure tab. This part can be used to replace Part Number, 810700000.

$1,098.99

Miller Rod End Boom Lift Cylinder Pin Holmes Vulcan

This is the Wrecker Boom Lift Cylinder Pin on the Holmes 440SL, Vulcan 812 Intruder, and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This pin goes through the rod end of the lift cylinder. This pin connects the boom lift cylinder to the main boom of the wrecker. To see which specific models this pin will fit see Features below. To view part schematics click on the Brochure tab.

$101.99

Miller Retaining Angle for Hydraulic Hoses

This is a retaining angle for hydraulic hoses at the bottom of the main boom of the Vulcan 810 and Holmes 440SL by Miller Industries.

$19.69

Miller Wheel Lift Tilt Cylinder Upper Pin Century Holmes Vulcan

This is the Upper Pin for the Wheel Lift Tilt Cylinder on Century Modular Midnight Express, Holmes 440SL and Vulcan 810 Intruder light duty wreckers by Miller Industries. This pin is used to connect the tilt cylinder to the subframe assembly. To view the specific wrecker models see Features below. To view part schematics click on the Brochures tab.

$70.99

Miller Rod End Boom Lift Cylinder Pin Vulcan 805 / 806 / 807 / 810

This is the Wrecker Boom Lift Cylinder Upper Pin for the Vulcan 805, Vulcan 806, Vulcan 807 Auto Grip, and Vulcan 810 Intruder light duty wreckers by Miller Industries. This pin goes through the rod end of the lift cylinder. This pin connects the lift cylinder to the outer wrecker boom weldment. To see which specific wrecker models this cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.

$98.99

Miller Swing L-Arm Cylinder Clevis Pin 5/8" x 1.5" Century Holmes Vulcan

This is the clevis pin for the Swing L-Arm cylinder on the Century Express 300 Series, Holmes 440SL and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This clevis pin measures 5/8" x 1.5". This pin is used to connect the swing L-arm cylinder to the swing L-arm. To see which specific models this pin fits please see Features below. To view part schematics click on the Brochure tab.

$11.99

Miller Flange Bushing, 1/2" x 5/8" x 1/2", Vulcan

This 1/2" x 5/8" x 1/2" Flange Bushing from Miller Industries is used on the Body Assembly of Vulcan 810 Intruder Wreckers. See the brochure tab for breakdowns.

$4.69

Century Vertical Boom Guide Pad 300 Series and Vulcan 800 Series

This is a Vertical Boom Guide pad for Century 300 Express Series, Century Modular 211, Vulcan Modular 804, Vulcan Modular 806, Vulcan Modular 807, Vulcan 805, Vulcan 810 Intruder, and Vulcan 812 Intruder by Miller Industries. See Brochures for part schematics and Features to see related parts and to see what models this will fit.

$84.99

Miller Pad-Wear

This is an inner tube slide pad for the wheel lift on all Century, Vulcan, Champion, & Challenger car carriers excluding the LCG Series. It is also compatible on Vulcan 810 Intruders and Century 411/412 & Midnight Express. See Features for quantities for each model needed. Each pad sold separately.

$24.99

Century Wear Pad 3" x 3" Challenger Champion and Vulcan

This is an inner tube slide pad for the top side of the wheel lift on all Century, Vulcan, Champion, & Challenger car carriers excluding the LCG Series. It is also compatible on Vulcan 810 Intruders and Century 411/412 & Midnight Express. See Features for quantities for each model needed. Each pad sold separately.

$28.49

Miller Wheel Lift Extend Cylinder Base Pin Century Holmes Vulcan

This is the Wheel Lift Extend Cylinder Base End Pin for Century Modular Midnight Express and Modular 211's. This pin also will fit Holmes 440SL, Vulcan Modular 804, 806, and 807 wreckers. It will also work with the Vulcan 810 Power Tilt light duty wrecker by Miller Industries. To view specific models see Features below. To view part schematics click the Brochure tab.

$38.99

Miller Wheel Lift Extend Cylinder Century Challenger Holmes Vulcan

This is the Wheel Lift Extend Cylinder on Light Duty Wreckers by Miller Industries. This extend cylinder will fit on the following models. The Century 300 Express Series, The Century 300 Modular Express Series, The Challenger 4300 Express Series, The Holmes 440SL Series, The Vulcan Modular 807, The Vulcan 810 Intruder, The Vulcan 812 Intruder, and The Vulcan 810 Power Tilt. To view part schematics click the Brochure Tab.

$811.99

Miller Rear Wheel Lift Extend Cylinder Pin Century Holmes Vulcan 5.88" x 7/8"

This is the Wheel Lift Extend Cylinder Pin for the wheel lift of many light duty wreckers by Miller Industries. This extend cylinder pin fits the following wreckers: Century Modular 300 Express Series, Century Modular Midnight Express, Century Modular 211, Holmes 440SL, Vulcan Modular 804, 806, and 807, and the Vulcan 810 Power Tilt. This pin measures 5.88" long with a diameter of 7/8". To view specific models and year range for each model see Features below.

$107.99

Miller Steel Wheel Lift L-Arm - Century, Holmes and Vulcan Wreckers

Note: Special Handling Fees Apply for Specific Items

This painted steel L-Arm from Miller Industries fits the wheel lifts on various models of Century, Holmes and Vulcan wreckers. Otherwise known as a tire restraint or wheel retainer, this L-Arm fits the crosstubes on the driver side. This part can be used to replace Driver Side Part Nos. 12-00803911 and 12-0803911 & Passenger Side Part Nos.12-00803912 and 12-0803912.

Option of driver or passenger position
Painted steel
Driver side (12-0806978) replaces driver side Part Nos. 12-00803911 and 12-0803911

Fits:
2010 - Current Century Modular Midnight Express
2000 - Current Century Midnight Express
2007 - Current Century Express 300 Series Modular
2009 - Current Holmes 440SL
2007 - Current Vulcan Modular 807
2000 - Current Vulcan 810 Intruder

$716.99

1 - 60 of 85 items

Refine Your Search

85 Results Result For "vulcan 810"