Search | Zip's

37 Results Result For "vulcan 810 parts"

Sort by

Miller Outer Stinger Weldment, Vulcan 810

This is the outer stinger weldment for the Vulcan 810. See features for related parts and brochures for reference chart.

$2,705.99

Miller Main Boom, 810

This is the main boom of a Vulcan 810 by Miller Industries. See Brochures for a reference chart and Features for related parts.

$4,987.99

Miller Lenz Hydraulic Replacement Element 10 Microns 25 PSI

This is a replacement filter element for part number 12-0311288 filter assembly and can be used in place of part number 9018309. The filter bypass is in the element. The filtration media in this element is 10 Micron Cellulose with a dirt holding capacity of 11. This element has a 3/4" port size and a 25 PSI bypass. This is the new style filter and will fit the filter assemblies found on Century, Chevron Holmes and Vulcan Wreckers and Car Carriers.

$46.99

Miller Hydraulic Tank Breather Cap, 3/4"

This is a replacement 3/4" hydraulic tank breather cap for Miller Light and Medium Duty wreckers. See Features to see what models this will all fit. This part can be used to replace Part Number, 9018113.

$68.99

Zip's Dolly Mounts for Auto Load Wreckers

These quality tow dolly mounts from Zip's were specifically designed to be installed on any self-loading wrecker built by Miller Industries. Select from two different item numbers to accommodate either Collins or In the Ditch branded dolly sets. Mounted on the rear slope of the wrecker body for quick and ergonomically-friendly access to the dolly, these brackets are perfect for the serious light duty towing operator. We try to make your life a little easier and safer on the road!

$159.99 – $184.99

Vulcan 810 Flange Bearing

This is a flange bearing for the outer stinger weldment on the Vulcan 810 by Miller Industries. See Features for related parts and brochures for reference chart.

$46.89

Miller Vulcan 810 and Holmes 440SL Hose Tension Shield

This is a hydraulic hose tension cover plate on the main boom of a Vulcan 810 and Holmes 440SL by Miller Industries. See Brochures for a reference chart and Features for related parts.

$163.99

Miller Stinger Pivot Pin, Vulcan 810/ Holmes 440SL

This is the pivot pin on the bottom of the boom of the Vulcan 810 and Holmes 440SL to be attached to the wheel lift stinger by Miller Industries. See Brochures for reference chart and Features for related parts.

$102.99

Century 300 Series / Holmes 440SL / Vulcan 810 Hose Tensioner Spring

This is a hydraulic hose tensioner spring for a Vulcan 810, Century 300 Series, and Holmes 440 Series by Miller Industries. See Brochures for a reference chart and Features for related parts.

$37.79

Miller Inner Stinger, Century 300 Series, Challenger 4300, Vulcan 810

This is the Inner Stinger Boom Weldment for the Wheel Lift on a Century 300 Express Series, Challenger 4300 Express, and Vulcan 810 Intruder by Miller Industries. See Brochures for part schematics and Features for related parts and to see what this will fit.

$1,774.99

Miller Wheel Lift Tilt Cylinder Upper Pin Century Holmes Vulcan

This is the Upper Pin for the Wheel Lift Tilt Cylinder on Century Modular Midnight Express, Holmes 440SL and Vulcan 810 Intruder light duty wreckers by Miller Industries. This pin is used to connect the tilt cylinder to the subframe assembly. To view the specific wrecker models see Features below. To view part schematics click on the Brochures tab.

$68.99

Miller Rod End Boom Lift Cylinder Pin Vulcan 805 / 806 / 807 / 810

This is the Wrecker Boom Lift Cylinder Upper Pin for the Vulcan 805, Vulcan 806, Vulcan 807 Auto Grip, and Vulcan 810 Intruder light duty wreckers by Miller Industries. This pin goes through the rod end of the lift cylinder. This pin connects the lift cylinder to the outer wrecker boom weldment. To see which specific wrecker models this cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.

$93.99

Miller 5-Spool Parker Electrical Control Valve

This is a replacement 5 Spool Parker Control Valve for the Vulcan 810 Auto-Load and the Century Modular Midnight Express light duty wreckers by Miller Industries. To view part schematics please click on the brochure tab above. This part can be used to replace part number 12-0306776.

$3,110.99

Century Vertical Boom Guide Pad 300 Series and Vulcan 800 Series

This is a Vertical Boom Guide pad for Century 300 Express Series, Century Modular 211, Vulcan Modular 804, Vulcan Modular 806, Vulcan Modular 807, Vulcan 805, Vulcan 810 Intruder, and Vulcan 812 Intruder by Miller Industries. See Brochures for part schematics and Features to see related parts and to see what models this will fit.

$81.99

Miller Inner Stinger Weldment, Century 300 Series, Holmes 440SL, Vulcan 807, 810PT

This is the Boom Inner Stinger Weldment for the Wheel Lift on a Century Modular 300 Express Series, Holmes 440SL, Vulcan Modular 807 and 810 Power Tilt by Miller Industries. See Brochures for part schematics and Features for related parts and to see what models this will fit.

