Search | Zip's

64 Results Result For "l arm pin"

Sort by

Landoll Pin L-Arm Stop

Unable to sell outside of the United States of America

$178.99

Miller Outer Crosstube - Challenger I-500 and Challlenger Invader Wheel Lifts

This passenger side outer crosstube from Miller Industries fits Challenger I-500 and Challenger Invader wheel lifts. The steel painted crosstube accepts 2 x 3 L-Arms and features a diamond-plate tire pan. Otherwise known as a tire restraint and wheel retainer, the L-Arm (Part No. RB0257) is held in place with a removable pin.

$1,567.99

Miller Passenger Pivot-Style L-Arm Receiver Bracket - Vulcan 896 & 898

This passenger side pivot-style L-Arm receiver bracket from Miller Industries attaches to the outer crosstubes on Vulcan 896 and 897 Series light-duty wrecker wheel lift assemblies. Also known as a wheel retainer and tire restraint, the L-Arm slides into the angled opening, and the desired position is secured with the bottom side locking pin. This scoop bracket weldment includes the swivel locking pin and the comfort grip stop pin.

$342.99

Miller Pivot-Style L-Arm Receiver Bracket - Vulcan 870

Option of driver or passenger side pivot-style l-arm receiver bracket from Miller Industries attackes to the outer crosstubes on Vulcan 870 Series light-duty wrecker wheel lift assebmlies. Also known as a wheel retainer and tire restraint, the L-Arm slides into the angled opening, and the desired position is secured with the bottom side locking pin. This scoop bracket weldment includes the swivel locking pin and the comfort grip stop pin.

$548.99

Miller Pivot-Style L-Arm Receiver Bracket - Vulcan 850

Option of driver or passenger side pivot-style l-arm receiver bracket from Miller Industries attaches to the outer crosstubes on Vulcan 850 Series light-duty wrecker wheel lift assemblies. Also known as a wheel retainer and tire restraint, the L-Arm slides into the angled opening, and the desired position is secured with the bottom side locking pin. This scoop bracket weldment includes the swivel locking pin and the comfort grip stop pin.

$391.99

Miller Pivot-Style L-Arm Receiver Bracket - Vulcan 896 and 897

Option of driver or passenger side pivot-style L-Arm receiver bracket from Miller Industries attaches to the outer crosstubes on Vulcan 896 and 897 Series light-duty wrecker wheel lift assemblies. Also known as a wheel retainer and tire restraint, the L-Arm slides into the angled opening, and the desired position is secured with the bottom side locking pin. This scoop bracket weldment includes the swivel locking pin and the comfort grip stop pin.

$342.99

Plunger Pin Kit, Pivot L-Arm Century

This is a replacement plunger pin kit, pivot L-arm for Century.

$105.99

Miller Pivote-Style L-Arm Assembly for Century Formula 1 Wheel Lift

This pivot-style L-Arm assembly from Miller Industries is designed for the Century Formula 1 wheel lift. This kit fits 3 square crossbars and includes black painted steel crosstubes and alloy L-Arms for each side. The swivel arm is held in place with a removeable pin, and each L-Arm is secured with a separate underneath pin and spring plunger. Also known as a tire restraint or wheel retainer, the L-Arms offer a 4,000-lb. weight rating as a pair. This assembly can be upfitted to a 6,000-lb. rating with the 12-0904186 & 12-0904187 steel L-arms.

$3,621.99

Miller Pivote-Style L-Arm Assembly for Century Formula 1 Wheel Lift

This pivot-style L-Arm assembly from Miller Industries is designed for the Century Formula 1 wheel lift. This kit fits 3 square crossbars and includes painted black steel crosstubes and alloy scoop L-Arms for each side. The swivel arm is held in place with a removeable pin, and each L-Arm is secured with a separate underneath pin and spring plunger. Also known as a tire restraint or wheel retainer, this aluminum L-Arm offers a 4,000-lb. weight rating as a pair.

