Free Shipping!
Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
0 Item(s)
You have no items in your shopping cart.
-
- Shop Trucks & Trailers
- Shop Apparel
-
Shop Products
- Tools and Equipment
- Lighting
- Straps, Chains and Slings
-
Auto and Truck Accessories
- Tire and Wheel Supply
-
Exterior Accessories
- Suspension Upgrades
- Truck Fenders and Mounts
- Decals
- Horns and Sirens
- Backup Alarms
- Truck Body Trim and Hand Rails
- Mud Flaps
- Truck and Headache Racks
- Trailer Hitches and Receivers
- Push Bumpers and Hardware
- Truck Steps, Ladders and Handles
- Side View Mirrors
- Replacement Fuel Tanks
- Mico Brake Locks
- Throttle Controls
- Sunvisors
- Truck Service Lines and Accessories
- Interior Accessories
- Cargo Accessories
- Business Forms and Manuals
- Snow Plows and Parts
- Salt and Sand Spreaders and Parts
- Dump Bodies and Parts
- Diesel Particulate Filters and Gaskets
- Lift Gates and Parts
- Winches and Cables
- Toolboxes and Storage
- Battery Service
- Safety
-
Equipment and Trailer Parts
- Cylinder and Pin Replacements
- Control Handle Assemblies and Hardware
- Control Valve Bodies and Assemblies
- Control Cables
- Wheel Lift Parts
- Pivot Pins and Kits
- Wear Pads and Kits
- Bearing Pads and Kits
- Boom End Sheaves, Guides and Hardware
- Winch Cable Tie Backs
- Bed Lock Kits and Hardware
- Light Pylons
- Underlift Parts
- Fender Flares
- Car Hauler Trailer Parts
- Hose Trays
- Trailer Jacks and Plates
- Hydraulics
- Electrical
- Merchandise
-
Shop Parts by Schematic
Skip the search. Order parts faster right from our diagrams here.
-
- Shop Trucks & Trailers
- Shop Apparel
-
Shop Products
- Tools and Equipment
- Lighting
- Straps, Chains and Slings
-
Auto and Truck Accessories
- Tire and Wheel Supply
-
Exterior Accessories
- Suspension Upgrades
- Truck Fenders and Mounts
- Decals
- Horns and Sirens
- Backup Alarms
- Truck Body Trim and Hand Rails
- Mud Flaps
- Truck and Headache Racks
- Trailer Hitches and Receivers
- Push Bumpers and Hardware
- Truck Steps, Ladders and Handles
- Side View Mirrors
- Replacement Fuel Tanks
- Mico Brake Locks
- Throttle Controls
- Sunvisors
- Truck Service Lines and Accessories
- Interior Accessories
- Cargo Accessories
- Business Forms and Manuals
- Snow Plows and Parts
- Salt and Sand Spreaders and Parts
- Dump Bodies and Parts
- Diesel Particulate Filters and Gaskets
- Lift Gates and Parts
- Winches and Cables
- Toolboxes and Storage
- Battery Service
- Safety
-
Equipment and Trailer Parts
- Cylinder and Pin Replacements
- Control Handle Assemblies and Hardware
- Control Valve Bodies and Assemblies
- Control Cables
- Wheel Lift Parts
- Pivot Pins and Kits
- Wear Pads and Kits
- Bearing Pads and Kits
- Boom End Sheaves, Guides and Hardware
- Winch Cable Tie Backs
- Bed Lock Kits and Hardware
- Light Pylons
- Underlift Parts
- Fender Flares
- Car Hauler Trailer Parts
- Hose Trays
- Trailer Jacks and Plates
- Hydraulics
- Electrical
- Merchandise
-
Shop Parts by Schematic
Skip the search. Order parts faster right from our diagrams here.
Looking for apparel? Shop Zip's Outfitters
0 Item(s)
You have no items in your shopping cart.
Cylinders
Menu
Your Filters
Clear All
Filter
Sort by
Loading...
Loading...
Miller Wheel Lift Extend Cylinder 3" x 54"
This Wheel Lift Extend Cylinder measures 3" x 54". It is designed to withstand
necessary forces and to be used at states pressures. This cylinder meets
industry and government specifications and will prove itself on the job when it
really matters. It is used on Century Generation II 16 Series Car Carriers.
Please see the features below for a list of trucks and the brochure tab for a
list of breakdowns.
$1,249.99
Miller Wheel Lift Tilt Cylinder 3.25" x 1.75" x 13"
Note: Special Handling Fees Apply
This Hydraulic Wheel Lift Tilt Cylinder from Miller Industries measures 3.25" x 1.75" x 13". It is designed to withstand necessary forces and to be used at stated pressures. It meets industry and government specifications and will prove itself on the job when it really matters. The cylinder is used on Century Generation II 16 Series Steel & Aluminum Carriers. Please see the features below for a list of trucks and the brochure tab for a list of breakdowns.
This Hydraulic Wheel Lift Tilt Cylinder from Miller Industries measures 3.25" x 1.75" x 13". It is designed to withstand necessary forces and to be used at stated pressures. It meets industry and government specifications and will prove itself on the job when it really matters. The cylinder is used on Century Generation II 16 Series Steel & Aluminum Carriers. Please see the features below for a list of trucks and the brochure tab for a list of breakdowns.
