0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
Century Pin, Pivot W/L Boom Hinge 1.23
This is a Miller replacement pivot pin, W/L boom hinge 1.23. Carrier 38 x
1-1/4.
$110.99
Miller Wear Pad 1/2 x 2 x 4 W/Holes
This is a replacement nylon wear pad for a 4,000 lb. wheel lift. This wear pad
measures 1/2" x 2" x 4". These wear pads are pre-drilled for easy
installation.
$25.69
Miller Wheel Lift Tilt Cylinder 3.25" x 1.75" x 13"
Note: Special Handling Fees Apply
This Hydraulic Wheel Lift Tilt Cylinder from Miller Industries measures 3.25" x 1.75" x 13". It is designed to withstand necessary forces and to be used at stated pressures. It meets industry and government specifications and will prove itself on the job when it really matters. The cylinder is used on Century Generation II 16 Series Steel & Aluminum Carriers. Please see the features below for a list of trucks and the brochure tab for a list of breakdowns.
This Hydraulic Wheel Lift Tilt Cylinder from Miller Industries measures 3.25" x 1.75" x 13". It is designed to withstand necessary forces and to be used at stated pressures. It meets industry and government specifications and will prove itself on the job when it really matters. The cylinder is used on Century Generation II 16 Series Steel & Aluminum Carriers. Please see the features below for a list of trucks and the brochure tab for a list of breakdowns.
- Black
- 3.25" x 1.75" x 13"
Fits: - Century 16 Series Generation II LCG Steel & Aluminum Carriers 2014-Current
- Length: 23.75"
- Width: 4"
$948.99
Snap Ring,1 In Internal
This 1 Snap Ring from Miller Industries is used on the bed and frame assembly
of several Miller Car Carriers. These include Century, Challenger, Champion,
Holmes, and Vulcan carriers.
$1.29
Buyers Delta Ring w/ Weld On Bracket
Weld these D-Rings to your Wrecker, Carrier, or Trailer to assist you with all of your tie-down and hauling needs. Includes a weld-on mounting bracket made of AISI-1025 steel for 5/8" and AISI-1045 on 3/4" and 1".
$10.59
–
$19.69
Zip's Special Toolbox Mounting Bracket LR-5
Note: Special Handling Fees Apply for Specific Items
Easily mount toolboxes on rollbacks or carriers. Used for 24" X 24" toolboxes on car carrier beds.
Easily mount toolboxes on rollbacks or carriers. Used for 24" X 24" toolboxes on car carrier beds.
- 24"X24" or 24"X30"
- Pre drilled holes
- Sturdy steel angle iron
- Sold as each
Available in the following sizes
Item # Size Finish LR-2G 24" x 24" Galvanized LR-5 24" x 24" Powder Coated Black LR-5TG 24" X 30" Tall Galvanized LR-5T 24" X 30" Tall Powder Coated Black
$178.99
–
$240.99
Maxxima Plastic Chrome Oval Grommet Cover
Standard 6" Oval Chrome Plastic Grommet Cover for M50600-B, by Maxxima.
$6.29
Miller Grommet, Rubber, Century and Vulcan Wreckers
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
$2.99
Cylinder Pin, Carrier Non Ag
This is a cylinder pin, carrier non ag. .980 x 9 1/2, started 10/06.
$46.99
Chevron Wheel Lift Wear Pad Inner Boom 12 / 16 LCG Gen II
This is an inner tube slide pad for the top side of the wheel lift on the
Century 12 & 16 Series LCG Generation II Car Carrier. Each pad sold
separately.
$16.89
Del City Rubber Grommets 1/2" ID, 1/8" Groove Width , 1" OD
Rubber grommets help eliminate risk of wire, cord or hose chaffing on
applications due to metal drill holes or cutouts. Each rubber grommet is
flexible and allows for simple installation by easily snapping the rubber
grommet directly into the drill hole. Effective and easy to use rubber grommets
ensure your wiring projects and applications are protected and last longer.
$0.79
Chevron Outer Wear Pad
This is a replacement outer wear pad. Measuring at 1/2in x 2in x 4 inches.
