Free Shipping!
Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
0 Item(s)
You have no items in your shopping cart.
-
- Shop Trucks & Trailers
- Shop Apparel
-
Shop Products
- Shop Products
- Towing Straps & Chains
-
Cargo Control
- Cargo Control
- Ratchet Straps & Tie Downs
- Winch Straps
- Flatbed Winches
- Winch Bars
- Transport Chain
- Transport Chain Hooks
- Chain Binders
- D-Rings & Tie Down Anchors
- Cargo Bars, Load Bars & Shoring Beams
- Utility Strap Assemblies
- Safety Flags
- Oversize & Wide Load Signs
- Measuring Sticks
- Cargo Accessories
- DOT Placards & Labels
- HD Truck Accessories
- Ratchets & Hardware
- Rigging & Recovery Supply
- Auto & Truck Service
- Battery Service
- Winch Lines & Hardware
- Towing Accessories
- Lockout Tools
- Tow Lights
- Emergency & Warning Lighting
- Work & Truck Lighting
- Hoses & Reels
- Safety Supplies
- Winches
- Toolboxes & Storage
-
Truck Chassis Accessories
- Truck Chassis Accessories
- Push Bumpers, Guide Lights, & Hardware
- Cameras
- Seat Covers
- Alarms & Horns
- Wheel Simulators & Hub Parts
- Tire & Wheel Supply
- Fenders
- Mico Brake Locks
- Mud Flaps
- Push Bumpers, Guide Lights, & Hardware
- Sunvisors & Mirrors
- Spring & Suspension Enhancement
- Throttle Controls
- Running Boards
- Aftermarket Fuel Tanks
- Mobile Office Vehicle Mounts
- Hitches & Accessories
- Cab Protectors & Truck Racks
- Snow Removal, Dump Bodies, & Lift Gates
- Shop Supplies
- Car Hauler Trailer Supply
- Clearance Products
-
Shop Repair Parts
- Shop Repair Parts
- Car Hauler Trailer Parts
-
Car Carrier Parts
- Car Carrier Parts
- Wheel Lift L-Arms, Outer Crosstubes & Hardware
- Pivot Pin Kits
- Wear Pad Kits
- Control Assemblies & Hardware
- Cylinder & Pin Replacement
- Tail Light Assemblies & Wiring Harnesses
- Hydraulic Valve Bodies & Service Parts
- Car Carrier Winch Repair Parts
- Removable Side Rail Replacement
- Bed Lock Hardware & Tie-Down Anchors
- Carrier Light Pylons
- Carrier Body Lighting
-
Light Duty Wrecker Parts
- Light Duty Wrecker Parts
- WheelLift L-Arms, Receivers & Hardware
- Fender Flares & Fender Flares HD
- Boom End Sheaves, Guides, & Hardware
- Cylinder and Pin Replacement
- Control Hardware
- Control Valve Bodies & Hardware
- Hydraulic Pumps, Outriggers & Repair Parts
- Control Cables & Cable Springs
- Body Lighting
- Wrecker Light Pylons
-
Medium / Heavy Wrecker Parts
- Medium / Heavy Wrecker Parts
- WheelLift L-Arms, Crossbars, Receivers & Hardware HD
- Boom End Sheaves, Guides & Hardware HD
- Cylinder and Pin Replacement HD
- Control Valve Bodies & Hardware HD
- Cable Storage Springs HD
- Remote Controls HD & Control Cables HD
- Body Lighting HD
- Wrecker Light Pylons HD
- Hydraulic Outriggers & Repair Parts HD
- Zacklift Main Body Repair Parts
- Zacklift Inner Main Repair Parts
- Zacklift Horizontal Repair Parts
- Zacklift Grid Head Repair Parts
- Zacklift Mounts & Hardware
- Snow Plow Repair Parts
- Lighting
- Tow Dolly Parts
- Automotive Positioning Dolly Parts
- Hydraulic Hardware
- Electrical Hardware
- Wheel Simulator Repair Parts
- Diesel Emission Products
- Winch Repair Parts
- Toolbox Repair Parts
- Cable & Hose Management Repair Parts
-
Shop by Parts Schematics
Order Direct from a parts diagram
-
- Shop Trucks & Trailers
- Shop Apparel
-
Shop Products
- Shop Products
- Towing Straps & Chains
-
Cargo Control
- Cargo Control
- Ratchet Straps & Tie Downs
- Winch Straps
- Flatbed Winches
- Winch Bars
- Transport Chain
- Transport Chain Hooks
- Chain Binders
- D-Rings & Tie Down Anchors
- Cargo Bars, Load Bars & Shoring Beams
- Utility Strap Assemblies
- Safety Flags
- Oversize & Wide Load Signs
- Measuring Sticks
- Cargo Accessories
- DOT Placards & Labels
- HD Truck Accessories