- Black
- 3.25" x 1.75" x 13"
Fits: - Century 16 Series Generation II LCG Steel & Aluminum Carriers 2014-Current
- Length: 23.75"
- Width: 4"
- Seal kit 12-03030790
$1,051.99
Miller Cylinder Bed Extend 3 1/2" x 120"
Note: Special Handling Fees Apply
This Bed Extend Hydraulic Cylinder from Miller Industries has a 3-1/2" bore and 120" stroke. It is designed to withstand necessary forces and to be used at stated pressures. It meets industry and government specifications and will prove itself on the job when it really matters. Please see the features below for a list of trucks and the brochure tab for a list of breakdowns.
This Bed Extend Hydraulic Cylinder from Miller Industries has a 3-1/2" bore and 120" stroke. It is designed to withstand necessary forces and to be used at stated pressures. It meets industry and government specifications and will prove itself on the job when it really matters. Please see the features below for a list of trucks and the brochure tab for a list of breakdowns.
- Black
- 3-1/2" Bore x 120" Stroke
uses 15-73638 seal kit
Fits: - Century 12 Series LCG Steel & Aluminum Carriers 2009-Current
- Century 16 Series LCG Steel & Aluminum Carriers 2009-2014
- Century 16 Series Generation II LCG Steel & Aluminum Carriers 2014-Current
$2,574.99
Miller Wheel Lift Extend Cylinder
This Wheel Lift Extend Cylinder from Miller Industries is used on the Hydraulics Assembly of several Miller Car Carriers. These include Century, Challenger, Champion, Holmes, and Vulcan Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.
$646.99
Miller Wheel Lift Tilt Cylinder GEN II LCG 20 Series
This hydraulic wheel lift tilt cylinder is designed to withstand necessary
forces and to be used at stated pressures. It meets industry and government
specifications and will prove itself on the job when it really matters.
Standard cylinder color is black.
$1,180.99
Miller Wheel Lift Lift Cylinder 5" Bore Century 614 w/ FII
This is the Lift Cylinder for the Formula II Wheel Lift on the Century 614
light duty wreckers by Miller Industries. This lift cylinder has a 5" Bore.
This is the cylinder that lifts the boom of the wheel lift up and down. To see
which specific models this lift cylinder will fit please see Features below. To
view part schematics click on the Brochure tab.
$2,037.99
Miller Wheel Lift Lift Cylinder 5" Bore x 93/4" Stroke Challenger 4800 Series
This is the Lift Cylinder on the I-600 & I-500 Wheel Lifts on the Challenger
4800 Series light duty wreckers by Miller Industries. This cylinder has a 5"
bore with a 9-3/4" stroke. The lift cylinder connects to the wheel lift frame
weldment and to the wheel lift outer boom weldment. This is the cylinder that
raises the wheel lift boom up and down. To view the part schematic click on the
Brochure tab.
$10,013.99
Miller Wheel Lift Cylinder Century 712 and 716
This is the Lift Cylinder for the Wheel Lift on the Century 712 & 716 Series light
duty wreckers with a Formula III wheel lift. This is the cylinder that raises
your wheel lift boom up and down. To view the part schematic click on the
Brochure tab.
$2,640.99
Miller Wheel Lift Cylinder Century 712 and 716
This is the Lift Cylinder for the Wheel Lift on the Century 712 & 716 Series
light duty wreckers with a Formula III wheel lift. This is the cylinder that
raises your wheel lift boom up and down. This cylinder replaces part number
12-0303101 (which is no longer available).
$3,085.99
Miller Rear Left Lift Cylinder Dual Deck Carrier
This left bed lift hydraulic cylinder is designed to withstand necessary
forces and to be used at stated pressures. It meets industry and government
specifications and will prove itself on the job when it really matters.
Standard cylinder color is black.
$3,139.99
Miller Rear Right Lift Cylinder Dual Deck Carrier
This right bed lift hydraulic cylinder is designed to withstand necessary
forces and to be used at stated pressures. It meets industry and government
specifications and will prove itself on the job when it really matters.
Standard cylinder color is black.
$3,139.99
Miller Wheel Lift Tilt Cylinder 5.5" Bore Challenger 4800 Series
This is the Wheel Lift Tilt Cylinder for the I-600 Wheel Lift on the Challenger
4800 Series light duty wreckers by Miller Industries. This cylinder has a 5.5"
bore. This cylinder attaches to the link weldment and the wheel lift outer boom
and allows the wheel lift to tilt up and down. To view the part schematic click
on the Brochure tab.
$12,798.99
Miller Wheel Lift Tilt Cylinder GEN I LCG 12 and 16 Series
This hydraulic wheel lift tilt cylinder is designed to withstand necessary
forces and to be used at stated pressures. It meets industry and government
specifications and will prove itself on the job when it really matters.
Standard cylinder color is black.
$860.99
Miller Tow Bar Extend Cylinder 10 Series Century Carrier
This 12-0301798 10 Series Century Carrier Tow-Bar Extension Cylinder fits
carrier from 8/1986 to current. Uses cylinder seal kit 12-0304220
$1,084.99
Miller Front Lift Cylinder Dual Deck Carrier
This bed lift hydraulic cylinder is designed to withstand necessary forces and
to be used at stated pressures. It meets industry and government
specifications and will prove itself on the job when it really matters.
Standard cylinder color is black.
$1,553.99
Miller Boom Extend Cylinder Century and Challenger HD Wreckers
This is a replacement boom extend cylinder for Century and Challenger heavy
duty integrated wreckers by Miller Industries. This is the cylinder that
extends the main recovery boom of your wrecker. To view the specific models
this cylinder fits, see Features below. To view the part schematics, see the
Brochure tab.
$19,037.99
Filter
1 - 27 of 27 items
Newsletter
Information
Product Support
Customer service
Copyright © 2025 Zip's. All Rights Reserved. Seller reserves the right to adjust prices or correct errors. Privacy Policy