Tools and Equipment

Zip's snatch blocks with a swivel shackle and 30 inches of chain provide versatility for tow operators at a recovery scene. The combination chain, snatch block and grab hook help change the direction of the tow or gain an advantage over the disabled vehicle. See the drop-down menu for available sizes and working load limits.

Zip's high-quality, low-cost snatch blocks are available in four rope sizes with working load limits up to 30,000 lbs. These blocks also feature a spring-loaded latch that adds a layer of safety to the recovery scene. See the drop-down menu for available sizes and working load limits.

Zip's Plastic Window Wedge works in tandem with Zip's Inflatable Air Wedge and most door tools. The tapered plastic design maintains the gap created by the air wedge between the window and door frame and clears the way for the insertion of most long-reach door tools.

Prevent the front wheels of a towed vehicle from turning while towing from the rear with this steering wheel lock from Zips. The strap is equipped with two coated claw hooks to latch onto the steering wheel and the brake pedal. A ratchet buckle cinches the two ends tight.

Zip s Inflatable Air Wedge creates the necessary gap to insert door tools between a vehicle s window and door frame. An internal stiffener keeps the bag rigid, making it easy to slide over tight weather stripping. A small manual pump and push-button release valve allows for one-hand operation.

When recovering a vehicle with a car carrier rollback, the Zip's Side Puller Recovery Tool allows your truck to remain parallel with the road and keeps traffic flowing, taking up less roadway with winch angles off the rear of the deck. The Zip's Side Puller Recovery Tool has a unique design that allows the operator quick and easy usage - no installation labor required! It can be locked into position utilizing the standard key slot holes along the rear approach plate on all Miller Industries 10, 12 and 16 Series STEEL car carriers. It is secured in place with a hitch pin and hairpin cotter pin.

Note: Special Handling Fees Apply

The life of a tow truck operator is a tough and dangerous one. Physically demanding, close to high-speed traffic, and never entirely sure what could go wrong. Every tow truck operator deserves as many conveniences as possible. This is why we made the Self-Loading Dolly Mount. This handy tool helps make their day a bit safer, a bit easier, and a bit better.

Able to load and unload dollies quickly and efficiently, you can rely on the Self-Loading Dolly Mount. This shock assisted mount allows the tow truck operator to load dollies from their power zone, the optimal lifting position for users that eliminates back and shoulder strain. Additionally, it eliminates side frame and truck bed damages from impacts with the dollies. To absorb these benefits, operation is a breeze. To pull the mount down, engage the release handle and gently pull back on the dolly. The dolly will float down to the operator with shock assistance. To mount or dismount the dolly, engage the cup latch on the tilt cup. This will open the tilt cup or lock the tilt cup into place. Lastly, pull the release handle and guide the mount back up as the shock assistance takes away all the lifting. For one last securing method, insert the latch pin to prevent the dolly side frame from falling in transit. It's that easy!

Additionally, it also protects tow truck operators and their equipment by preventing them from getting on the bed of the truck, especially trucks with high beds. No need to worry about slipping or falling off, as you can stay in one spot on the ground while it loads. Plus, like previously mentioned, its lock pin/latch mechanism prevents the dollies from falling down in transit, preventing damage to the side of your vehicle and the dollies. More importantly, it eliminates the chances of an accident caused by an unstable mount. By locking it in place, the tow truck operator can feel safe knowing it won’t cause any problems on the road.

Another great feature of the dolly mount is that it’s designed to fit most dollies. With it's adjustable wheel mount brackets for both 4.80 and 5.70 sized tires, this mount ensures you can easily integrate into your specific system. Plus, with how easy it is to use, it will speed up any job you’re on. Why wouldn’t you want this on your truck?

