Outer Crosstubes

This is a 3" right hand Outer Cross Tube from Miller Industries. It features a cam lock to hold the wheel grid onto the crossbar, a cam lock to hold the L-Arm in, and 2 hooks for a ratch & strap style hold-down. This cross tube fits 3" x 3" square crossbars. This cross tube receiver fits Century and Champion 10 Series Car Carriers.

This passenger side outer crosstube from Miller Industries fits Challenger I-500 and Challenger Invader wheel lifts. The steel painted crosstube accepts 2 x 3 L-Arms and features a diamond-plate tire pan. Otherwise known as a tire restraint and wheel retainer, the L-Arm (Part No. RB0257) is held in place with a removable pin.

Outer Crosstube assembly, left hand, fits Century Formula 6000 & 6500 and Holmes DFT-650 wheel lifts. Uses 12-0903478 standard 3500lbs l-arm.

Outer Crosstube assembly, right hand, fits Century Formula 6000 & 6500 and Holmes DFT-650 wheel lifts. Uses 12-0903479 standard 3500lbs L-Arm.

Outer Crosstube assembly, left hand, fits Challenger I-500 wheel lifts, accepts RB0120 l-arm.

Outer crosstube assembly, right hand, fits Holmes DFT200 wheel lifts. Uses GR-619 L-Arm.

Vulcan 896/897 4.5" x 4.5" Wheel Grid for the Driver Side.

This Outer Left Hand Crosstube Assembly fits Century Formula 6000 and 6500 Series, Holmes DFT-650 wheel lifts, and Century 20 Series car carriers. This crosstube accepts a

Replacement pivot lock pin with attachment cable for Century new style "Pivot-L" wheel grids. This part can be used to replace Part Numbers: 12-0714415 and 12-0904140.

This is a replacement L-arm claw pivot pin weldment used on the wheel lift of the Century Modular Midnight Express and the Holmes 220 Snatcher and 440SL light duty wreckers by Miller Industries. This is the pin that allows the L-arm to pivot on the crossbar which secures the tire of towed vehicle. To view the part schematics please click on the Brochure tab above.

This is a front stop pin assembly for the scoop bracket weldment on Light Duty Vulcan Wreckers by Miller Industries. This stop pin w ill fit the following models: Vulcan Modular 804, Modular 806, and Modular 880/890. It works for both sides of the wrecker. This par t can be used to replace Part Numbers: 8621400 and 880411500.

This right hand end plate from Miller industries is used on the outer crosstube assembly on various equipment from Miller Industries. This L-arm bracket is used on the new style "Pivot-L" crosstubes. This bracket attaches to the end of the crosstube to allow your L-arm to pivot.

This left hand end plate from Miller industries is used on the outer crosstube assembly on various equipment from Miller Industries. This L-arm bracket is used on the new style "Pivot-L" crosstubes. This bracket attaches to the end of the crosstube to allow your L-arm to pivot.

Note: Special Handling Fees Apply

Wheel Grid assembly, left hand, fits Vulcan 850 & 890 wheel lifts. Uses 8501000 L-arm. This part can be used to replace Part Number, 8500400.

• Fits on 4" x 4" square tube
• Vulcan patented strapless system
• 6,000lbs lift rating

This is a pivot shaft for an L-Arm Bracket to the crosstube on the Century 211 by Miller Industries. See Brochures for a reference chart.

Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube Assembly from Miller Industries is a complete left hand assembly. This cross tube is used on the outer cross tube and 3-way pivot tire restraint assembly of Century and Century LCG Carriers, and Vulcan LCG Wreckers. It fits 3.5" x 3.5" square tubes and it accepts

This 3.5" Outer Cross Tube Assembly from Miller Industries is a complete Right Hand Assembly. It is used on the wheel lift assembly of Century 20 Series Steel and Aluminum Car Carriers that were made in 2006 to current. The cross tube is 31.5" long and it is rated a t 6,000 lbs. The 3 and 4 Car Carriers use a different part number,