- Ratchets & Hardware
- Rigging & Recovery Supply
- Auto & Truck Service
- Battery Service
- Winch Lines & Hardware
- Towing Accessories
- Lockout Tools
- Tow Lights
- Emergency & Warning Lighting
- Work & Truck Lighting
- Hoses & Reels
- Safety Supplies
- Winches
- Toolboxes & Storage
-
Truck Chassis Accessories
- Truck Chassis Accessories
- Push Bumpers, Guide Lights, & Hardware
- Cameras
- Seat Covers
- Alarms & Horns
- Wheel Simulators & Hub Parts
- Tire & Wheel Supply
- Fenders
- Mico Brake Locks
- Mud Flaps
- Push Bumpers, Guide Lights, & Hardware
- Sunvisors & Mirrors
- Spring & Suspension Enhancement
- Throttle Controls
- Running Boards
- Aftermarket Fuel Tanks
- Mobile Office Vehicle Mounts
- Hitches & Accessories
- Cab Protectors & Truck Racks
- Snow Removal, Dump Bodies, & Lift Gates
- Shop Supplies
- Car Hauler Trailer Supply
- Clearance Products
-
Shop Repair Parts
- Shop Repair Parts
- Car Hauler Trailer Parts
-
Car Carrier Parts
- Car Carrier Parts
- Wheel Lift L-Arms, Outer Crosstubes & Hardware
- Pivot Pin Kits
- Wear Pad Kits
- Control Assemblies & Hardware
- Cylinder & Pin Replacement
- Tail Light Assemblies & Wiring Harnesses
- Hydraulic Valve Bodies & Service Parts
- Car Carrier Winch Repair Parts
- Removable Side Rail Replacement
- Bed Lock Hardware & Tie-Down Anchors
- Carrier Light Pylons
- Carrier Body Lighting
-
Light Duty Wrecker Parts
- Light Duty Wrecker Parts
- WheelLift L-Arms, Receivers & Hardware
- Fender Flares & Fender Flares HD
- Boom End Sheaves, Guides, & Hardware
- Cylinder and Pin Replacement
- Control Hardware
- Control Valve Bodies & Hardware
- Hydraulic Pumps, Outriggers & Repair Parts
- Control Cables & Cable Springs
- Body Lighting
- Wrecker Light Pylons
-
Medium / Heavy Wrecker Parts
- Medium / Heavy Wrecker Parts
- WheelLift L-Arms, Crossbars, Receivers & Hardware HD
- Boom End Sheaves, Guides & Hardware HD
- Cylinder and Pin Replacement HD
- Control Valve Bodies & Hardware HD
- Cable Storage Springs HD
- Remote Controls HD & Control Cables HD
- Body Lighting HD
- Wrecker Light Pylons HD
- Hydraulic Outriggers & Repair Parts HD
- Zacklift Main Body Repair Parts
- Zacklift Inner Main Repair Parts
- Zacklift Horizontal Repair Parts
- Zacklift Grid Head Repair Parts
- Zacklift Mounts & Hardware
- Snow Plow Repair Parts
- Lighting
- Tow Dolly Parts
- Automotive Positioning Dolly Parts
- Hydraulic Hardware
- Electrical Hardware
- Wheel Simulator Repair Parts
- Diesel Emission Products
- Winch Repair Parts
- Toolbox Repair Parts
- Cable & Hose Management Repair Parts
-
Shop by Parts Schematics
Order Direct from a parts diagram
Looking for apparel? Shop Zip's Outfitters
0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
Collins Dolly Replacement Flat Rail Spring
This is a replacement compression spring for the dolly rails.
$5.99
In The Ditch Replacement Ratchet Strap Speed Dolly
Update worn and tired straps on your In The Ditch Speed Tow dolly with this replacement strap. The black strap includes a ratchet and coated S-hooks for proper securement of a tire to the tow dolly.
$23.29
In The Ditch Breakover Bar
Note: Special Handling Fees Apply
This lightweight Breakover Bar from In The Ditch was designed to work with a Speed Dolly and XD Dolly. It has a soft grip handle, and it is the lightest dolly bar on the market.
This lightweight Breakover Bar from In The Ditch was designed to work with a Speed Dolly and XD Dolly. It has a soft grip handle, and it is the lightest dolly bar on the market.
- Lightweight hollow tubing
- CNC-machined solid steel end
- Soft grip handle
- Length produces leverage
$55.99
In The Ditch Locking Pin for Simple Mounts
This is a locking pin for the simple mounts for In The Ditch.