• Sold as a Pair
• Easy unloading, restowing, and mounting
• Steel construction
• Adjustable wheel mounting brackets to accommodate both 4.80 and 5.70 size tires
• Pull Down Mount: Engage release handle and pull back on dolly--dolly floats down to operator with shock assistance
• Dollies Off/On: Release cup latch to remove dolly from tilt cup or release and lock cup latch to mount dolly onto tilt cup
• Lift Up Mount: Pull release handle and guide dolly up with shock assistance
• Shock spring does all the heavy work (no more heavy lifting)
• Holds dollies on the bed of a truck
• Latch/pin/lock for securing
• Compatible with most dollies including In The Ditch and Collins
• There is a spacer that can be removed to accommodate the bigger tube on the ITD dollies
• Dolly retrievable in the power zone
• Compact set up
• Great for trucks with higher beds
• Replacement shock # BP-3023460

Protect your equipment from wind and weather with the Turbo Saver. High speed winds can cause the turbo blades to spin and, due to a lack of lubrication, the bearings can be ruined. With the Turbo Saver the wind cannot turn the turbo. The Turbo Saver eliminates the need to use duct tape or rags in the exhaust pipe and is reusable. The Turbo Saver Exhaust Cover is great for transporting equipment.

These Axle Forks from Zips have a 2" wide opening. This new design features a shorter and tapered front lead fork to more easily get under a front axle eliminating the need for a double pick. It also has a tighter distance between the forks to grab the axle. The extra width reduces side-to-side movement and will fit most heavy steer axles. These forks are sold as a singles or Set of 2. 

Add versatility to the Autogrip autoloader on your Chevron Autogrip Wheel Lift with Zip's custom receiver hitch adapter. Powder-coated safety yellow for easy identification, this bolt-on bracket allows you to move and tow trailers as needed at an incident scene. With a towing capacity of 8,000 lbs., this welded 2" receiver enables your wrecker to tow bumper-hitch campers, toy haulers and other light-duty trailers as needed.

Zip's Cam Locks have a plunger and spring design that is easier and more reliable to use than the old style locking pins. Allows for one hand operation to open the assembly and put it into the automatic locking positions. The pin will fully engage once the holes in your bar line up. Used on sling arms, stabilizer legs, wheel lift forks and more.

Increase the versatility of your Miller Chevron 408 Gen II Auto Grip with this set of bolt-on Fork Receivers from Zip's. Featuring a capacity of 4,000 lbs. as a set, this pair of welded steel adapters offers three fork positions, which allows the tow operator to set forks where needed. By improving the functionality of the wrecker, a tow company is able to handle a larger variety of calls, thereby increasing profits and seeing a return on their investment.

Miller Industries has already increased the versatility of heavy-duty wheel lifts with its pintle hook adapter. Now, add more functionality to the back end of your wrecker with Zip's Gooseneck Trailer Adapter. With an included 2-5/16" ball, this improved gooseneck adapter replaces the pintle hook on Miller's original wheel-lift adapter. This universal attachment allows the operator to tow and relocate cargo, flatbed, livestock and other trailers with this style of connection.

Note: Special Handling Fees Apply for Specific Items

This multi-purpose towing adapter from Zip's provides heavy-duty tow operators the versatility and flexibility to tow a variety of trailers with their underreach. Available in a seven-piece kit, the adapter stores easily and works with four different trailer attachments to pull anything from campers and horse trailers to pup dollies and gooseneck flatbeds. They are designed to fit on Miller units with Miller fork receivers. The max fork receiver depth to put in pin is 3 1/2".

Strong and durable, this welded steel adapter is powder-coated safety yellow for easy identification. To install, insert the two vertical 2" pins on the bottom of the adapter into standard fork receivers on the underlift's crossbar. The main pins are then secured in place with two retaining pins, which include two cable lanyards so they won't get misplaced.

Four attachments for this adapter are available for purchase separately or sold in money-saving kits with the adapter. Bolted on the side or pinned on top, these brackets include a pintle hook with a 2-5/16" gooseneck ball, a fifth wheel plate and a kingpin. Scroll down for more information on each attachment kit, and order the one you need from the drop-down menu top right.

Please note when using these attachments, it is important to not exceed the rated towing capacity of your wrecker's underreach and to follow the manufacturer's capacity rating tag. All attachments should be used in combination with tie-down chains for safe and road-worthy travel.

All attachments can be easily stored in a side storage compartment on a wrecker. When installed properly, the attachments sit proud of any obstructions on the adapter and allow for a wide turning radius, which makes for better maneuvers in traffic and around corners.

