Viair Corporation

This air compressor, Viair 350C, operates using low amp draw so they reversatile for many mobile pneumatic applications. Features include a standard 1/4" NPT stainless steel braided leader hose with inline check valve and insulated wiring for simple installation. Note: Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque is 12 to 15 ft. lbs.

Viair 88P is a newly-designed, powerful portable tire inflator, capable of inflating up to 33-inch tires. Attach the heavy duty battery clamps to your vehicle s battery, and start the engine. Connect to a tire valve stem and turn the unit on. Tire pressure can easily be checked using the gauge incorporated into the top of the unit.

Viair's Ultra Duty Onboard Air System is a pre-packaged compressed air solution that provides an industry-leading, 200 PSI rated, 100% duty cycle 480C compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires of virtually any size.

This system is ideal for powering air tools and suspension systems, and filling tires. The easy-to-install wiring harness and manifold make wiring and plumbing the system straightforward. System includes: (1) 60A fuse & fuse holder (1) 80A relay (2) 1/4"BSP adapters for air lockers (1) T-fitting 1/4" NPT Female x 1/4" NPT Female x 1/4" NPT Male (1) 1/8" to 1/4" NPT reducer (1) Wiring harness with Delphi connections (2) Delphi connector plug kits (1) Billet 1/4" NPT x 6-port manifold and mounting bracket (1) Air filter housing with installed element (2) Replacement air filter elements (1) Dash panel air pressure gauge (1) Air pressure regulator (0-200 psi) (1) 15' DOT air line.

Pressure Switch,Relay,12V Only,1/8"NPT.

This tire inflation kit from Viair features a three-inch gauge with either an analog or digital readout. Including a deluxe carrying bag, the kit works with all on-board air systems with an air tank. The 30-foot polyeurethane air line is equipped with a quick connect stud and coupler, and the trigger air gun has a folding lever air chuck at the end of a 12-inch rubber hose.

The Viair 400P Portable Compressor features a brand new I-Beam Sand Tray for improved stability and lighter weight. The 400P is a larger powerful portable tire inflator kit that can inflate up to a 35-inch tire from 0 to 30 PSI in less than 6 minutes. Used and approved of by off road enthusiasts worldwide, the 400P can save you when you re miles from home

It features horizontal cooling fins and a trapezoidal head design, a standard 3/8" stainless steel braided leader hose with 3/8" NPT inline check valve and insulated wiring.

Portable compressors with automatic shutoff come into play when moving from tire to tire, and when checking tire pressure in the middle of a tire fill. A typical portable compressor must be turned off between tire fills, and anytime you want to check tire pressure. If you aren't near the compressor, this can turn into running laps back and forth to the portable compressor to turn the unit on and off. Automatic portables do not work in this fashion and will save you time & effort to get tires inflated quickly.