Equipment & Trailer Parts | Replacement Parts

Sort by

Century Control Handle 8" Blue

This is a replacement control handle for the new Miller Car Carriers. It is blue in color, and measures 8" long. 1/2-13 thread.

$41.09

Century Control Handle 8" Gray

This is a replacement control handle for the new Miller Car Carriers. It is Gray in color, and measures 8" long.

$41.09

Century Control Handle 8" Red

This is a replacement control handle for the new Miller Car Carriers. It is Red in color, and measures 8" long.

$41.09

Century Seal Kit Bed Slide or Bed Tilt

This seal kit is designed to withstand the temperatures and pressures of hydraulic cylinders and can help operators get the maximum productivity out of their machine. Resealing cylinders is one way to help lower operating costs and improve the performance of your machines hydraulic system. Please remember that seal kits may fit different cylinders of the same diameter. See the chart below for more information. This part can be used to replace Part Numbers: 12-0304219, 12-0304190, and 12-0306388.

$130.99

Century Wheel Lift Inner Tube Wear Pad 6" x 1.5" Holmes and Vulcan

This is a nylatron wear pad by Miller Industries. It measures 6" x 1-1/2" x 3/8". It will fit the following wreckers: Century Modular Express 300 Series, Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes 440SL, 600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder, Modular 880/890, and 896/897. See Features for related parts and Brochures for reference charts.

$12.69

Century Slide Pad 7" x 3" x 3/8"

This Slide Pad from Miller Industries is used in the wheel lift, underlift, and tower assemblies of several Century, Challenger, and Holmes wreckers. This slide pad measures 7" long, 3" tall, and 3/8" wide.

$21.29

Century Control Handle Assembly 5 Spool

This is a Miller Industries handle assembly for a 5-Spool Control Assembly. See features for what is included in this part#

$331.99

Miller Swing L-Arm Cylinder Century Challenger Holmes Vulcan

This is the Swing L-Arm Cylinder, also known as the Claw Cylinder, for autoload wreckers by Miller Industries. This cylinder will fit Century Express 300 Series, Midnight Express Series, Challenger 4300 Express Series, Holmes 440SL, Vulcan Modular 807, 810 Intruder and 810 Power Tilt Wreckers. To view part schematics click the Brochures tab.

$860.99

Miller Control Cable 84" Century and Vulcan Light Duty Wreckers

This replacement control cable from Miller Industries is for Century and Vulcan Light Duty Wreckers. This is a marine grade cable th at measures 84" long and has a 1" stroke. This cable replaces part numbers: 12-0311724 and 518-1007200.

$211.99

Century / Champion / Vulcan / LCG Right Crosstube 3.5"

Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete right hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the left hand version of this Cross Tube,

$463.99

Miller Thrust Washer, 1/16"

This Thrust Washer from Miller Industries has a diameter of 10" and a thickness of 1/16". It is used on many different Miller wrecker assemblies, including, SDU, LDU, Underlift, and Tower assemblies on Century, Challenger, and Holmes wreckers. Please see the brochure tab for a list of breakdowns.

$56.99

Century Wear Pad 3" x 3" Challenger Champion and Vulcan

This is an inner tube slide pad for the top side of the wheel lift on all Century, Vulcan, Champion, & Challenger car carriers excluding the LCG Series. It is also compatible on Vulcan 810 Intruders and Century 411/412 & Midnight Express. See Features for quantities for each model needed. Each pad sold separately.

$27.19

Miller Control Cable 114" Century and Challenger Heavy Wreckers

This is a replacement control cable for Century and Challenger Heavy Duty Wreckers. This control cable is 114" long and has a 1" stroke. Please see Features for what models this control cable will fit.

$161.99

Miller Thrust Washer, 1/8"

This Thrust Washer from Miller Industries has a diameter of 10" and a thickness of 1/8". It is used on many different Miller wrecker assemblies, including, SDU, LDU, Underlift, and Tower assemblies on Century, Challenger, and Holmes wreckers. Please see the brochure tab for a list of breakdowns.