All steel parts feature a corrosion-resistant finish to extend the life of the adapter. Additional components and hardware are zinc-plated to further promote long-lasting performance, making this adapter a one-time purchase for any heavy-duty operation. This kit is a great alternative from the Miller Industries Heavy Duty Hitch Attachment Kit.

Zip's HD Tow Attachment Locking Pin not included in ZP-2211-1 or ZP-2211-2

Buy Separate A La Carte:
Buyers 15 Ton Pintle Hook - #PH15 - Capacity: 30,000 lbs

Zip's King Pin Attachment - #124001948Z

Zip's Fifth Wheel Plate Attachment - #ZP-1833 - Capacity: 24,000 lbs

Zip's Heavy-Duty Gooseneck Trailer Adapter Kit - #ZP-202-690-KIT - Capacity: 20,000 lbs

Zip's Fifth Wheel Retaining Pin - #VA0661Z

Zip's HD Tow Attachment Locking Pin - #VA0662Z

Zip's Retainer Pin Assembly - #12-0902378Z

Master Kit
The Master Kit for Zip's HD Underreach Towing System includes the main underlift adapter as well as all four attachments: the gooseneck bracket and 2-5/16" ball, a pintle hook attachment, a kingpin attachment and the fifth-wheel plate adapter. All hardware is also included, such as attachment pins, retaining pins and four bolts.

This kit offers operators everything they need to tow a variety of fifth-wheel and gooseneck trailers - such as campers and livestock trailers. The pintle hook allows a connection to combination dollies from double/triple semi configurations, and the kingpin adapter enables rear picks on bobtail semi tractors when used with fork holders in the recommended position.

Pintle Kit
The Pintle Kit for Zip's HD Underreach Towing System includes the main underlift adapter as well as all as the pintle attachment and four mounting bolts. Bolted to the front of the adapter, this attachment allows heavy-duty tow operators to recover semi trailers with pintle hooks, such as double/triple combinations common to the LTL and foodservice industries. When using the pintle hook attachment, do not exceed the maximum gross trailer weight of 30,000 lbs. or the maximum vertical weight rating of 6,000 lbs.

Kingpin Kit
The Kingpin Kit for Zip's HD Underreach Towing System includes the main underlift adapter as well as all the powder-coated kingpin attachment. Pinned to the top of the adapter, this attachment allows heavy-duty operators to safely tow a bobtail semi from the rear.

To complete the hookup, the towing adapter and fork receivers first need to be rotated a quarter turn on the underreach's crossbar. The kingpin attachment is then inserted between the two supports and held in place with a 2" zinc-plated locking pin.

At this point, the kingpin should be facing the ground. The underreach is then lifted high enough to clear the tractor's frame, allowing the kingpin to slide into the fifth wheel. Prior to towing, the assembly should be secured to the frame with tie-down chains to the crossbar's endcaps with welded grab hooks. The fifth wheel jaws should also be locked around the kingpin attachment.

Fifth Wheel Kit
The Fifth Wheel Kit for Zip's HD Underreach Towing System includes the main underlift adapter as well as the fifth wheel attachment. This powder-coated attachment is pinned to the top of the adapter with a locking pin, and once hooked to the trailer, another 1-3/8" zinc-plated pin holds the kingpin in place.

This attachment works great for pulling campers, flatbeds, livestock and other recreational trailers with kingpins. This adapter can also be used to tow 53' semi trailers, but due to excess weight considerations, the trailer should be empty. Also, due to the 14" diameter of the fifth-wheel plate, please exercise caution when pulling this high-profile unit, especially with strong crosswinds. For comparison, a semi's fifth wheel plate is typically 35" wide.

Gooseneck Kit
The Gooseneck Kit for Zip's HD Underreach Towing System includes the main underlift adapter as well as all the gooseneck bracket and 2-5/16" ball. This powder-coated attachment bolts to the same four holes as the pintle hook attachment and offers a rated towing capacity of 20,000 lbs.