$12.99
In The Ditch Replacement XD Dolly Spindle Assembly Right Hand
This replacement Right Hand XD Dolly Spindle Assembly from In The Ditch includes a spindle, side plate, pivot axle, and installation guide. It is used on XD Dollies from In The Ditch.
$61.99
In The Ditch Replacement XD Dolly Spindle Assembly Left Hand
This replacement Left Hand XD Dolly Spindle Assembly from In The Ditch includes a spindle, side plate, pivot axle, and installation guide. It is used on XD Dollies from In The Ditch.
$61.99
In The Ditch Replacement Speed Dolly Spindle Assembly Left Hand
This replacement Left Handle Speed Dolly Spindle Assembly from In The Ditch includes a spindle, side plates, pivot axle, and installation manual.
$74.99
In The Ditch Replacement Speed Dolly Spindle Assembly Right Hand
This replacement Right Hand Speed Dolly Spindle Assembly from In The Ditch includes a spindle, side plates, pivot axle, and installation manual.
$75.99
In The Ditch Wheel Hub Assembly Replacement
Prolong the life of and prevent maintenance issues on your In The Ditch Speed Dolly with this replacement 4 on 4" cast hub and bearing assembly. 1250-lb. capacity when assembled. This hub is for the SLX (Greaseable) style dollies. These are NOT interchangeable with the XL (Sealed Hub) dollies
$61.99
In The Ditch Spindle Washer, 1"
This 1" Spindle Washer from In The Ditch is for the hub assembly on a Speed
Dolly.
$1.49
In The Ditch Stainless Steel Snap Button Aluminum Axle
This is a replacement custom snap button for the Speed Dolly aluminum
telescoping axles by In The Ditch. This button is made from stainless steel to
help prevent against corrosion.
$19.99
In The Ditch 4 Lug Aluminum Wheel Rim
This machined-aluminum wheel is an exclusive design from In The Ditch. The rim is a replacement part for the ITD Speed Dolly and has met all of the DOT requirements.Rim comes with a high pressure valve stem installed.
$74.99
In The Ditch Tire w/ Aluminum Wheel
This machined aluminum wheel is an exclusive design from In The Ditch. The rim is a replacement part for the ITD Speed Dolly and has met all of the DOT requirements. Rim comes with a high-pressure valve stem installed.
$192.99
In The Ditch Lug Nut Acorn Style Chrome
This Chrome Acorn Style Lug Nut from In The Ditch is for both aluminum and steel wheels.
$2.59
In The Ditch Bearing and Race, 1"
This replacement 1" Bearing and Race from In The Ditch has a 1,250 lb. capacity. It is used on Speed Dolly 4 bolt hubs.
$23.99
In The Ditch D Type Spindle Washer SLS
This D-Type Spindle Washer is for use with the Speed Lube Spindle Speed Dollies from In The Ditch.
$2.59
In The Ditch Spindle Jam Nut SLS
This Spindle Jam Nut is for use with the Speed Lube Spindle Speed Dollies from In The Ditch.
$2.59
In The Ditch Spindle Nut Retainer SLS
This Spindle Nut Retainer is for use with the Speed Lube Spindle Speed Dollies from In The Ditch.
$9.89
Related products
Chevron Pin and Link Assembly
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
$33.99
Miller 6.5" Thrust Washer Century / Challenger / Holmes
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
$12.99
Miller Inner Boom Bushing
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
$86.99
Handle Bracket
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
$39.99
Ramsey Seal Kit
This gasket and seal kit is for the H-200 series Ramsey winch with the " keyhole style " worm gear housing cover.
$73.99
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Miller Grommet, Rubber, Century and Vulcan Wreckers
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
$2.99
Washer, Flat 5/16" Stainless Steel 18-8
Fastenal 5/16" 18-8 stainless steel small OD flat washer.
$0.09
Miller Composite Bell Crank
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
$13.29
Chevron Pin and Link Assembly
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
$33.99
Miller 6.5" Thrust Washer Century / Challenger / Holmes
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
$12.99
Miller Inner Boom Bushing
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
$86.99
Handle Bracket
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
$39.99
Ramsey Seal Kit
This gasket and seal kit is for the H-200 series Ramsey winch with the " keyhole style " worm gear housing cover.
$73.99
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Miller Grommet, Rubber, Century and Vulcan Wreckers
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
$2.99
Washer, Flat 5/16" Stainless Steel 18-8
Fastenal 5/16" 18-8 stainless steel small OD flat washer.
$0.09
Miller Composite Bell Crank
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
$13.29
Newsletter
Information
Product Support
Customer service
Copyright © 2025 Zip's. All Rights Reserved. Seller reserves the right to adjust prices or correct errors. Privacy Policy
