Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Available in Classic, Tower's Edge or Heavy Duty webbing these straps are 2
inches wide and come with a d-ring attached at one end. Wheel Lift Straps are
perfect for securing vehicles tires to any wheel lift.
These Tie-Down Systems are simple to install, yet provides a secure, damage
free tie-down. Systems don't touch a vehicle's suspension, chassis or body,
thereby preventing any damage that might occur when using chains. Kits are
completely adjustable to fit any car or truck tire size. It is also available
in any strap length and hook combination. This system includes: four 14' or 18'
long straps with chain ends, four short straps with lined eyes and four
ratchets
with chains . The 18' length strap is perfect for larger
wheels and tires found on pick-ups and SUV's.
Available in Classic, Tower's Edge or Heavy Duty webbing these 2" straps come
with a flat snap hook attached at one end of each. A Cordura sleeve provides
added protection on each strap. These straps are commonly used on Dynamic Tow
Trucks. Wheel Lift Straps are perfect for securing vehicles tires to any wheel
lift.
This is a replacement low profile V-strap by B/A Products. This v-strap can be
used on most exotic and high end vehicles that don't have a tow eye attaching
point. This strap is used in the Allstate advanced roadside service towing kit.
This replacement strap ratchet has a durable design that meets or exceeds OEM
specifications and offers a patented double locking mechanism. This 2" wide
handled ratchet comes with a finger hook.
B/A's patented Twist Lock design is easy to install and easy to use. It has the
most secure latch on the market which prevents accidental release of the chain
from the hook connection and inadvertent re-hooking. These hooks can be used in
place of slip hooks.
This Screw Pin Anchor Shackle is made from alloy and is easy to remove. Use
this shackle when repairing links or fitting attachments. It has an open throat
design and requires no special tools to use.
Synthetic endless round slings are lightweight and pliable for easy rigging and
storage. They are made from polyester yarn covered by a double wall tubular
jacket. They are seamless and have a soft cover that won't scratch a load's
surface. Slings are color-coded for different capacities to be more convenient
when you need to make a fast decision on the job.
Available in Classic or Tower's Edge webbing these straps come with a new style
flat hook attached at one end. These basket straps are commonly used on
Jerr-Dan Tow Trucks. Basket Style Straps are used to hold the tire in place,
just put the strap over the tire and secure it for a tight
fit.
These B/A Synthetic Super Slings are super strong, versatile and are offered in
4 sizes to suit your individual needs. They are an endless loop style with a
full length floating protective sleeve that provides protection against damage
and wear to the sling.
B/a Products replacement "dog bone" strap are featured in many tiedown systems.
These straps feature reinforced eyes and abrasion resistant edged webbing.
With the help of the reliable 2" Chain Strap from B/A Products Co., you are able to experience optimized strength with superior durability that can help you get the job done with greater efficiency. Offering a strong grip on the load, you are able to work with maximum security when you take advantage of this strap and its working load limit of 4,000 lbs.
Underlift Tie-Down Straps will give you a secure tie-down and help you avoid
damage that is commonly associated with chain straps. These 2" wide tie-downs
are 76" long and come with ratchets and protective sleeves.
Underlift Tie-Down Straps will give you a secure tie-down and help you avoid
damage that is commonly associated with chain straps. These 3" wide tie-downs
are 64" long and come with ratchets and protective sleeves.
This replacement strap ratchet has a durable design that meets or exceeds OEM
specifications and offers a patented double locking mechanism. This 2" wide
handled ratchet comes with a snap hook. Use with 38-3D Strap for Auto-Load
Wreckers
This grade 70 Ultimate Axle Chain is 5/16" x 3' and comes with a grab hook and
slip hook on one end and an 8" j-hook on the other end. The Ultimate Axle Chains allow you to
quickly and easily chain up forward axles of tractors when performing a rear
tow.
These Grade 70 Chain assemblies are 5/16" and include a 15" j-hook at one end and a grab hook, r-hook, t-hook and mini j-hook on the other end. The forged, heat treated steel has excellent wear and abrasion resistance.
These Grade 70 Safety Chain assemblies are 5/16" include a grab hook at one end
and an r-hook, t-hook and mini j-hook on the other end. Carrier safety chains
can be used as primary or secondary securement chains on all types of carriers.
All chains are completely zinc plated and all hooks are forged, heat treated
steel.
Each of these axle straps comes with a d-ring attached at each end. These 3 ply
straps consist of B/A's Classic Web with protective polyester edges, making
this the heaviest, most durable style of axle strap. For the tower that uses
axle straps frequently or on a daily basis.
This replacement ratchet has a durable design that meets or exceeds OEM
specifications and offers a patented double locking mechanism. This 2" ratchet
comes with a finger hook.
These Grade 70 Chain assemblies are 5/16" and include a 15" j-hook at one end
and a grab hook and hammerhead t-j combo hook on the other end. The forged, heat
treated steel has excellent wear and abrasion resistance.
