Lighting | Work Truck & Safety Illumination

Sort by

Miller Tail Light Face Plate Horizontal Lights Horizontal Right LCG Gen II Series

This is a stainless steel tail light face plate for the right hand side of the Century Generation II LCG car carriers. The light configuration for this bezel is horizontal. Does not include lights or license plate mounting hardware as pictured in photo. All that is included is the stainless steel face plate.

$148.99

Miller Tail Light Face Plate Horizontal Lights Horizontal Lights Left LCG Gen II Series

This is a stainless steel tail light face plate for the left hand side of the Century Generation II LCG car carriers. The light configuration for this bezel is horizontal. Does not include lights or back up alarm pictured in photo. All that is included is the stainless steel face plate.

$148.99

Miller 3" Control Light New Style LCG Gen. 2 Car Carrier

This is a replacement control light used on the LCG Generation 2 Car Carriers.

$11.29

Miller LCG Control Light Mounting Bracket

This is a LCG carrier control light mounting bracket from Miller Industries.

$19.09

Miller Tail Light 6" Oval Red LED

6" Oval red LED light. These lights will be standard on heavy duty units.

$40.29

Miller Loop Harness 20' and 21' Car Carriers

* (2) hydraulic hoses for the winch* Wiring harness for the light bar* Pre-assembled* 3/8" thick.

$421.99

Miller Industries 15" Slim LED Light Bar

This light has a clear lens and red led's

$54.99

Miller Flex LED Lamp Kit

This LED Flex Lamp Kit can be used with the rear fenders of a large Century or Vulcan wrecker body.

$168.99

MILLER LED 2.5" Red Marker / Clearance Light

This 2.5" round LED light can be used as either a clearance or side marker light. This light is featured on the 12 Series LCG Car Carrier's Tail Light Panel, (See Parts Schematic, Section VI-12, Reference Number 7). These lights feature a reflectorized lens which eliminates the need for a separate reflector to meet DOT requirements. A sonically sealed, waterproof lens and housing are combined into a single unit. Lights accept industry standard 2-prong plug for easy retrofit of incandescent lights. A mounting grommet and plug are required for complete installation. This part can be used to replace Part Number 12-0303125.

$16.39

Miller LED License Light w/ Black Bracket

This is a Miller light, LED license, it has a black bracket.

$37.19

Miller Tail Light Housing Car Carriers Right Side

This Miller Industries product is the right hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the right hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801574.

$168.99

Miller Optronics LED Marker / Clearance Light 2.5" Amber

This 2.5" round LED light can be used as either a clearance or side marker light. These lights feature a reflectorized lens which eliminates the need for a separate reflector to meet DOT requirements. A sonically sealed, waterproof lens and housing are combined into a single unit. Lights accept industry standard 2-prong plug for easy retrofit of incandescent lights. A mounting grommet and plug are required for complete installation.

$16.39

Miller Tail Light Housing Car Carriers Left Side

This Miller Industries product is the left hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the left hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801573.

$166.99

Miller Vulcan Carrier Tail Light Face Plate Horizontal Lights Right Hand LCG Series Stainless Steel

This is a Miller Industries tail light face plate for the Right hand side of any LCG Car Carrier. It is available in stainless steel. The light configuration is horizontal.

$148.99

Miller Tail Light Mounting Plate Stainless Steel Right Hand

This is a stainless steel tail light mounting plate for car carriers. It is for the right hand side of the tail light assembly. The mounting holes are cut out vertically, to allow your tail lights to be mounted vertically. This part can be used to replace Part Number 12-0720031.

$176.99

Miller Tail Light Mounting Plate Stainless Steel Left Hand

This is a stainless steel tail light mounting plate for car carriers. It is for the left hand side of the tail light assembly. The mounting holes are cut out vertically, to allow your tail lights to be mounted vertically. This part can be used to replace Part Number 12-0720030.

$235.99

2.5" Round Marker Light, Amber

This is a light marker amber 2.5" diameter round.

$16.39

Miller Industries 15" Slimline LED Lightbar

This light has a red lens and red led's

$73.99

Miller Tail Light Grommet 96500 and 95500

This tail light grommet fits the Century and Vulcan 16 Series LCG '09 to '14.