• Welded construction
• Powder coated safety yellow
• Rectangular main tube
• 3/4" plate steel
• Oblong loop handles
• 1-3/8" attachment pin hole
• 2" fork holder pins
• Retaining pins w/ cable lanyard
• Four bolt pintle location
• Locking pin included

Tow a variety of light-duty and recreational trailers with your Miller car carrier with this convenient receiver kit from Zip’s. The powder-coated bracket bolts on to the crossbar of your carrier’s wheel lift and will fit any 10 Series, 12 Series LCG or 16 Series LCG Gen II Miller car carrier models built after September of 2016.

Zip's high-quality, low-cost snatch blocks are available in three rope sizes with working load limits up to 16,000 lbs. These blocks also feature a swivel shackle that increases its versatility at the recovery scene. See the drop-down menu for available sizes and working load limits.

This rough surface broom from Zip's AW Direct effectively sweeps away heavy debris such as gravel, mulch and dirt. The handle extends for longer reach and collapses for convenient storage. The broom s bristles can tackle wet or dry conditions.

Zip's King Pin Adapter allows heavy-duty operators to recover and tow semi trailers equipped with an uncompromised king pin. Made from 1" plate steel, the adapter features a keyhole slot to fit over the king pin and then slide forward, nesting in the machined groove of the king pin . The adapter's front two holes accommodate 1" screwpin shackles, which provide connection points for Grade 80 recovery chain. Attached to fork adapters on the wrecker's underreach, the recovery chain keeps the adapter securely in place and supports the front of the trailer. This adapter allows for safe transport of semi trailers by a heavy-duty wrecker without requiring a second power unit. Purchase individually or as a kit with two screwpin shackles.

Zip's heavy duty rubber wheel chock with chain eyelet for ideal use in many applications.

Zip's Gas & Garbage Can Holder Kit includes a built-in step. To be installed on the front end of an underbody toolbox. Gas Can and Garbage Can NOT included.

Please Note: Product Discontinued - ALL SALES FINAL!

Discontinued items are not eligible for return. View Returns Policy

Note: Special Handling Fees Apply for Specific Items

Zip's Custom Broom or Shovel Holders are constructed of Steel and can be painted black or galvanized. These brackets are designed to be installed along side the control compartments of a Miller Industries LCG 12 & 16 Series or 10 Series Car Carriers. They simply bolt to the bottom side of the car carrier sub-frame. A threaded T-handle screws down to hold the broom or shovel securely in place. The 12 & 16 Series custom holder measures 37.5" between the brackets. The 10 Series custom holder measures 33.5" between the brackets. These holders require you to drill through the subframe to install the brackets.

• Custom built by Zip's
• Choose between the 12 & 16 Series or 10 Series Car Carrier
• Available in Galvanized or Painted finish
• Single or Dual square tubing
• Underside mount
• Subframe drilling required
• Additional Aluminum Mounting Plate not included in kit

Available in the following sizes

Item #	Size	Finish
ZP-CBSH-HOLDER	Single - 10 Series	Painted
ZP-CBSH-10S-DUAL-G	Dual - 10 Series	Galvanized
ZP-CBSH-10S-DUAL	Dual - 10 Series	Painted
ZP-CBSH-LCG-G	Single - 12 and 16 Series	Galvanized
ZP-CBSH-LCG	Single - 12 and 16 Series	Painted
ZP-CBSH-LCG-DUAL-G	Dual - 12 and 16 Series	Galvanized
ZP-CBSH-LCG-DUAL	Dual - 12 and 16 Series	Painted

This Short 4-1/2" Fork from Zips is used to pick up from the leaf spring, axle or frame. These Forks are made from one piece of cast alloy steel that increases the yield strength almost two fold while also making them 30% lighter than the old fork designs. This fork has a 4-1/2" wide opening, a 2" diameter shaft and a 3" clearance between the fork holder and the bottom of the fork cutout.

This is a replacement bulb and valve for the ZDT9 air wedge.