These Grade 100 Chain Assemblies come with a Cradle Grab Hook attached to each
end of each chain. Cradle Grab Hooks are far more superior than standard grab
hooks. Grade 100 chain is made from alloy steel and is extremely strong, 25%
higher work load limit than grade 80, making it ideal for recovery or lifting.
Available in Classic webbing these Low Profile V-Straps have a
15" j-hook attached to the end of each. Use the new Low Profile V-Straps from
B/A to reduce damage to the under carriage of vehicles. By using an oblong link
the hook of the winch line is now in a horizontal plane, with the tip of the
hook pointed away from components that could otherwise be damaged. This reduces
the risk of puncturing the vehicles' oil pan, transmission, valance, bumper,
radiator, etc. All V-Straps are made with reinforced Cordura eyes for maximum
resistance to tears, cuts and abrasions.
Available in Classic or Tower's Edge webbing these Low Profile V-Straps have
two legs with a three hook cluster attached to the end of each. The hook
clusters includes an r-hook, t-hook and mini j-hook. Use the new Low Profile
V-Straps from B/A to reduce damage to the under carriage of vehicles. By using
an oblong link the hook of the winch line is now in a horizontal plane, with
the tip of the hook pointed away from components that could otherwise be
damaged. This reduces the risk of puncturing the vehicles' oil pan,
transmission, valance, bumper, radiator, etc. All V-Straps are made with
reinforced Cordura eyes for maximum resistance to tears, cuts and abrasions.
For a safer and more reliable method of ensuring that the chains are tightly held down, you can use the Chain Ratchet Load Binder from B/A Products Co. This chain binder is designed to provide you with a method of securing the chains that does not put as much strain on the back and shoulder muscles as the lever chain binder sometimes does. It allows for slower, steadier tightening of the chains, allowing you to feel its strength right in the palms of your hands. There's less kinetic energy stored in the lever, lowering the risk of kickback during release. Simply hook the binder to the chains and start ratcheting to feel its strength. Meets or exceeds DOT, OSHA, ASTM and NACM specifications. NOT approved for overhead lifting.
These heavy duty V-Chain Bridle are perfect for loading and unloading heavier
vehicles and equipment on your flatbed car carrier or trailer. These Grade 80
chain bridles have a working load limit of 12,000 lbs at a 60 degree angle
which is great when loading heavy work trucks and equipment. These V-Chains have a 15" j-hook attached to the end of each. The
pear link that connects the legs also has two grab hooks connected to it. The
pear link provides a dedicated 60 degree pull-point which not only allows for a
higher work load limit but enables a safer environment for both the operator
and hardware, as it lowers the risk of the hook or other attachment from
sliding completely around.
These Grade 100 Axle Chain Assembly Kits have two 6' axle chains with an omega
link attached at one end of each chain. Kits also include a QuickBinder Plus
with a folding handle. Grade 100 chain is made from alloy steel and is
extremely strong, 25% higher work load limit than grade 80, making it ideal for
recovery or lifting. To use this axle chain you slip the chain through the
clevis and use it as a choker on the axle. Then you are able to use a binder
to hook on to chain and secure it to the under reach.
This Tie-Down System is simple to install, yet provides a secure, damage free
tie-down. System doesn't touch a vehicle's suspension, chassis or body, thereby
preventing any damage that might occur when using chains. This kit is
completely adjustable to fit any car or truck tire size. This system includes:
four 14' long straps with chain ends, four short straps with lined eyes and four
gradual release ratchets with chains.
The classic polyester webbing has been chosen as the Tower's
workhorse strap for decades and has become the standard for everyday use in the
towing industry. 96". Designed specifically for use on older Jerr-Dan Tow Trucks.
These Twist Lock Shackles have a quick locking and unlocking action which means
less time in the "danger zone". The pin will fully retract without coming loose
because it is permanently attached to the shackle.
These Grade 70 Chain Assemblies are 5/16" and include a 15" j-hook at one end
and a grab hook and mini j-hook on the other end. The forged, heat treated
steel has excellent wear and abrasion resistance.
These Grade 100 Chain Assemblies are 2' long with an oblong link attached at
one end and a foundry hook on the other end. Grade 100 chain is made from alloy
steel and is extremely strong, 25% higher work load limit than grade 80, making
it ideal for recovery or lifting.
These are B/A Grade 100 Sea Container Loading Bridles. These are a safe and
secure method for loading containers. They are made with dedicated pulling hooks
on each end for secure attachment and built in shortening hooks for easy
adjustment. These Sea Container Loading Bridles are available in 3/8" and 1/2"
sizes. Each leg is 5 foot long.
These lock pins are a quick and easy way to set your deck height.
Available in both left- and right-angled pins. Can be used almost anywhere on
your trailer.
Bolt Style Shackles offer the safest way to connect a web shackle to a recovery
strap. By adding the nut and bolt feature it now provides added peace of mind
when using the web shackles for normal recovery or accidental side loads.