$5,023.99

Miller Pivot-Style L-Arm Assembly for Century Formula 6500 Wheel Lift

This pivot-style L-Arm assembly from Miller Industries is designed for the Century Formula 6500 wheel lift. This kit fits 3-1/2 square crossbars and includes black painted steel crosstubes and alloy L-Arms for each side. The swivel arm is held in place with a removeable pin, and each L-Arm is secured with a separate underneath pin and spring plunger. Also known as a tire restraint or wheel retainer, this L-Arm with a scoop-style tire pan offers a 4,000-lb. weight rating as a pair. This assembly can be upfitted to a 6,000-lb. rating with the 12-0904186 & 12-0904187 steel L-arms.

$3,326.99

Vulcan 3 Way Pivot Right Outer Crosstube - 890 Series

Outer Crosstube assembly, right hand, New style "Pivot-L" with line-up pin, designed for Vulcan 890 Series. Accepts 12-0904157 light weight aluminum L-arm. This part can be used to replace Part Number 12-0902791.

$1,387.99

Vulcan 3 Way Pivot Right Outer Crosstube - 890 Series

Outer Crosstube assembly, right hand, New style "Pivot-L" with line-up pin, designed for Vulcan 890 Series with 4"x4" crossbar. Accepts 12-0904157 light weight aluminum L-arm. This part can be used to replace Part Number 12-0902791.

$1,387.99

Miller Outer Crosstube Left Challenger I-500

Outer Crosstube assembly, left hand, fits Challenger I-500 wheel lifts, accepts RB0120 l-arm.

$645.00

Miller Outer Crosstube Right Challenger I-500

Outer Crosstube assembly, right hand, fits Challenger I-500 wheel lifts, accepts RB0120 l-arm.

$645.00

Century Style 3" Crosstube Wheel Grid - Passenger Side

Note: Special Handling Fees Apply

This Century style wheel grid features a T-handle screw-in style plunger pin to hold the Century style L-arm wheel retainer in place. This crosstube is designed to fit on a 3" x 3" wheel lift crossbar. Fits: Century and Champion 10 Series Car Carriers by Miller.

Dimensions: 25 1/2" x 3 3/4" x 8
Shop for the left hand version of this Outer Cross Tube, 12-0905094

Fits:
Century 10 Series Carriers
Champion 10 Series Carriers

$584.99

Century Style 3" Crosstube Wheel Grid - Driver Side

Thumbscrew to Hold Wheel Grid On
Cam Lock to Lod L-Arm In
2 Hooks for Ratchet & Strap Style Hold-Down (for Safety Chains)
Shop for the right hand version of this Outer Cross Tube, 12-0905095

Fits:
Century 10 Series Carriers
Champion 10 Series Carriers

$584.99

Federal Signal Littlite Task Light

Please Note: Product Discontinued - ALL SALES FINAL!

$99.99

Miller Replacement L-Arm Pin Assembly

Replacement pivot lock pin with attachment cable for Century new style "Pivot-L" wheel grids. This part can be used to replace Part Numbers: 12-0714415 and 12-0904140.

$18.39

Miller Roll Pin 1/4" x 1 3/4"

This is a 1/4" x 1-3/4" Roll Pin that is used to secure the Swing L-Arm Pin on a Vulcan Modular 807 light duty wrecker by Miller Industries. To view the part schematic click on the Brochure tab.

$0.29

Miller Snap Ring, 3/4", Vulcan 812 Intruder

This is a 3/4" Snap Ring by Miller Industries. This snap ring is used on the Swing L-Arm Pins. This snap ring secures the pin in place. To view the part schematic click on the Brochure tab.

$6.99

Miller L-Arm Locking Pin - Vulcan 850 and 890

This bottom side locking pin from Miller Industries holds the L-Arm at the desired position in the slide-in bracket on wheel lift assemblies for Vulcan 850 and 890 Series light-duty wreckers. With an allen head, the pin screws into the bottom of the scoop bracket and fits the adjustment holes on the scoop L-Arm, also known as a wheel retainer and tire restraint.