These quality tow dolly mounts from Zip's were specifically designed to be installed on any self-loading wrecker built by Miller Industries. Select from two different item numbers to accommodate either Collins or In the Ditch branded dolly sets. Mounted on the rear slope of the wrecker body for quick and ergonomically-friendly access to the dolly, these brackets are perfect for the serious light duty towing operator. We try to make your life a little easier and safer on the road!

Zip's Built Anchor Spade is a custom-fit accessory designed for Miller Industries 10 Series and 12 Series LCG Car Carriers. This spade fits over the rear bed stabilizer pad of the car carrier. This attachment fits both the Right and Left Stabilizer Leg.

This welded steel fifth wheel plate attachment works with Zip's HD Underreach Towing Adapter and allows heavy-duty wreckers to tow semi trailers, campers and other trailers fitted with a kingpin. Easily installed without tools, the 12-ton weldment attaches to the HD adapter with a 2" locking pin, and 1-3/8" retaining pin secures the trailer's kingpin to the fifth wheel plate. The attachment is powder-coated safety yellow for easy identification and corrosion resistance, and both pins are zinc-plated for further longevity. The versatility of the adapter allows the wrecker to handle more calls, increasing the return on investment and reducing the amount of time on scene.

Zips Snatch Block replacement latch kits. The kits are available in seven sizes. See the drop-down menu for available sizes.

These are a right and left wheel grid storage bracket that mounts to the tailboard of a Vulcan V24 wrecker.

This cast steel alloy Fork from Zips is used to pick up from the leaf spring, axle or frame. Making these forks from one piece of cast steel has increased the yield strength almost two fold while also making them 30% lighter than the old fork designs. This fork has a 5" wide opening, 2" diameter shaft and has a 6-1/4" clearance between the fork holder and the bottom of the fork cutout.

Spacers for use with the Century forks from Miller Industries. This attachment was designed to be used when the front axle you are picking up is narrower than the throat of the fork you are using. Simply slide the adapter over one ear of the fork and you have created 1" narrower opening in your fork without having to carry extra attachments in your tow vehicle. Remember to always use safety chains. Sold as pairs.

This Short 5" Fork from Zip's is used to pick up from the leaf spring, axle or frame. These Forks are made from one piece of cast alloy steel that increases the yield strength almost two fold while also making them 30% lighter than the old fork designs. This fork has a 5" wide opening, a 2" diameter shaft and a 3" clearance between the fork holder and the bottom of the fork cutout.

This 3" Short Fork from Zips is used to pick up from the leaf spring, axle or fame of a truck. These forks are made from one piece of cast alloy steel. This process has made the yield strength increase almost two fold while making the weight almost 30% lighter. The fork has a 3" wide opening with a 2" diameter shaft and a 3" clearance between the fork holder and the bottom of the cutout.

Cast Steel Alloy Forks from Zip's are used when clearance is needed on a vehicle with a low front end. These forks are made in one piece using a special cast steel process. There is a 4-1/2" wide opening at the top of the fork and the shaft has a diameter or 2". There is a 9" clearance between the fork holder and the bottom of the fork cutout. The yield strength has been increased while making them almost 30% lighter than the old fork designs.

Zip's Snatch Block Storage Bracket. Designed specifically for the snatch blocks to be stored by the hook. The bracket can typically store up to 4 blocks at a time. 17.5" Long. Heavy Duty Aluminum Construction. Bolt-on installation.

Prevent the front wheels of a towed vehicle from turning while towing from the rear with this steering wheel lock from BA Products. The strap is equipped with two coated claw hooks to latch onto the steering wheel and the brake pedal. A cam lock cinches the two ends tight.

Cast Steel Alloy Forks, these forks are made in one piece using a special process in cast steel. The yield strength has been increased almost two fold while making them almost 30% lighter than the old design forks.

Free up valuable storage space in your light-duty wrecker body with these surface-mount GoJak dolly mounts from Zip's. The black powder-coated steel rack is bolted to the deck of the wrecker and is angled to account for the slope of the wheel well. The GoJak dollies slip vertically into the welded 2" receiver tubes and secured for transport with two hitch pins.

A big part of towing is being ready for whatever comes your way. With designated storage options, this is a lot easier to do. The Chevron Adapter Storage from Zip's ensures you always have a designated spot for your Chevron adapters, meaning you can bring them along on every job with ease.