$7.99

Miller Marker Light Flasher Control Kit

This Flasher Control Power Unit from Miller Industries flashes all marker lights on the wrecker body. The five wire hookup requires LED lights- 10A maximum.

$895.99

Miller Mini-Lens

This is a mini-lens rear of carrier.

$13.19

Miller Tail Light Assembly - Left

This Miller Industries product is a full assembly of the left side tail light for a car carrier.

$840.99

Miller LCG Right Hand Tail Light Assembly

This Miller Industries product is a full assembly of the right hand side of a tail light section on a car carrier. It is designed for Century or Vulcan LCG Series (1st Generation 2013 and older). It includes all the neccessary parts to replace the entire tail light section. This product bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information.

$859.99

Miller Light Bar Fold Down Bracket

This is a set of replacement light bar fold down brackets by Miller Industries.These brackets will fit the tube style pylons for small wreckers. To shop forthe replacement pin this bracket uses, click

$1,545.99

Carrier License Plate Light

Compact license plate light with a polished chrome-plated housing, a mounting gasket and a replaceable bulb.

$11.99

Small 55 Watt Work Light

Low-profile, 55-watt halogen auxiliary driving light features powder-coated metal housing and blue-tinted lens. Kits include two lights, wiring, illuminated rocker switch, and installation instructions.

$72.00

Miller License Plate Light Assembly

Tail lamp license assembly with license plate bracket & light.

$39.22

MILLER TAIL LIGHT ASSY,CHEV(RH) G2

$749.99

Miller Glow LED Strip - 206"

Miller Industries provides a replacement glow LED strip for century vehicles.

$1,298.99

Miller Work Lights, Swivel, Black, Pair

Miller Industries Swivel Work Light. This light comes as Factory Black. Sold as Pair.

$396.99

Miller Stop / Turn / Tail Light (Holmes Protech Body)

Rectangular Stop/Turn/Tail Light for Holmes Protech style body. (Uses 1 left and 1 right per side of truck.)

$18.69 – $18.79

MILLER LCG TAIL LIGHT MTG ANGLE LH

$78.99

Miller Wire Harness Tail Light

Can't find where the broken wire is to your taillights? Replace the wiring with this harness from Miller Industries. This part can be used to replace Part Nos.: 12-0301803 and 12-0301804.

$410.99

Miller Under Body LED Strip Light Kit

This Under Body LED Strip Light Kit from Miller Industries comes with a set of six Strip Lights.

$434.99

Miller LED Marker Light, Red

This Red LED Marker Light from Miller Industries is used on Century, Century LCG, Champion, and Vulcan Car Carriers. The light measures 5-1/2" long and 1" wide. It also comes with a gasket, pigtail and bulb.

$24.59

Miller Side Marker Light, Amber LED, 2.5"

$54.99

Miller Steel Pylon Fold Down Light Bracket

This Fold Down Light Bracket for steel Pylons is from Miller Industries. When your light bar height is preventing you from entering parking ramps or garages, the fold down light bracket will provide the solution. This bracket bolts to your light pylon and light bar and allows the operator to pull a spring loaded rod to release the hinged bracket and tip the light bar backwards for additional clearance.

$491.99

Miller Tail Light Screw 8-32 x 3/4"

Used to install 12-0302542 & 12-0302542 Lights on Miller Wrecker Bodies

$6.89

Miller Light Side Marker Red Led 2.5

$32.39

Miller LED Dominator Windshield Lights - Pair

The small size and fully waterproof design makes the Dominator Series the versatile answer to all your secondary warning and signaling needs. This light is compact enough for special use vehicles, motorcycles, quads and marine applications. This small but powerful light is the solution to your unique warning light requirements. This light has white and amber flashing lightheads. This light is also ran off of a 12 Volt DC power source.

$2,105.99

MILLER RH TAIL LIGHT COVER PANEL

$144.99

Miller Under Body LED Strip Light Kit

This Under Body LED Strip Light Kit from Miller Industries comes with a set of six Strip Lights.

$434.99

Miller LCG Left Hand Tail Light Assembly

This Miller Industries product is a full assembly of the left hand side of a tail light section on a car carrier. It is designed for Century or Vulcan LCG Series (1st Generation 2013 and older). It includes all the necessary parts to replace the entire tail light section. This product bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information.

$788.99