$15.59
Related products
Century Bed Extension Cylinder 108"
Note: Special Handling Fees Apply
This Hydraulic Bed Extension Cylinder has a 3" bore, 2" rod, and it is 108" long. It is black in color and has a t-style end. This cylinder is designed to fit Challenger, Century, Champion, Holmes, and Vulcan Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns. Truck Freight Ship Direct Only
This Hydraulic Bed Extension Cylinder has a 3" bore, 2" rod, and it is 108" long. It is black in color and has a t-style end. This cylinder is designed to fit Challenger, Century, Champion, Holmes, and Vulcan Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns. Truck Freight Ship Direct Only
- 3" Bore
- 2" Rod
- 108" Length
- Uses Bed Attachment Pin 12-0702434
- Uses Snap Rings 12-0301642
- Uses Seal Kit 12-0308385
Fits: - Challenger Car Carriers
- Century 10 Series Steel & Aluminum Carriers
- Century 15 Series Steel & Aluminum Carriers
- Champion Steel & Aluminum Carriers
- Holmes 10 Series Steel & Aluminum Carriers
- Vulcan 10 Series Steel & Aluminum Carriers
- Vulcan 10 Series Extreme Angle Steel Carriers
$2,532.99
Century Seal Kit
This seal kit is designed to withstand the temperatures and pressures of
hydraulic cylinders and can help operators get the maximum productivity out of
their machine. Resealing cylinders is one way to help lower operating costs and
improve the performance of your machines hydraulic system. Please remember that
seal kits may fit different cylinders of the same diameter. See the chart below
for more information.
$53.99
Miller Cylinder Bed Extend 3 1/2" x 120"
Note: Special Handling Fees Apply
This Bed Extend Hydraulic Cylinder from Miller Industries has a 3-1/2" bore and 120" stroke. It is designed to withstand necessary forces and to be used at stated pressures. It meets industry and government specifications and will prove itself on the job when it really matters. Please see the features below for a list of trucks and the brochure tab for a list of breakdowns.
This Bed Extend Hydraulic Cylinder from Miller Industries has a 3-1/2" bore and 120" stroke. It is designed to withstand necessary forces and to be used at stated pressures. It meets industry and government specifications and will prove itself on the job when it really matters. Please see the features below for a list of trucks and the brochure tab for a list of breakdowns.
- Black
- 3-1/2" Bore x 120" Stroke
uses 15-73638 seal kit
Fits: - Century 12 Series LCG Steel & Aluminum Carriers 2009-Current
- Century 16 Series LCG Steel & Aluminum Carriers 2009-2014
- Century 16 Series Generation II LCG Steel & Aluminum Carriers 2014-Current
$2,326.99
Miller Seal Kit Wheel Lift Up / Down Cylinder
This seal kit is designed to withstand the temperatures and pressures of
hydraulic cylinders and can help operators get the maximum productivity out of
their machine. Resealing cylinders is one way to help lower operating costs and
improve the performance of your machines hydraulic system. Please remember that
seal kits may fit different cylinders of the same diameter.
$93.99
Miller Wheel Lift Tilt Cylinder 3.25" x 1.75" x 13"
Note: Special Handling Fees Apply
This Hydraulic Wheel Lift Tilt Cylinder from Miller Industries measures 3.25" x 1.75" x 13". It is designed to withstand necessary forces and to be used at stated pressures. It meets industry and government specifications and will prove itself on the job when it really matters. The cylinder is used on Century Generation II 16 Series Steel & Aluminum Carriers. Please see the features below for a list of trucks and the brochure tab for a list of breakdowns.
This Hydraulic Wheel Lift Tilt Cylinder from Miller Industries measures 3.25" x 1.75" x 13". It is designed to withstand necessary forces and to be used at stated pressures. It meets industry and government specifications and will prove itself on the job when it really matters. The cylinder is used on Century Generation II 16 Series Steel & Aluminum Carriers. Please see the features below for a list of trucks and the brochure tab for a list of breakdowns.
- Black
- 3.25" x 1.75" x 13"
Fits: - Century 16 Series Generation II LCG Steel & Aluminum Carriers 2014-Current
- Length: 23.75"
- Width: 4"
$948.99
Jerr Dan Wheel Lift Pivot Pin - Greaseless
Wheel Lift Pivot Pin for Jerr Dan Wreckers With Greaseless Pins That Have
Manual L-Arms.
$285.99
Century Pin Lift Cylinder Century 10 Series
This Lift Cylinder Pin from Miller Industries is used on the Tilt Frame
Assembly of Century 10 Series Car Carriers made after 2005. See the brochure
tab for a breakdown.
$45.99
Century Seal Kit Holmac Trailer Cylinder Titan
This Seal Kit from Miller Industries is used with a Holmac Trailer Cylinder
that has a 2" Bore. This Cylinder is us commonly used on Titan T5, T7 and T8
Trailers. Please see the brochure tab for breakdowns.