$90.99

Century / Champion / Vulcan / LCG Left 3.5"

Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete left hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the right hand version of this Cross Tube,

$463.99

Miller Swing L-Arm Cylinder Pin Century Challenger Vulcan

This is the L-Arm side, Swing L-Arm Cylinder Pin. This pin fits cylinder part number 12-0303844. This pin fits Century, Challenger and Vulcan wrecker models. To view specific models see Features below. To view part schematics click on the Brochures tab.

$93.99

Century Clevis Pin Carrier Control Handles 5/16" x 1"

This clevis pin measures 5/16" x 1". To view part schematics click on the Brochure tab.

$6.89

Century Spacer Pad Underlift Heavy Duty Wreckers

This is a replacement spacer pad that bolts to the underside of the underlift boom to help the boom slide in and out efficiently. This pad is used on Century and Challenger heavy duty wreckers by Miller Industries. To view specific models this pad fits see Features below. To view the part schematics click on the Brochure tab.

$48.79

Miller 4 Spool Control Valve

This 4 Spool Hydraulic Control Valve from Miller Industries fits on Miller 10 Series Car Carriers (Prior to 2001) and Miller 30 Seri es Car Carriers (2005-Current). It is also used on most twin line Century/Vulcan Wreckers. See the attached brochures for related pa rts data. This part can be used to replace Part Number 12-0303093.

$1,080.99

Century and Challenger Underlift Spacer Pad 2nd Stage for Heavy Duty Wreckers

This is a replacement spacer pad for the second stage of the underlift boom on Century and Challenger heavy duty wreckers by Miller Industries. This pad bolts to the underside of the underlift boom. It helps slide the boom in and out efficiently. It also catches on the wear pad mounting bracket of the next stage of the underlift boom to slide that section out. To view specific models this spacer pad fits see Features below. To view the part schematics click on the Brochure tab.

$54.99

Miller Knee Boom Spacer Slide Pad

This 2-1/4" Slide Pad from Miller Industries is used on the outer tube Boom/Wheel Lift Assembly of Several Miller Wreckers.

$11.09

Miller Control Lever Boot Modular Wreckers

This is a rubber boot for a control lever on any Century or Vulcan modular wrecker by Miller Industries.

$12.69

Century Car Carrier Hose Tray - 9'

This is a Hose Tray used on 21' bed car carriers by Miller Industries. This hose tray is 9' long x 3.5" wide. The channel where the hose lays in is 2" wide. This hose tray will fit 21' beds from Century, Champion and Vulcan. See Features Below to see which models it will fit. This part can be used to replace Part Number 12-0720283. This part will be cut into three sections in all cases for economical shipment.

$140.99

Wear Pad Kit -10/12S Gen 2

Note: Special Handling Fees Apply

$601.99

Miller Control Cable 104" Century and Challenger Heavy Wreckers

This is a replacement control cable for Century and Challenger Heavy Duty Wreckers. This control cable is 104" long with a 2" stroke. This cable goes between the hydraulic control levers and the valve body. Please see Features for what models this control cable will fit.

$161.99

Miller Rear Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan 6" x 7/8"

This is the rear extend cylinder pin for many light duty wreckers by Miller Industries. This pin will work with most Century, Challenger, Champion, Holmes and Vulcan light duty wreckers. This pin measure 6" long with a diamter of 7/8". To view specific wrecker models this pin fits see Features below.

$31.49

Miller Seal Kit Swing L-Arm Cylinder 12-0303844

This is a replacement seal kit for the swing L-arm cylinder for autoload wreckers by Miller Industries. This seal kit if for cylinder part number: 12-0303844.

$88.99

Miller Wheel Lift Extend Cylinder Century Challenger Holmes Vulcan

This is the Wheel Lift Extend Cylinder on Light Duty Wreckers by Miller Industries. This extend cylinder will fit on the following models. The Century 300 Express Series, The Century 300 Modular Express Series, The Challenger 4300 Express Series, The Holmes 440SL Series, The Vulcan Modular 807, The Vulcan 810 Intruder, The Vulcan 812 Intruder, and The Vulcan 810 Power Tilt. To view part schematics click the Brochure Tab.