This heavy duty wrecker lift fork kit includes 9 sets of cast forks. This is the towing fork kit which comes standard when purchasing a new Century or Vulcan Heavy Duty Wrecker. It provides all the towing fork attachments you need for most towing applications. This kit also includes a set of fork spacers which creates a tighter fit and helps eliminate the forks sliding along the truck axle.

The narrow profile of the GUNI Wheel makes this universal replacement wheel easy to store just about anywhere. A set of four can be neatly stacked in the corner of a shop when they're not in use, or if you desire less lifting and more maneuverability, consider this GUNI Wheel storage cart from Zip's AW Direct.

These are custom GoJak mounts from Zip's. These holders are available either powder coated black or are galvanized. Each bracket will hold up to 2 GoJak's.

Mount tools directly onto your truck for easy access and safe storage with these Quick Fist rubber clamps.

This kit includes four replacement wheels and four replacement casters for GJ6200 GoJak dollies.

This Steering Wheel Lock has a 2" Cam Buckle and a Double J Hook. The 2" Cam Buckle is used to tighten or loosen the straps. The Lasso Style end loops around the wheel and the Double J Hook will hook onto the seat frame, or another solid point, for a secure attachment.

Zips 3" tall fork adapter. Use with 16 ton and larger wreckers.

This new axle cover kit fits the Greyhound buses with a 10 bolt axle hub. It has a raised center for clearance and comes with a plastic spacer to accomodate the longer mounting studs.

This zinc-plated steel replacement pull pin secures the kingpin on fifth wheel plate attachments for Zip's HD Underreach Towing Adapter. The 1-3/8" pin measures 9"L features a 2-1/2" loop handle on one end and a spring retainer clip on the other. A stop pin prevents the pin from sliding through the adapter. Securing the kingpin on the adapter ensures safe towing of a semi trailer or other fifth wheel gooseneck.

This is a Zip's Custom aluminum snatch block and chain bracket. This bracket allows you to customize your toolbox to make you more efficient. This is a simple bolt-on bracket that has a variety of uses. It can hold your snatch blocks, your chains, or both. This bracket is 16" long.

This axle cover kit is for trucks with a Spicer 8 bolt pattern. This axle cover kit is sold as a pair.

These are custom made dolly axle storage brackets that are used to store your dolly axles on the body of your light duty wrecker. These are made specifically for Vulcan 810, 812, and Century 312 Wreckers.

Note: Special Handling Fees Apply

Zip's Aluminum Angle 4" x 4" x 50" long, .375" thick. Use this aluminum angle when towing a road tractor from the rear with your heavy duty under lift or truck hitch.

• Lightweight aluminum angle for use between the frame and hitch chains when towing a truck chassis from the rear with a conventional tow bar
• A great item to have to use under a rollover belt to distribute the load on a box truck or trailer

Zip's 48" wooden recovery stick features an angled end for optimal positioning.

This axle cover kit is for a Mack truck with an 6 bolt pattern. These axle covers are sold as a kit.

This axle cover kit is for trucks with a Rockwell 8 bolt pattern. This axle cover kit is sold as a pair.

Turn your late model Chevron Auto Grip II autoloader into an old school tow truck with this tow bar adapter from Zip's AW Direct. With the L-arms in the stowed position, this welded steel accessory bolts onto the crossbar, and the permanent grab hooks provide a solid connection for a chain sling on the axle or other lashing point.

This Pintle Hook Receiver Kit from Zip's is used on Miller Car Carriers. Utilizing the Miller Reese Receiver for Car Carriers (part #

Welding Glove Holder Bracket.

This is a Zip's Custom air hose and jumper cable storage hanger. This hanger is used in our road service body application. It is mounted on the inside of the doors to store hoses or cables. This hanger can be used in many more applications as well.

This is a 1 gallon jug bracket for waterless hand cleaner from L & R Manu.

These powder-coated aluminum brackets feature flexible latches to secure your equipment. Brackets adjust to hold anything from 1" to 1-5/6" dia.