$1,845.99

Miller Rear Wheel Lift Extend Cylinder Pin Century Holmes Vulcan 5.88" x 7/8"

This is the Wheel Lift Extend Cylinder Pin for the wheel lift of many light duty wreckers by Miller Industries. This extend cylinder pin fits the following wreckers: Century Modular 300 Express Series, Century Modular Midnight Express, Century Modular 211, Holmes 440SL, Vulcan Modular 804, 806, and 807, and the Vulcan 810 Power Tilt. This pin measures 5.88" long with a diameter of 7/8". To view specific models and year range for each model see Features below.

$102.99

Miller Swing L-Arm Cylinder Pin Century Challenger Vulcan

This is the L-Arm side, Swing L-Arm Cylinder Pin. This pin fits cylinder part number 12-0303844. This pin fits Century, Challenger and Vulcan wrecker models. To view specific models see Features below. To view part schematics click on the Brochures tab.

$93.99

Miller Century 300 Series Holmes 440SL and Vulcan 807/ 810 Small Grooved Sheave

This is a 2 Groove small sheave for the hydraulic hoses on the outer stinger weldment for a Vulcan 807/810, Century 300 Series, and Holmes 440SL by Miller Industries. See brochures for reference chart and see Features for related parts.

$67.99

Miller Century 200 / 300 Series Vulcan 800 Series Holmes 440 Series Boom Cover Plate

This is an access cover plate on the outer boom of a Century Modular Midnight Express/300 Series/211/212, Vulcan 804/807/806/810, and Holmes 440SL by Miller Industries. See Brochures for a reference chart and Features for related parts.

$16.99

Miller Wheel Lift Extend Cylinder Century Challenger Holmes Vulcan

This is the Wheel Lift Extend Cylinder on Light Duty Wreckers by Miller Industries. This extend cylinder will fit on the following models. The Century 300 Express Series, The Century 300 Modular Express Series, The Challenger 4300 Express Series, The Holmes 440SL Series, The Vulcan Modular 807, The Vulcan 810 Intruder, The Vulcan 812 Intruder, and The Vulcan 810 Power Tilt. To view part schematics click the Brochure Tab.

$817.99

Miller Rod End Wheel Lift Tilt Cylinder Pin Vulcan 810 Intruder

This is the Wheel Lift Tilt Cylinder Lower Pin for the Vulcan 810 Intruder light duty wrecker by Miller Industries. This pin goes through the rod end of the tilt cylinder. This pin attaches the wheel lift tilt cylinder to the wheel lift outer boom weldment. To view the part schematic click on the Brochure tab.

$85.99

Miller Boom Lift Cylinder 3.5" Bore x 10.44" Stroke Holmes Vulcan

This is the Wrecker Boom Lift Cylinder on the Holmes 440SL, Vulcan 810 Intruder, Vulcan 812 Intruder, and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This cylinder has a 3.5" bore with a 10.44" stroke. This lift cylinder connects to the subframe weldment and to the outer wrecker boom weldment. This is the cylinder that raises the boom of the wrecker up and down. This lift cylinder is also referred to as the boom elevation cylinder. To see which specific models this cylinder will fit please see Features below. To view part schematics click on the Brochure tab.

$1,318.99

Miller Base End Boom Lift Cylinder Pin Holmes Vulcan

This is the Wrecker Boom Lift Cylinder Pin for the Holmes 440SL, Vulcan 805, and Vulcan 810 Series light duty wreckers by Miller Industries. This pin goes through the base end of the lift cylinder. This pin connects the boom lift cylinder to the subframe weldment. To view part schematics click on the Brochure tab.

$71.99

Miller Rod End Wheel Lift Tilt Cylinder Pin Vulcan 812 and 810

This is the Wheel Lift Tilt Cylinder Lower Pin for the Vulcan 812 Intruder and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This pin goes through the rod end of the tilt cylinder. This pin attaches the tilt cylinder to the wheel lift outer boom weldment. To see which specific wrecker models this pin will fit please see Features below. To view the part schematics click on the Brochure tab.

$91.99

Miller Sheave Housing Assembly Century / Holmes / Vulcan

This is the sheave assembly for Century, Holmes, and Vulcan Light Duty wreckers. See Brochures for part schematics and Features to see what models this sheave assembly will fit.

$414.99

Miller Wheel Lift Fold Cylinder 4" Bore x 19.5" Stroke Vulcan 812 and 810

This is the Wheel Lift Fold Cylinder for the Wheel Lift on the Vulcan 812 Intruder and Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This cylinder has a 4" bore with a 19.5" stroke. This cylinder attaches to the wrecker outer boom weldment and to the wheel lift outer boom weldment. This is the cylinder that folds the wheel lift up against the boom of the wrecker for travel. To see which specific wrecker models this cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.

