Straps, Chains and Slings

This 5' Trailer Plate and Frame Rail Chain is from B/A Products. This exclusive chain assembly is available as a single or a set of 2 chains that each feature a flat throat hook at one end and a grab hook at the other. This chain assembly has a working load limit of 15,000 lbs. per assembly. This flat hook can be used to hook directly into a frame rail or trailer plate pocket unlike a grab hook that is required to be hooked back into a chain.

This Keyhole Plate from Miller Industries has a Double Banjo Eye that will provide an additional tie-down point. The keyhole plate can be bolted or welded into place. This plate is 5-7/8" x 7-1/2" x 3/8" thick steel that will accept up to 3/8" chain. This part can be used to replace Part Number 12-0720078. Bare Steel.

Underlift Tie-Down Straps will give you a secure tie-down and help you avoid damage that is commonly associated with chain straps.

Underlift Tie-Down Straps will give you a secure tie-down and help you avoid damage that is commonly associated with chain straps. These straps can handle 7,500 lbs. per strap.

Bolt on Banjo Eyes make it easier to replace worn or broken chain tie downs. Used on aluminum or steel car carrier beds. Galv

Banjo Eyes provide Additional Tie Down Points

This Keyhole Plate from Miller Industries has a Banjo Eye that will accept 3/8" chain. This keyhole plate is perfect if you need to add a tie-down or replace an existing tie-down. This keyhole plate can be bolted or welded into place. This plate is 3-1/2" x 3-1/2" x 5/16" thick steel that will accept 3/8" chain.

Please Note: Product Discontinued - ALL SALES FINAL!
Discontinued items are not eligible for return. View Returns Policy
Crosby Eliminators combine selected features and functionality of a master link, connecting link, grab hook and adjuster legs to provide you with one fitting that is suitable for applications that require an adjustable length chain sling.

• Forged Alloy Steel that is quenched and tempered
• Innovative two piece design allows for maximum flexibility
• Individually proof tested with certification
• If properly installed and locked it can be used for personal lifting applications and it meets the intent of OSHA Rule 1926.1431 (g)(1)(i)(A) and 1926.1501 (g)(4)(iv)(B)
• Suitable for use with Grade 100 and Grade 80 Chain
• Engineered to accommodate optional locking pins that can be inserted to "lock" the shortened chain legs into place
• Fatigue rated at 1-1/2 times the working load limit at 20,000 cycles
  
  Available in the following sizes
  
  

  Item #	Size	Length
  124004153	3/8"	10'
  124004155	1/2"	12'
  124004588	1/2"	16'

Miller Industries Alloy Screw-Pin Shackle Kit replaces 124002706; components will only be sold in kit form.

This heavy-duty chain tie-down kit from Miller Industries works with Miller's newly redesigned dual-hole fork receiver kit for heavy-duty tow operations. The kit includes one (1) T-handle ratchet binder with grab hooks and two (2) Grade 70 chain sections with a pear link at each end.

This 9" Rubber Strap from Miller Industries is used on the Wheel Lift and Tire Restraint Assembly of Century, Champion, and Holmes Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

Oblong Master Link. Use this link to build assemblies that meet application needs and requirements.

One 3" bus lift strap. This part can be used to replace Part Number, 9048493.

This is a Car Carrier Approach Plate Kit from Miller Industries. It comes with four plates, and all of the hardware to attach. This hardware includes bolts, nuts and washers. The kit is used on aluminum or steel car carriers and it makes it easier to replace worn or broken chain tie downs.

Miller Chain Storage Rack for Heavy Duty Wreckers. Fits all Vertical Compartments on Century & Vulcan Integrated and Rotator Wrecker Body Sides.

This Spreader Bar Rigging Kit by Miller Industries will insure you have the correct rigging to use with the Miller 20 Ton Spreader Bar Kit. This kit includes (3) 1.5" Crosby Screw Pin Shackles, (2) 1.25" Screw Pin Shackles, (2) 5' Orange Endless Loop Straps, and (2) 10' Blue Endless Loop Straps. This kit will accommodate the rigging of one spreader bar.