$119.99
Century Seal Kit Bed Slide and Tilt
This seal kit is designed to withstand the temperatures and pressures of hydraulic cylinders and can help operators get the maximum productivity out of their machine. Resealing cylinders is one way to help lower operating costs and improve the performance of your machines hydraulic system. Please remember that seal kits may fit different cylinders of the same diameter. See the chart below for more information. This part can be used to replace Part Numbers: 12-0304219, 12-0304190, and 12-0306388.
$117.99
Century Bed Tilt Cylinder 3" Bore x 16.25" Stroke
Note: Special Handling Fees Apply
This Bed Tilt Cylinder from Miller Industries is designed to withstand the necessary forces and be used at stated pressures. It meets industry and government specifications, so it will prove itself when the job really matters. It is used on the assembly of many Miller Car Carriers, including Challenger, Century, Champion, Holmes, and Vulcan. See the features below for a full list of carriers and see the brochure tab for breakdowns.
This Bed Tilt Cylinder from Miller Industries is designed to withstand the necessary forces and be used at stated pressures. It meets industry and government specifications, so it will prove itself when the job really matters. It is used on the assembly of many Miller Car Carriers, including Challenger, Century, Champion, Holmes, and Vulcan. See the features below for a full list of carriers and see the brochure tab for breakdowns.
- Bore: 3"
- Stroke: 16.25"
- Standard color is black
- Uses Seal Kit 12-0308385
- Uses Cylinder Pin 12-0702434
- Uses Snap Rings 12-0301642
Fits: - Century 10 Series Carriers
- Century 20 Series Carriers
- Century 30 Series Carriers
- Challenger Car Carriers
- Champion 19'-21' Carriers
- Holmes 10 Series Carriers
- Vulcan 10 Series Carriers
- Vulcan 10 Series Extreme Angle Carriers
$744.99
Century Seal Kit 20 Series Century Holmes and Champion W/L In / Out
This seal kit fits, Century, Holmes, and Champion Wheel-lift In/Out cylinders afer December 2002. It is a universal kit that will fit Texas (marked TH) ot Green manufactures cylinders. Please remember that seal kits may fit different c ylinders of the same diameter. See the chart below for more information. This part can be used to replace Part Numbers: 12-0308388 and 12-0308896.
$129.99
Miller Wheel Lift Extend Cylinder
Note: Special Handling Fees Apply
This Wheel Lift Extend Cylinder from Miller Industries is used on the Hydraulics Assembly of several Miller Car Carriers. These include Century, Challenger, Champion, Holmes, and Vulcan Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.
Overall Dimensions: 72" x 3" x 3"
Hole Sizes: 1" and 3/4"
The other overall length of one side 5" x 3"
Other side 6" x 1 1/2"
This Wheel Lift Extend Cylinder from Miller Industries is used on the Hydraulics Assembly of several Miller Car Carriers. These include Century, Challenger, Champion, Holmes, and Vulcan Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.
- Standard color is black
- Uses Seal Kit 12-0306134
Fits: - Century 10 Series Steel & Aluminum Carriers
- Century 15 Series Steel & Aluminum Carriers
- Century LCG 12 Series Steel & Aluminum Carriers
- Century LCG 16 Series Steel & Aluminum Carriers
- Challenger Car Carriers
- Champion Steel & Aluminum Carriers
- Holmes 10 Series Steel & Aluminum Carriers
- Vulcan 10 Series Steel & Aluminum Carriers
- Vulcan 10 Series Extreme Angle Steel Carriers
$1,099.99
Miller Wheel Lift Extend Cylinder Shaft Base End LCG Carriers
This is a replacement wheel lift extend cylinder shaft on LCG car carriers by
Miller Industries. This is the shaft attaches the base end of the cylinder to
the wheel lift outer boom weldment. To view specific models see Features below.
To view the part schematics see the Brochure tab.
$25.59
Century Seal Kit Wheel Lift Cylinder
This seal kit is designed to withstand the temperatures and pressures of
hydraulic cylinders and can help operators get the maximum productivity out of
their machine. Resealing cylinders is one way to help lower operating costs and
improve the performance of your machines hydraulic system. Please remember that
seal kits may fit different cylinders of the same diameter. See the chart below
for more information.
$139.99
Miller Wheel Lift Extend Cylinder Shaft Rod End LCG Carriers
This is a replacement wheel lift extend cylinder shaft on LCG car carriers by
Miller Industries. This is the shaft attaches the rod end of the cylinder to
the wheel lift inner boom weldment. To view specific models see Features below.
To view the part schematics see the Brochure tab.