$35.39

Miller L-Arm Locking Pin - Vulcan 896 and 897

This locking pin from Miller Industries fits the pivot-style L-Arm receiver bracket on Vulcan 896 and 897 light-duty wrecker wheel grids. This pin keeps from the L-Arm bracket from pivoting on the crosstube. An L-Arm is also known as a scoop, wheel retainer and tire restraint.

$24.89

Miller L-Arm Locking Pin - Vulcan 860 and 870

This bottom side locking pin from Miller Industries holds the L-Arm at the desired position in the slide-in bracket on wheel lift assemblies for Vulcan 860 and 870 Series light-duty wreckers. With an allen head, the pin bolts into the bottom of the scoop bracket and fits the adjustment holes on the scoop L-Arm, also known as a wheel retainer and tire restraint.

$28.79

Miller Swing L-Arm Cylinder Pin Century Challenger Vulcan

This is the L-Arm side, Swing L-Arm Cylinder Pin. This pin fits cylinder part number 12-0303844. This pin fits Century, Challenger and Vulcan wrecker models. To view specific models see Features below. To view part schematics click on the Brochures tab.

$98.99

Century Swing L-Arm Pivot Pin Weldment

This is a Pivot Pin for the Swing L-Arm on a Wheel Lift Assembly. It is from Miller Industries.

$101.99

Miller Pivot Bracket for Formula I Wheel Lift L-Arms, Right Hand

This is a replacement right hand pivot bracket for Formula I L-arm by Miller Industries. The L-arm pivot pin to use is part number 12- 0807504. This part can be used to replace Part Number 12-0904401.

$704.99

Miller L-Arm Claw Pivot Pin Weldment Century Modular Midnight Express and Holmes 220 / 440SL

This is a replacement L-arm claw pivot pin weldment used on the wheel lift of the Century Modular Midnight Express and the Holmes 220 Snatcher and 440SL light duty wreckers by Miller Industries. This is the pin that allows the L-arm to pivot on the crossbar which secures the tire of towed vehicle. To view the part schematics please click on the Brochure tab above.

$105.99

Miller Swing L-Arm Cylinder Clevis Pin 5/8" x 1.5" Century Holmes Vulcan

This is the clevis pin for the Swing L-Arm cylinder on the Century Express 300 Series, Holmes 440SL and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This clevis pin measures 5/8" x 1.5". This pin is used to connect the swing L-arm cylinder to the swing L-arm. To see which specific models this pin fits please see Features below. To view part schematics click on the Brochure tab.

$11.99

Miller Driver Pivot-Style L-Arm Receiver Bracket

This driver side pivot-style L-Arm receiver bracket from Miller Industries attaches to the outer crosstubes on Vulcan 850 and 890 Series light-duty wrecker wheel lift assemblies. Also known as a wheel retainer and tire restraint, the L-Arm slides into the angled opening, and the desired position is secured with the bottom side locking pin. This scoop bracket weldment includes the swivel locking pin but does not include the stop pin.

$515.99

Miller Passenger Pivot-Style L-Arm Receiver Bracket

This passenger side pivot-style L-Arm receiver bracket from Miller Industries attaches to the outer crosstubes on Vulcan 850 and 890 Series light-duty wrecker wheel lift assemblies. Also known as a wheel retainer and tire restraint, the L-Arm slides into the angled opening, and the desired position is secured with the bottom side locking pin. This scoop bracket weldment includes the swivel locking pin but does not include the stop pin.