Double Banjo Eyes provide additional tie down points.

Chevron Wrecker Anchor Shackle

This is a blue basket strap with a T-hook from Miller Industries.

1/2" grade 100 chain sling foundry hook set. Includes 2 Screw Pin Shackles.

This Tie-Down Strap from Miller Industries is used on the Wheel Lift Assembly of Century 20 Series Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This Heavy Duty Chain Kit from Miller Industries is for all of your rigging and recovery needs with Heavy Wreckers, but it also has many other uses as well. The kit includes 5/16" and 3/8" Grade 80 Chain, 1/2" Grade 100 Chain, and two 5/16"-3/8" Grade 100 Ratchet Binders. These chains offer high working load limits and are certified for overhead lifting.

Bolt-on Deck D-Rings from Miller Industries. These D-Rings can be mounted in custom locations on the deck of a car carrier. Sold as Each.

To secure exotic and low-profile cars, Miller Industries introduced the Miller Pro Pack Four-Wheel Tie-Down Kit. The kit includes straps that pass through the rims, and is the preferred method of most towers who haul high-end vehicles. This kit was designed specifically for Miller Industries and includes four ratchet assemblies with chain tails, four wheel straps and four fleece sleeve protectors with foam padding and VelcroT closures. A small duffel bag is also included for protecting and storing the components when not in use. The duffel and the straps are all embossed with the Miller Industries logo. This kit provides a fast, safe and convenient way to provide a four-point tie-down while still protecting the finish on expensive rims.

The rounded design of our 5/8" anchor shackle allows it to take loads from many directions without developing significant side load. The larger loop shape is also able to handle smaller straps.

This Chain Rack Carousel provides the ideal storage solution for keeping your recovery chains organized and easily accessible. It is designed to be mounted in the 30", 36" or 48" saddle tunnel box on your Century rotator or heavy duty. The chain carousel allows you to hang your chains on one of the two top circular chain rings while the chains stay separated in six different pockets. The pockets feature drain holes to allow you to wash down your chains as they hang. By releasing the locking plunger pin the carousel easily rotates on a sealed bearing for easy access to all your chains.

This is a 5/8", Grade 100 chain kit by Miller Industries. This kit includes (2) 10' long chains and (2) 15' long chains. Both sets of chains have grab hooks on each end.

Miller Industries Endless Loop Sling Package. This kit contains the following: 2 - Blue ARS 240 x 16', 2 - Red ARS 150 x 8', 2 - Red ARS 150 x 12', 2 - Yellow ARS 90 x 4', and 2 - Yellow ARS 90 x 6'.

This Chain Rack Carousel provides the ideal storage solution for keeping your recovery chains organized and easily accessible. It is designed to be mounted in the 30", 36" or 48" saddle tunnel box on your Century rotator or heavy duty. The chain carousel allows you to hang your chains on one of the two top circular chain rings while the chains stay separated in six different pockets. The pockets feature drain holes to allow you to wash down your chains as they hang. By releasing the locking plunger pin the carousel easily rotates on a sealed bearing for easy access to all your chains.

Note: Special Handling Fees Apply

Miller Chain Rack for 36" Saddle Tunnel Box. Designed specifically for installation in a 36" tunnel tool compartment for the Century or Vulcan Heavy Duty Wrecker line. Used with "roll-up" style doors.

• Fits Miller Roll-up Tunnel Box

Miller Chain Rack for 48" Saddle Tunnel Box. Designed specifically for installation in a 48" saddle tunnel tool compartment for the Century or Vulcan Heavy Duty Wrecker line.

This Transport Chain Kit from Miller Industries can help you with all of your tie-down needs. This kit comes with a variety of 5/16" and 3/8" Grade 70 chains with two lever binders.

This 9" Rubber Strap from Buyers is used on the Wheel Lift and Tire Restraint Assembly of Century, Champion, and Holmes Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.