$817.99

Century Slider Pad 3" x 2 3/8" x 3/16"

This Slider Pad from Miller Industries is an inner tube slide pad for the bottom side of the wheel lift on Century, Challenger, Champion, Holmes, and Vulcan car carriers and wreckers. The pad measures 3" long, 2-3/8" tall, and 3/16" wide. Please see the brochure tab for a full list of breakdowns.

$13.09

Wrecker Winch Cable Tie Spring Up To 2004

This Miller Industries Winch Cable Tie-Back Spring secures your winch cable hook on heavy wreckers. This spring is used on Century units up to 2004. The spring links to the cable hook using an oblong master link #9048800. It measures 13" long and has a diameter of 1-3/4".

$69.99

Century Wear Pad Kit 10 Series

This is a 36" 10 series wear pad from Miller Industries. 36" long, 1-1/2" wide, 5/16" thick

$63.99

Miller Fold Cylinder Pin Weldment Base End Century / Challenger

This is a replacement base end fold cylinder pin weldment for Century and Challenger heavy duty wreckers by Miller Industries. This is the pin that attaches the base end of the fold cylinder to the underlift tower weldment of the wrecker. This pin fits the Century 1624, 5130/5230, 7035, 9055, the Century CH-32, CH-35, and the CH-45 wreckers. This part can be used to replace Part Number 12-0802220.

$140.99

Miller Sheave, 8" x 1-1/2"

This Sheave from Miller Industries has a diameter of 8" and a rim of 1-1/2". This sheave is used on the Boom Assembly of many Century, Challenger, Holmes, and Vulcan Wreckers. Please see the brochures tab for a full list of assemblies and parts schematics.

$195.99

Century Control Box 5 Spool Passenger Side Right Steel

This is a Miller Industries Control Box hood for the passenger side of any Century/Vulcan Car Carrier prior to 2005 (Excluding LCG). It houses a 5-spool system and is a steel finish.

$216.99

Century Bearing Pad SF 2010 and Up 10S 96"

Note: Special Handling Fees Apply

This is a 96" long subframe bearing pad by Miller Industries. It is one of the replacement pads for a 2010 or newer 10 Series Car Carrier. This part is included in the Bearing Pad Kit 12-0940278.

5/16"x96" Subframe Pad
2010 & Newer 10 Series Car Carriers

$138.99

Century Control Box 5 Spool Driver Side (Left) Steel Prior '05

This is a Miller Industries Control Box hood for the driver side of any Century/Vulcan Car Carrier prior to 2005 (Excluding LCG). It houses a 5-spool system and is a steel finish.

$230.99

Miller Control Knob Red Cable In / Out

This is a Miller Industries Control Handle Knob. It is red in color and is labeled Cable "In/Out" for winch operations. This knob is used on many light duty wreckers as well as car carriers. See Features below to view specific models or click on the Brochure tab to view the part schematics.

$24.19

Century Seal Kit 20 Series Century Holmes and Champion W/L In / Out

This seal kit fits, Century, Holmes, and Champion Wheel-lift In/Out cylinders afer December 2002. It is a universal kit that will fit Texas (marked TH) ot Green manufactures cylinders. Please remember that seal kits may fit different c ylinders of the same diameter. See the chart below for more information. This part can be used to replace Part Numbers: 12-0308388 and 12-0308896.

$143.99

Century Control Handle 8" Green

This is a replacement control handle for the new Miller Car Carriers. It is Green in color, and measures 8" long.

$41.09

Century Bed Pivot Pin 38" x 1.25" Century / Challenger / Champion / Holmes / Vulcan

This is a Bed Pivot Pin from Miller Industries that is used on the bed of car carriers. It measures 38" long and has a diameter of 1-1/4". This Pivot Pin is used in the tilt frame assembly of many Century, Challenger, Champion, Holmes, and Vulcan Car Carriers. Please see the brochure tab for a list of breakdowns.

