Control Handle Assemblies and Hardware
Refine Your Search
Clear all filters- Brand
-
-
-
-
-
- Color
-
-
-
-
- Style
-
- Application Type
-
-
-
-
Your Filters
Clear All
Filter
Sort by
Loading...
Loading...
Miller Control Channel Box 74" Galvenized 05 and Up
This is a Miller Industries 74" Control Channel Box to connect the driver and
passenger side control box hoods. It is designed for all Century/Vulcan Car
Carriers 2005 & newer (Excluding LCG). It houses all the hoses/electronics for
a 5-spool system and is a galvenized finish.
$524.99
Miller Control Panel Decal DTU
This is a replacement decal for the control panel on the Miller Industries DTU
unit.
$83.99
Miller Control Channel Box 67.5" Galvanized Steel
This is a Miller Industries 67.5" Control Channel Box to connect the driver and passenger side control box hoods. It is designed for all Century/Vulcan Car Carriers before 2000. It houses all the hoses / electronics for a 5-spool system and is a galvanized finish. This control channel box comes in 2 different lengths, 67.5"(12-0801559) and 74"(12-0720437). In order to be accurate with you part selection you should measure the length your old one to see if it matches up correctly with this 67.5" control channel box.
$367.99
Miller Color Control Handle Kit
This is a color control handle kit by Miller Industries. This kit includes enough colored handles to do both sides of a large unit from a 4024 through a 6-winch rotator.
$1,244.99
Miller Control Long Knobs
These are Miller Industries Control Handle Knobs. They are offered in Blue
(12-0311699), Red (12-0311700), Green (12-0311701) and Gray (12-0311702).
$18.49
Miller Control Knob Old No Label
This is an older style Miller Industries Control Handle Knob. It is black in color, no markings, and is used for multiple functions on a light duty wrecker. See Features for related wreckers and Brochures for reference charts. This part can be used to replace Part Number 9032106.
$15.59
Vulcan 880 Decal Kit
This is a decal kit for the wheel lift operations on a Vulcan 880/890 Series by Miller Industries. This part can be used to replace Part Numbers: 9033149, 9033150, 9033151, 9033152, 9033153, 9033154, 9033155, and 9033156.
$40.19
Miller Control Lever Holmes / Century Light Duty Wrecker
Control Rod Lever for Miller Wrecker Models. Fits all Century 200 Series,
Holmes 550-2, 440-1 and 440-2, Century 411, 412, 611, 612, 601, 602, 712, 716,
211,311,312, Challenger 4700 and 4800 series wreckers with one piece bodies
Takes knob kit 12-0901425 for dual winch wreckers and 12-0901426 for single
winch wrecker.
$29.79
Miller Wheel Lift Control Rod Bushing 880 / 890 Series
This is a control rod bushing SSB-625 for the wheel lift on the Vulcan 880 and
890 Series wreckers by Miller Industries. See Features for related wreckers and
Brochures for reference charts.
$2.39
Miller Chevron Air Valve Toggle Guard
This is a replacement air valve toggle guard by Chevron. This guard is used to
protect the toggle switch used to operate an air valve on your car carrier bed.
$21.79
Miller Wheel Lift Control Rod 880 / 890 Series
This is a control rod for the wheel lift on the Vulcan 880 and 890 Series by
Miller Industries. See Features for related wreckers and Brochures for
reference charts.
$40.59
Miller Crossrod Bearing Angle Iron
This is an angle iron used to bear all the control rods and to keep them in
line on light duty wreckers by Miller Industries. See Features for related
wreckers and Brochures for reference charts.
$73.99
Miller Control Knob Kit Single Winch
This is a replacement control knob kit for the Century 400 / 600 Series light
duty wreckers by Miller Industries. This knob kit is for a single winch setup
on your wrecker. To view the part schematic please click on the Brochure tab
above.
$207.99
Miller Crossrod Bearing C Channel Iron
This is a C-channel end iron used to bear all the control rods and to keep
them in line on light duty wreckers by Miller Industries. See Features for
related wreckers and Brochures for reference charts.
$89.99
Miller Control Handle Bushing, Vulcan / Century .752" x .879" x .75"
This is a bushing for a control handle on Vulcan and Century light duty
wreckers by Miller Industries. It is flanged and is dimensioned at
3/4" x 7/8" x 3/4". See Features for related wreckers and Brochures for
reference charts.
$7.29
Miller Control Channel Galvanized
This is a replacement Control Channel with a galvanized finish.
$619.99
Miller Control Rod Short Extension 3.5"
This is a short extension rod for a control rod on light duty wreckers by
Miller Industries. It is 3 1/2" in length and can be used for different
applications on a light duty wrecker. See Features for related wreckers and
Brochures for reference charts.
$10.69
Miller Control Handle Pivot Rod 807 / 880 / 890S
This is a control handle pivot rod on the Vulcan 807 and 880/890 Series by
Miller Industries. See Features for related wreckers and Brochures for
reference charts.
$31.59
MARKER LIGHT PLT.AL.CENT T/S
This is a marker light plate with aluminum accents from Miller Industries.
$86.99
Miller Tie Rod, Winch 5/16 x 24" x 10.87"
This is a tie rod for the winch on light duty wreckers by Miller Industries.
It is used for the winch operation and is threaded 5/16-24 x 10.87". See
Features for related wreckers and Brochures for reference charts.
$10.69
Miller Stinger Extend Tie Rod Threaded Rod 5/16 x 24 x 16
This is a tie rod for the stinger extend on light duty wreckers by Miller
Industries. It is used for the stinger extend operation and is threaded
5/16-24 x 16". See Features for related wreckers and Brochures for reference
charts.
$14.99
Miller Boom Lift Tie Rod Threaded Rod 5/16 x 24 x 12.5"
This is a tie rod for the boom lift on light duty wreckers by Miller
Industries. It is used for the boom lift operation and is threaded 5/16-24 x
12.5". See Features for related wreckers and Brochures for reference charts.
$14.99
Filter
1 - 30 of 30 items