$39.99
Century Bed Extension Cylinder 108"
Note: Special Handling Fees Apply
This Hydraulic Bed Extension Cylinder has a 3" bore, 2" rod, and it is 108" long. It is black in color and has a t-style end. This cylinder is designed to fit Challenger, Century, Champion, Holmes, and Vulcan Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns. Truck Freight Ship Direct Only
This Hydraulic Bed Extension Cylinder has a 3" bore, 2" rod, and it is 108" long. It is black in color and has a t-style end. This cylinder is designed to fit Challenger, Century, Champion, Holmes, and Vulcan Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns. Truck Freight Ship Direct Only
- 3" Bore
- 2" Rod
- 108" Length
- Uses Bed Attachment Pin 12-0702434
- Uses Snap Rings 12-0301642
- Uses Seal Kit 12-0308385
Fits: - Challenger Car Carriers
- Century 10 Series Steel & Aluminum Carriers
- Century 15 Series Steel & Aluminum Carriers
- Champion Steel & Aluminum Carriers
- Holmes 10 Series Steel & Aluminum Carriers
- Vulcan 10 Series Steel & Aluminum Carriers
- Vulcan 10 Series Extreme Angle Steel Carriers
$2,532.99
Century Seal Kit
This seal kit is designed to withstand the temperatures and pressures of
hydraulic cylinders and can help operators get the maximum productivity out of
their machine. Resealing cylinders is one way to help lower operating costs and
improve the performance of your machines hydraulic system. Please remember that
seal kits may fit different cylinders of the same diameter. See the chart below
for more information.
$53.99
Miller Cylinder Bed Extend 3 1/2" x 120"
Note: Special Handling Fees Apply
This Bed Extend Hydraulic Cylinder from Miller Industries has a 3-1/2" bore and 120" stroke. It is designed to withstand necessary forces and to be used at stated pressures. It meets industry and government specifications and will prove itself on the job when it really matters. Please see the features below for a list of trucks and the brochure tab for a list of breakdowns.
This Bed Extend Hydraulic Cylinder from Miller Industries has a 3-1/2" bore and 120" stroke. It is designed to withstand necessary forces and to be used at stated pressures. It meets industry and government specifications and will prove itself on the job when it really matters. Please see the features below for a list of trucks and the brochure tab for a list of breakdowns.
- Black
- 3-1/2" Bore x 120" Stroke
uses 15-73638 seal kit
Fits: - Century 12 Series LCG Steel & Aluminum Carriers 2009-Current
- Century 16 Series LCG Steel & Aluminum Carriers 2009-2014
- Century 16 Series Generation II LCG Steel & Aluminum Carriers 2014-Current
$2,326.99
Miller Seal Kit Wheel Lift Up / Down Cylinder
This seal kit is designed to withstand the temperatures and pressures of
hydraulic cylinders and can help operators get the maximum productivity out of
their machine. Resealing cylinders is one way to help lower operating costs and
improve the performance of your machines hydraulic system. Please remember that
seal kits may fit different cylinders of the same diameter.
$93.99
Miller Wheel Lift Tilt Cylinder 3.25" x 1.75" x 13"
Note: Special Handling Fees Apply
This Hydraulic Wheel Lift Tilt Cylinder from Miller Industries measures 3.25" x 1.75" x 13". It is designed to withstand necessary forces and to be used at stated pressures. It meets industry and government specifications and will prove itself on the job when it really matters. The cylinder is used on Century Generation II 16 Series Steel & Aluminum Carriers. Please see the features below for a list of trucks and the brochure tab for a list of breakdowns.
This Hydraulic Wheel Lift Tilt Cylinder from Miller Industries measures 3.25" x 1.75" x 13". It is designed to withstand necessary forces and to be used at stated pressures. It meets industry and government specifications and will prove itself on the job when it really matters. The cylinder is used on Century Generation II 16 Series Steel & Aluminum Carriers. Please see the features below for a list of trucks and the brochure tab for a list of breakdowns.
- Black
- 3.25" x 1.75" x 13"
Fits: - Century 16 Series Generation II LCG Steel & Aluminum Carriers 2014-Current
- Length: 23.75"
- Width: 4"
$948.99
Jerr Dan Wheel Lift Pivot Pin - Greaseless
Wheel Lift Pivot Pin for Jerr Dan Wreckers With Greaseless Pins That Have
Manual L-Arms.
$285.99
Century Pin Lift Cylinder Century 10 Series
This Lift Cylinder Pin from Miller Industries is used on the Tilt Frame
Assembly of Century 10 Series Car Carriers made after 2005. See the brochure
tab for a breakdown.
$45.99
Century Seal Kit Holmac Trailer Cylinder Titan
This Seal Kit from Miller Industries is used with a Holmac Trailer Cylinder
that has a 2" Bore. This Cylinder is us commonly used on Titan T5, T7 and T8
Trailers. Please see the brochure tab for breakdowns.