$515.99

Miller Receiver Left 3" x 3" Century Formula I Holmes DFT 400 and Century / Champion 10 Series Carriers

Also known as: wheel grid, slide bar, or Outer Crosstube, this left outer crosstube assembly will fit a 3" x 3" square crosstube. It has a cam lock to hold the wheel grid onto the crossbar, a black knob plunger pin to hold the L-Arm in, and 4 hooks for a basket strap style hold down. This crosstube fits the following wrecker models: Century Formula I & Holmes DFT-400. It also will fit Century & Champion 10 Series Carriers. It accepts part number 12-0903479 standard 3,500 lbs. L-Arm. This part can be used to replace Part Number 12-0800912.

$800.99

Miller Cotter Pin 1/8" x 1 1/4"

This Cotter Pin from Miller Industries is used on the Winch Clutch Control of 4-Ton Hydraulic Winches,

$7.29

Safety Snap Pin 5/16

This is a pin, 5/16 safety snap, holds carrier L-arm in holder.

$2.09

Miller Steel L-Arm Bracket Replacement - Vulcan 896, 897 and V30 Light and MD Wreckers

This painted steel L-Arm bracket from Miller Industries is a replacement weldment for the wheel lift on Vulcan 896, 897 and V30 light- and medium-duty wreckers. This receiver mounts to the passenger side wheel grid and secure the L-Arm, otherwise known as a scoop, wheel retainer or tire restraint.

$712.99

Miller Wheel Lift L-Arm Crossbar - Vulcan 860 and 870 LD Wheel Lift

This black painted steel L-Arm bracket from Miller Industries attaches to the drivers side crossbar on Vulcan 860 and 870 light-duty wreckers. Also known as a tire restraint or wheel retainer, a wheel scoop attaches to the wheel lift with this part and is held in place with a lock pin. The pin is not included. Order Part No. 8700109 for the pin. Driver side (8701600) replaces Part No. (8719440). Passenger side (8701500) replaces Part No. (8719340).

$474.99

Miller Wheel Lift Upper Arm Pin Weldment Century / Holmes

This is a replacement wheel lift upper arm pin weldment on Light Duty Century and Holmes Wreckers by Miller Industries. This pin attaches the wheel lift upper arm weldment to the frame weldment. This pin fits the Century Formula 6500, 600 Series and Modular 400 & 600 Series. It will also fit the Holmes HP 552/DFT 650 wrecker. To view the part schematics please click the Brochures tab.

$81.99

B/A Products T Handle Pin 5/8"

This 5/8" diameter Pin comes with a t-handle and release button. It's for Chevron L-Arm and fits Chevron 408 and Car Carrier wheel grids.

$64.99

All-Grip Chevron Style T Handle Pin

This is a Chevron T-handle pin. Choose from three size options: 5/8" X 3" reach, 3/4" X 3-1/2" reach, & 3/4" X 3" reach

$35.99 – $75.99

Vulcan Front Crosstube 3.5" Stop Pin Assembly

This is a front stop pin assembly for the scoop bracket weldment on Light Duty Vulcan Wreckers by Miller Industries. This stop pin w ill fit the following models: Vulcan Modular 804, Modular 806, and Modular 880/890. It works for both sides of the wrecker. This par t can be used to replace Part Numbers: 8621400 and 880411500.

$42.59

Miller Wheel Lift Tilt Cylinder Upper Arm Pin Century Holmes

This is a Pin that is used in different locations on the Wheel Lift of Century Formula I Duplex Tilt 411 & 412, and Holmes 440 Series / DFT 400 light Duty wreckers by Miller Industries. This pin is used to hold the tilt cylinders on to the wheel lift frame weldment. This pin also is used to attach the upper arm weldments to the wheel lift frame weldment also. To view part schematics click on the Brochure tab.

$103.99

Miller Vulcan 880 / 890 Series Boom Pivot Pin Shim 5/64"

This is the 5/64" thick boom pivot pin shim for a Vulcan 880/890 Series by Miller Industries. See Brochures for a reference chart and features for related parts.

$11.99

Miller Vulcan Modular 880 / 890 Boom Pivot Pin Shim 1/8"

This is the 1/8" thick boom pivot pin shim for a Vulcan Modular 880/890 Series by Miller Industries. See Brochures for a reference chart and features for related parts.