$86.99

Century Bearing Pad In / Out Boom LCG

This is an inner & outer tube bearing pad for the wheel lift of a Century or Vulcan LCG Series car carrier. There are a total of 4 bearing pads for each equipped wheel lift. See Features for which years/models they are used on.

$22.39

Miller Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan

This is the front extend cylinder pin for the wheel lift extend cylinder on Miller Industries Light Duty Wreckers. It replaced part number 12-0703345. To view what models this pin fits on please see Features below. To view part schematics click on the Brochures tab.

$43.19

Century Bed Tilt Cylinder 3" Bore x 16.25" Stroke

Note: Special Handling Fees Apply

This Bed Tilt Cylinder from Miller Industries is designed to withstand the necessary forces and be used at stated pressures. It meets industry and government specifications, so it will prove itself when the job really matters. It is used on the assembly of many Miller Car Carriers, including Challenger, Century, Champion, Holmes, and Vulcan. See the features below for a full list of carriers and see the brochure tab for breakdowns.

Bore: 3"
Stroke: 16.25"
Standard color is black
Uses Seal Kit 12-0308385
Uses Cylinder Pin 12-0702434
Uses Snap Rings 12-0301642

Fits:
Century 10 Series Carriers
Century 20 Series Carriers
Century 30 Series Carriers
Challenger Car Carriers
Champion 19'-21' Carriers
Holmes 10 Series Carriers
Vulcan 10 Series Carriers
Vulcan 10 Series Extreme Angle Carriers

$814.99

Century Boom Wear Pad 1/2" x 1" x 4"

Miller Industries wear pad for the wrecker boom.

$51.99

Century Slide Pad Boom Bottom 15" x 3" Wreckers

This Boom Bottom Slide Pad from Miller Industries is 15" long and 3" wide. It is used on the Boom and Outrigger Assembly of Century and Challenger Wreckers from Miller Industries. Please see the features below for a list of Wreckers and see the brochure tab for breakdowns.

$78.99

Century Wheel Lift Outer Tube Pad Shim Holmes / Vulcan

This is the outer tube shim pad for the side, inside of the wheel lift by Miller Industries. This Shim Pad will fit the following wreckers: Century Modular Express 300 Series, Modular Midnight Express, Modular 400 & 600 Series, Holmes 440SL, Vulcan Modular 806, Modular 807, 812 Intruder, and Modular 880/890. See Brochures for reference chart and Features for related hardware. Each pad sold separately.

$6.89

Miller Wheel Lift Extend Cylinder

Note: Special Handling Fees Apply

This Wheel Lift Extend Cylinder from Miller Industries is used on the Hydraulics Assembly of several Miller Car Carriers. These include Century, Challenger, Champion, Holmes, and Vulcan Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

Overall Dimensions: 72" x 3" x 3"

Hole Sizes: 1" and 3/4"

The other overall length of one side 5" x 3"

Other side 6" x 1 1/2"

Standard color is black
Uses Seal Kit 12-0306134
Fits:
Century 10 Series Steel & Aluminum Carriers
Century 15 Series Steel & Aluminum Carriers
Century LCG 12 Series Steel & Aluminum Carriers
Century LCG 16 Series Steel & Aluminum Carriers
Challenger Car Carriers
Champion Steel & Aluminum Carriers
Holmes 10 Series Steel & Aluminum Carriers
Vulcan 10 Series Steel & Aluminum Carriers
Vulcan 10 Series Extreme Angle Steel Carriers

$1,175.99

Century Control Black Blank Knob

This is a Miller Industries Control Handle Knob. It is black in color and is used on a 2005 or older Series car carriers.

$10.39

Miller Control Knob Black Boom Up / Down

This is a Miller Industries Control Handle Knob. It is black in color and it is labeled Boom "Up/Down" for the wrecker boom operation. This control knob will work on most light duty wreckers by Miller Industries. To see which specific models this knob will fit please see Features below. To view the part schematics click on the Brochure tab.