$119.99
Century Seal Kit Bed Slide and Tilt
This seal kit is designed to withstand the temperatures and pressures of hydraulic cylinders and can help operators get the maximum productivity out of their machine. Resealing cylinders is one way to help lower operating costs and improve the performance of your machines hydraulic system. Please remember that seal kits may fit different cylinders of the same diameter. See the chart below for more information. This part can be used to replace Part Numbers: 12-0304219, 12-0304190, and 12-0306388.
$117.99
Century Bed Tilt Cylinder 3" Bore x 16.25" Stroke
Note: Special Handling Fees Apply
This Bed Tilt Cylinder from Miller Industries is designed to withstand the necessary forces and be used at stated pressures. It meets industry and government specifications, so it will prove itself when the job really matters. It is used on the assembly of many Miller Car Carriers, including Challenger, Century, Champion, Holmes, and Vulcan. See the features below for a full list of carriers and see the brochure tab for breakdowns.
This Bed Tilt Cylinder from Miller Industries is designed to withstand the necessary forces and be used at stated pressures. It meets industry and government specifications, so it will prove itself when the job really matters. It is used on the assembly of many Miller Car Carriers, including Challenger, Century, Champion, Holmes, and Vulcan. See the features below for a full list of carriers and see the brochure tab for breakdowns.
- Bore: 3"
- Stroke: 16.25"
- Standard color is black
- Uses Seal Kit 12-0308385
- Uses Cylinder Pin 12-0702434
- Uses Snap Rings 12-0301642
Fits: - Century 10 Series Carriers
- Century 20 Series Carriers
- Century 30 Series Carriers
- Challenger Car Carriers
- Champion 19'-21' Carriers
- Holmes 10 Series Carriers
- Vulcan 10 Series Carriers
- Vulcan 10 Series Extreme Angle Carriers
$744.99
Century Seal Kit 20 Series Century Holmes and Champion W/L In / Out
This seal kit fits, Century, Holmes, and Champion Wheel-lift In/Out cylinders afer December 2002. It is a universal kit that will fit Texas (marked TH) ot Green manufactures cylinders. Please remember that seal kits may fit different c ylinders of the same diameter. See the chart below for more information. This part can be used to replace Part Numbers: 12-0308388 and 12-0308896.
$129.99
Miller Wheel Lift Extend Cylinder
Note: Special Handling Fees Apply
This Wheel Lift Extend Cylinder from Miller Industries is used on the Hydraulics Assembly of several Miller Car Carriers. These include Century, Challenger, Champion, Holmes, and Vulcan Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.
Overall Dimensions: 72" x 3" x 3"
Hole Sizes: 1" and 3/4"
The other overall length of one side 5" x 3"
Other side 6" x 1 1/2"
This Wheel Lift Extend Cylinder from Miller Industries is used on the Hydraulics Assembly of several Miller Car Carriers. These include Century, Challenger, Champion, Holmes, and Vulcan Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.
- Standard color is black
- Uses Seal Kit 12-0306134
Fits: - Century 10 Series Steel & Aluminum Carriers
- Century 15 Series Steel & Aluminum Carriers
- Century LCG 12 Series Steel & Aluminum Carriers
- Century LCG 16 Series Steel & Aluminum Carriers
- Challenger Car Carriers
- Champion Steel & Aluminum Carriers
- Holmes 10 Series Steel & Aluminum Carriers
- Vulcan 10 Series Steel & Aluminum Carriers
- Vulcan 10 Series Extreme Angle Steel Carriers
$1,099.99
Miller Wheel Lift Extend Cylinder Shaft Base End LCG Carriers
This is a replacement wheel lift extend cylinder shaft on LCG car carriers by
Miller Industries. This is the shaft attaches the base end of the cylinder to
the wheel lift outer boom weldment. To view specific models see Features below.
To view the part schematics see the Brochure tab.
$25.59
Century Seal Kit Wheel Lift Cylinder
This seal kit is designed to withstand the temperatures and pressures of
hydraulic cylinders and can help operators get the maximum productivity out of
their machine. Resealing cylinders is one way to help lower operating costs and
improve the performance of your machines hydraulic system. Please remember that
seal kits may fit different cylinders of the same diameter. See the chart below
for more information.
$139.99
Miller Wheel Lift Extend Cylinder Shaft Rod End LCG Carriers
This is a replacement wheel lift extend cylinder shaft on LCG car carriers by
Miller Industries. This is the shaft attaches the rod end of the cylinder to
the wheel lift inner boom weldment. To view specific models see Features below.
To view the part schematics see the Brochure tab.
$39.99