This Low Profile V-Chain has two 2' legs with a 15" j-hook attached to the end
of each. The pear link that connects the legs also has two grab hooks connected
to it. Use the new Low Profile V-Chains from B/A to reduce damage to the under
carriage of vehicles. By using an oblong link the hook of the winch line is now
in a horizontal plane, with the tip of the hook pointed away from components
that could otherwise be damaged. This reduces the risk of puncturing the
vehicles' oil pan, transmission, valance, bumper, radiator, etc.
Wheel Lift Straps are perfect for securing vehicles tires to any wheel lift.
This 2" strap is 8 feet long and comes with a twisted snap hook attached at one
end.
Available in Classic or Tower's Edge webbing these 2" wide tie-downs are 66"
long and come with ratchets and protective sleeves. Underlift Tie-Down Straps
will give you a secure tie-down and help you avoid damage that is commonly
associated with chain straps.
The B/A Products Frame Hook was designed to provide an improved connection
point to truck and trailer frames without tip loading the hook for an even
distribution of weight.
These Grade 70 Binder Safety Chain Assemblies come with a Clevis Grab Hook
attached at each end of the chain. Carrier safety chains can be used as primary
or secondary securement chains on all types of carriers.
Available in Classic, Tower's Edge webbing these Low Profile V-Straps have two
24" legs with an 8" j-hook and hammerhead t-j combo hook attached to the end of
each. Use the new Low Profile V-Straps from B/A to reduce damage to the under
carriage of vehicles. By using an oblong link the hook of the winch line is now
in a horizontal plane, with the tip of the hook pointed away from components
that could otherwise be damaged. This reduces the risk of puncturing the
vehicles' oil pan, transmission, valance, bumper, radiator, etc. All V-Straps
are made with reinforced Cordura eyes for maximum resistance to tears, cuts and
abrasions.
This Low Profile V-Chain has two 3' legs with a r-hook, t-hook and mini j-hook
attached to the end of each. The pear link that connects the legs also has two
grab hooks connected to it. Use the new Low Profile V-Chains from B/A to reduce
damage to the under carriage of vehicles. By using an oblong link the hook of
the winch line is now in a horizontal plane, with the tip of the hook pointed
away from components that could otherwise be damaged. This reduces the risk of
puncturing the vehicles' oil pan, transmission, valance, bumper, radiator, etc.
These Grade 100 Chain Assemblies come with a Cradle Grab Hook attached to each end of each chain. Cradle Grab Hooks are far more superior than standard grab hooks. Grade 100 chain is made from alloy steel and is extremely strong, 25% higher work load limit than grade 80, making it ideal for recovery or lifting. These Chain Assemblies are come in Hi-Vis Yellow to help keep your recovery scene safe.
This Grade 70 Safety Chain is 5/16" x 10' and includes a heavy duty latched
sling on one end. Carrier safety chains can be used as primary or secondary
securement chains on all types of carriers. All chains are completely zinc
plated and all hooks are forged, heat treated steel.
This replacement strap ratchet has a durable design that meets or exceeds OEM
specifications and offers a patented double locking mechanism. This 2" wide
handled ratchet comes with a forged finger hook.
This is a B/A 2" Rubber Handle Gradual Release Ratchet with finger hook. This
is an easy to use ratchet with a comfort rubber grip handle. This ratchet makes
unstrapping a load quick, easy, and safe. It has a step-by-step controlled
gradual release action that reduces the risk of accidents. It also creates
less wear and tear on the ratchet. Stamped into each handle on the ratchet is
a Working Load Limit for easy identification.
Each of these axle straps comes with a delta ring attached at each end. These 1
ply axle straps with sewn on protective sleeves are for the tower that wants a
flexible axle strap but needs the added protection of a sewn on polyester
sleeve.
This Basket Style Strap is used to hold the tire in place, just put the strap
over the tire and secure it for a tight fit. Large strap comes with one cross
strap, two t-hooks attached at one end and a chain on the other. This basket
strap is commonly used on Century Tow Trucks.
Corner protectors are a must for all straps that contact loads. A seemingly dull edge can become a knife when the strap is put in tension. This part can be used to replace Part Numbers: 270412, 270SLEEVE, 38-CP4.
This is a B/A 2" Rubber Handle Gradual Release Ratchet with chain. This is an
easy to use ratchet with a comfort rubber grip handle. This ratchet makes
unstrapping a load quick, easy, and safe. It has a step-by-step controlled
gradual release action that reduces the risk of accidents. It also creates
less wear and tear on the ratchet. Stamped into each handle on the ratchet is
a Working Load Limit for easy identification.
Available in Classic or Tower's Edge webbing these 3" 3 ply Axle V-Straps come
with two legs that are connected with a pear link and have a flat hook and link
connected to each. The legs come with a protective sleeve for added durability.
Use these straps to prevent damage to the underside of the bumper or
spoiler.
Available in Classic, Tower's Edge or Heavy Duty webbing these Tie-Down Kits
includes four 8' cluster straps with ratchets that have a chain attached to
each. Tie-Down Kits are the best way to safely secure a vehicle to the bed of
your truck. Tie-Down kits are available in any length, style and
configuration.