$14.99

Miller Wheel Lift Extend Cylinder Base Pin Century Holmes Vulcan

This is the Wheel Lift Extend Cylinder Base End Pin for Century Modular Midnight Express and Modular 211's. This pin also will fit Holmes 440SL, Vulcan Modular 804, 806, and 807 wreckers. It will also work with the Vulcan 810 Power Tilt light duty wrecker by Miller Industries. To view specific models see Features below. To view part schematics click the Brochure tab.

$37.79

Miller Wheel Lift Tilt Cylinder Upper Arm Pin Century Holmes

This is a Pin that is used in different locations on the Wheel Lift of Century Formula I Duplex Tilt 411 & 412, and Holmes 440 Series / DFT 400 light Duty wreckers by Miller Industries. This pin is used to hold the tilt cylinders on to the wheel lift frame weldment. This pin also is used to attach the upper arm weldments to the wheel lift frame weldment also. To view part schematics click on the Brochure tab.

$99.99

Miller Wheel Lift Fold Cylinder 2.5" Century Holmes Vulcan

This is a 2.5" Wheel Lift Fold Cylinder on Century Modular Midnight Express, Holmes 440SL and Vulcan 810 Intruder light duty wreckers. To view specific wrecker models please see Features below. To view part schematics click on the Brochure tab. This part can be used to replace Part Number, 810700000.

$1,088.99

Miller Boom Lift Cylinder Pin Century Challenger Champion Holmes

This is a clevis pin that attaches the boom lift cylinder to both the boom and the wrecker itself. This pin is used to attach boom lift cylinder IT27B on Century 300 Express Series, Century 211 & 212, Challenger 4300 Express Series, Champion 101 Series, and Holmes 440 Series. To view part schematics Click on the Brochures tab.

$59.09

Century Bearing Pad 6 3/8" x 4" x 3/8"

This Bearing Pad from Miller Industries is used on the outer boom of wheel lift and slide-in tire restraint assemblies of Miller Car Carriers. These include Century, Challenger, Champion, Holmes, and Vulcan Carriers. The Bearing Pad measures 6-3/8" long, 4" tall, and 3/8" thick. Please see the brochure tab for a list of breakdowns.

$48.79

Century Pin, Pivot W/L Boom Hinge 1.23

This is a Miller replacement pivot pin, W/L boom hinge 1.23. Carrier 38 x 1-1/4.

$117.99

Century Autoloads Pivot Pin Weldment

This is a replacement pivot pin for Century and Holmes Autoload wreckers by Miller Industries. This pivot pin will fit the Century Modular Midnight Express, Holmes 220 Snatcher, and 440SL light duty wreckers. To view part schematics please click on the Brochures tab.

$247.99

Century Control Handle Pivot Rod 5 Spool

This is a Miller Industries control handle pivot rod on a 5-spool control assembly.

$45.09

Century Swing L-Arm Pivot Pin Weldment

This is a Pivot Pin for the Swing L-Arm on a Wheel Lift Assembly. It is from Miller Industries.

$97.99

Century Bed Tilt Cylinder Century 10 Series and LCG

Note: Special Handling Fees Apply

$914.99

Miller Nylatron Bearing Pad

These are the wear pads for the inner and outer booms of the wrecker. These Wear Pads will fit the following wreckers by Miller Industries: Century Express 300 Series, EB4 Express, EB4 6500, Modular Express 300 Series, Formula I, Duplex Tilt 411 & 412, Formula 6500 - 600 Series, Midnight Express, Challenger Express 4300 Series, 4700 Series, 4800 Series, Holmes 440 Series, DFT 400, HP 552, DFT 650, and Vulcan Modular 806 and 807. See Brochures for reference chart . Each Wear Pad sold separately.

$6.69

1 - 60 of 322 items

Equipment and Trailer Parts