$11.99

Miller Century Formula I 411 / 412 Boom Pivot Pin

This is the boom pivot pin for a Century Formula I 411/412 by Miller Industries. See Brochures for a reference chart and features for related parts.

$118.99

Miller Outer Crosstube for I-400 Wheel Lift on Challenger 4700 Series LD Wreckers

This painted steel Quick Pik Lite outer crosstube assembly from Miller Industires fits the I-400 wheel lift on Challenger 4700 Series light-duty wreckers. The driver side 3 square tube accepts driver side L-Arms (Part No. 12-0904277) & the passenger side 3" square tube accepts passenger side L-Arms (Part No. 12-0904278), otherwise known as tire restraints and wheel retainers.

$1,348.99

Miller Side Bus Lift Tire Pan - Vulcan 20

This quick-attach bus lift tire pan from Miller Industries fits the retaining arm on wheel lifts for Vulcan 20 Series heavy-duty wreckers, option of driver or passenger side fit. The pan is grated for extra grip, and the pin holes are reinforced for added strength. This bracket includes a D-ring for strap hooks. The retaining arm is also known as scoop, wheel retainer and tire restraint.

$836.99

Miller Wrecker Frame Base Century Formula I 411

This is the wrecker frame base for a Century Formula I 411 by Miller Industries. See Brochures for a refrence chart and Features for related parts.

$2,084.99

Miller Wheel Lift Upper Arm Boom Pin Weldment Century / Holmes

This is a replacement wheel lift upper arm pin weldment on Light Duty Century and Holmes Wreckers by Miller Industries. This pin attaches the wheel lift upper arm weldment to the outer boom weldment of the wheel lift. This pin fits the Century Formula 6500, 600 Series and Modular 400 & 600 Series. It will also fit the Holmes HP 552/DFT 650 wrecker. To view the part schematics please click the Brochures tab.

$67.99

Century 3 Way Pivot Right Outer Crosstube Century 6500 and Holmes DFT 650

Outer Crosstube assembly, right hand, New style "Pivot-L" with line-up pin, fits Century Formula 6000 & 6500 and Holmes DFT-650 whee l lifts. Accepts 12-0904157 light weight aluminum L-arm. This part can be used to replace Part Number 12-0902791.

$1,574.99

Miller Century / Champion / Holmes Crossbar 3"

Miller Crossbar, Century Formula wheel lift and Century & Champion carrier wheel lifts, uses WL-300K2 pivot pin kit. Fits 1996 and older Century wreckers and 2002 and older Century and Champion Car Carriers. Use 12-0803238 for newer models.

$727.99

Miller Century 3 Way Pivot Left Outer Crosstube Century 6500 and Holmes DFT 650

Note: Special Handling Fees Apply

Outer Crosstube assembly, left hand, New style "Pivot-L" with line-up pin, fits Century Formula 6000 & 6500 and Holmes DFT-650 wheel lifts. Accepts 12-0904156 light weight aluminum L-arm. This part can be used to replace Part Number 12-0902790.

Fits 3 1/2" x 3 1/2" square tube
Century new style "Pivot-L" with line-up pin
Uses 12-0902382 basket strap
Can also be used on Century/Champion 20 series car carriers

$1,574.99

Century 3 Way Pivot Right Outer Crosstube Century / Holmes / Champion

Note: Special Handling Fees Apply

Also known as a wheel grid, or slide bar, this right hand outer crosstube with a line up pin from Miller Industries fits 3" x 3" square tubes. It is used on the outer crosstube and pivot assembly of Century Car Carriers and Wreckers. It can also fit Century Formula I Wreckers, Holmes DFT-400 Wreckers, and Champion 10 Series Car Carriers. This crosstube accepts a Right Hand L-Arm Tire Restraint 12-0904157. To shop for the left hand version of this receiver, 12-0904152, click here. Please see the brochures tab for assemblies and breakdowns. This part can be used to replace Part Number 12-0902897.