$2,151.99

Miller Wheel Lift Fold Cylinder 2.5" Century Holmes Vulcan

This is a 2.5" Wheel Lift Fold Cylinder on Century Modular Midnight Express, Holmes 440SL and Vulcan 810 Intruder light duty wreckers. To view specific wrecker models please see Features below. To view part schematics click on the Brochure tab. This part can be used to replace Part Number, 810700000.

$1,088.99

Miller Rod End Boom Lift Cylinder Pin Holmes Vulcan

This is the Wrecker Boom Lift Cylinder Pin on the Holmes 440SL, Vulcan 812 Intruder, and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This pin goes through the rod end of the lift cylinder. This pin connects the boom lift cylinder to the main boom of the wrecker. To see which specific models this pin will fit see Features below. To view part schematics click on the Brochure tab.

$97.99

Miller Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan

This is the front extend cylinder pin for the wheel lift extend cylinder on Miller Industries Light Duty Wreckers. It replaced part number 12-0703345. To view what models this pin fits on please see Features below. To view part schematics click on the Brochures tab.

$43.19

Miller Swing L-Arm Cylinder Clevis Pin 5/8" x 1.5" Century Holmes Vulcan

This is the clevis pin for the Swing L-Arm cylinder on the Century Express 300 Series, Holmes 440SL and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This clevis pin measures 5/8" x 1.5". This pin is used to connect the swing L-arm cylinder to the swing L-arm. To see which specific models this pin fits please see Features below. To view part schematics click on the Brochure tab.

$11.09

Miller Hydraulic Tank Breather Cap, 3/4"

$61.99

Century Wear Pad 3" x 3" Challenger Champion and Vulcan

This is an inner tube slide pad for the top side of the wheel lift on all Century, Vulcan, Champion, & Challenger car carriers excluding the LCG Series. It is also compatible on Vulcan 810 Intruders and Century 411/412 & Midnight Express. See Features for quantities for each model needed. Each pad sold separately.

$27.19

Miller Wheel Lift Extend Cylinder Base Pin Century Holmes Vulcan

This is the Wheel Lift Extend Cylinder Base End Pin for Century Modular Midnight Express and Modular 211's. This pin also will fit Holmes 440SL, Vulcan Modular 804, 806, and 807 wreckers. It will also work with the Vulcan 810 Power Tilt light duty wrecker by Miller Industries. To view specific models see Features below. To view part schematics click the Brochure tab.

$37.79

Miller Steel Wheel Lift L-Arm - Century, Holmes and Vulcan Wreckers

Note: Special Handling Fees Apply for Specific Items

This painted steel L-Arm from Miller Industries fits the wheel lifts on various models of Century, Holmes and Vulcan wreckers. Otherwise known as a tire restraint or wheel retainer, this L-Arm fits the crosstubes on the driver side. This part can be used to replace Driver Side Part Nos. 12-00803911 and 12-0803911 & Passenger Side Part Nos.12-00803912 and 12-0803912.

Option of driver or passenger position
Painted steel
Driver side (12-0806978) replaces driver side Part Nos. 12-00803911 and 12-0803911

Fits:
2010 - Current Century Modular Midnight Express
2000 - Current Century Midnight Express
2007 - Current Century Express 300 Series Modular
2009 - Current Holmes 440SL
2007 - Current Vulcan Modular 807
2000 - Current Vulcan 810 Intruder

$706.99

Nylon Insert Lock Nut 3/8" -16

This Nylon Insert Lock Nut has a diameter of 3/8" with a thread size of 16. It is made from steel with a zinc finish and it can be used on several Miller truck assemblies. These include Century Carriers, Century Wreckers, Challenger Wreckers, Champion Wreckers, Holmes Carriers, Holmes Wrecker, and Vulcan Wreckers. Please see the brochure tab for a list of breakdowns. This part can be used to replace Part Number 12-0400390.

$0.19

Miller Retaining Ring, 1-1/2"

This 1-1/2" Retaining Ring from Miller Industries is used on many different assemblies including boom, Subframe, recovery boom, wheel lift boom, underlift, dual and single winch extendable boom, and dual and single winch non-extendable boom assemblies. These assemblies can be found on many Century, Challenger, Champion, Eagle, Holmes, and Vulcan Wreckers. See the brochures tab for a full list of assemblies and part schematics.

$9.49

Miller Swing L-Arm Cylinder Century Challenger Holmes Vulcan

This is the Swing L-Arm Cylinder, also known as the Claw Cylinder, for autoload wreckers by Miller Industries. This cylinder will fit Century Express 300 Series, Midnight Express Series, Challenger 4300 Express Series, Holmes 440SL, Vulcan Modular 807, 810 Intruder and 810 Power Tilt Wreckers. To view part schematics click the Brochures tab.

$860.99

1 - 37 of 37 items

Refine Your Search

37 Results Result For "vulcan 810 parts"