New style Century "Pivot-L" with line-up pin
Get a left hand version of this receiver, 12-0904152, by clicking here
Accepts a Right Hand L-Arm Tire Restraint 12-0904157

Fits:
2001-2004 Century 10 Series Carriers
2002-2005 Century 15 Series Carriers
2009-Current Century Modular 400 & 600 Wreckers
Century Formula I Wreckers
Champion 10 Series Carriers
Holmes DFT-400 Wreckers

$1,518.99

Century/Holmes/Champion 3 Way Pivot Left Outer Crosstube

Note: Special Handling Fees Apply

Also known as a wheel grid, or slide bar, this left hand outer crosstube with a line up pin from Miller Industries fits 3" x 3" square tubes. It is used on the outer crosstube and pivot assembly of Century Car Carriers and Wreckers. It can also fit Century Formula I Wreckers, Holmes DFT-400 Wreckers, and Champion 10 Series Car Carriers. This crosstube accepts a Left Hand L-Arm Tire Restraint 12-0904156. To shop for the right hand version of this receiver, 12-0904153, click here. Please see the brochures tab for assemblies and breakdowns. This part can be used to replace Part Number 12-0902896.

New style Century "Pivot-L" with line-up pin
Get a right hand version of this receiver, 12-0904153, by clicking here
Accepts a Left Hand L-Arm Tire Restraint 12-0904156

Fits:
2001-2004 Century 10 Series Carriers
2002-2005 Century 15 Series Carriers
2009-Current Century Modular 400 & 600 Wreckers
Century Formula I Wreckers
Champion 10 Series Carriers
Holmes DFT-400 Wreckers

$1,518.99

Century / Champion / Vulcan / LCG Right Crosstube 3.5"

Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete right hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the left hand version of this Cross Tube,

$470.99

Century / Champion / Vulcan / LCG Left 3.5"

Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete left hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the right hand version of this Cross Tube,

$470.99

Miller Pivot Crosstube Left 3.5" Century / Champion / Vulcan

Also known as a wheel grid, slide bar, or receiver this 3.5" Outer Cross Tube from Miller Industries is a complete Left Hand assembly. This new style "Pivot-L" has a line-up pin and fits 3.5" x 3.5" square tubes. The cross tube fits Century, Champion, and Vulcan Car Carriers. It will accept a left hand

$1,184.99

Miller Pivot Crosstube Right 3.5" Century / Champion / Vulcan

Also known as a wheel grid, slide bar, or receiver this 3.5" Outer Cross Tube from Miller Industries is a complete Right Hand assembly. This new style "Pivot-L" has a line-up pin and fits 3.5" x 3.5" square tubes. The cross tube fits Century, Champion, and Vulcan Car Carriers. It will accept a right hand

$1,184.99

Century Formula I 1996 and Newer Crossbar 3" x 3"

Note: Special Handling Fees Apply

This is a crossbar for a Century Formula I Wheel Lift Assembly. It will fit Formula I Wheel Lifts that were built in 1996 or newer. It uses a WL-300K3 pivot pin kit.

3" x 3" square tube
Used on Formula I wheel lifts after March 1996
Accepts 12-0902456 & 12-0902457 standard l-arm outer crosst ubes
Also accepts 12-0904152 & 12-0904153 pivot l-arm outer crosstubes
Uses WL-300DK1 detent ball kit
Length: 53"
Width: 4"
H eight: 9.25"

$727.99

Century Crossbar 3.5"

This 3.5" x 3.5" square tube Crossbar from Miller Industries is used in the wheel lift assembly of Century 20 Series Car Carriers. It can also be used on Century Formula 6000 and Formula II Wheel Lifts with one piece pivot pins. See the brochure tab for a list of breakdowns.

$929.99

1 - 60 of 64 items

Refine Your Search

64 Results Result For "l arm pin"