Search

Boom End Sheave for Holmes 600 & 500 Boom Ends. 6" sheave with 1 3/16" diameter pin size.

This is a Boom End Sheave for a Holmes 750 Wrecker. It is 8" in diameter with a 1-3/8" pin size diameter.

This is a replaceable sheave for the SP20000.

Jerr-Dan SD wrecker sheave pin.

Jerr-Dan SD wrecker sheave support.

This is a replacement sheave pin that holds the sheave in place for the Main Body Boom Head.

This is a replacement outer boom head pin for the sheave. The pin holds the sheave to the rest of the boom head, also allowing the sheave to spin in place.

This pin holds the sheave pin in place on the center boom head. Allowing the sheave to spin.

This is a 2 Groove small sheave for the hydraulic hoses on the outer stinger weldment for a Vulcan 807/810, Century 300 Series, and Holmes 440SL by Miller Industries. See brochures for reference chart and see Features for related parts.

This is a replacement sheave shaft weldment for the Holmes 750.

Zacklift cablel guide with a 6" diameter sheave accommodating up to 3/4" cable. The zacklift cable guide can be used in conjuction with any deck winch. The guide mounts on top of the main vertical section of the Z18 Zacklift.

Zacklift cable guide with a 6" diameter sheave accommodating up to 3/4" cable. The Zacklift cable guide can be used in conjunction with any deck winch. The guide mounts on top of the main vertical section of a Z403 Zacklift.<BR<BR *This item is available only with an accompanying order of a complete Zacklift unit, which can be found in the Zacklift Underlifts subcategory.

Zacklift cable guide with a 6" diameter sheave accommodating up to 3/4" cable. The Zacklift cable guide can be used in conjunction with any deck winch. The guide mounts on top of the main vertical section of a Z303 or Z30 Zacklift.

These are the roll pins for the sheave boom yoke shaft on the Midnight Express by Miller Industries. Click on the brochure tab for a reference chart.

The snap ring is used to help hold the sheave pin in the boom head hold the sheave in place.

This Bushing is used on a 6" Miller Boom End Sheave,

Fiber Core Cable offers greater flexibility, less wear on the sheave wheels, and provides a lubricant reservoir. When pressure is exerted on the working cable, the core gives off lubricant to minimize the wear of wire on wire - assuring longer service life.

50,000 lbs. Planetary 2-Speed, Drag Winch with 3/4" x 250' Cable w/Release Tensioner & Sheave Head.

35,000 lbs. Planetary 2-Speed, Drag Winch with 5/8" x 200' Cable w/Release Tensioner & Sheave Head. As Factory.

50,000 lbs. Planetary 2-Speed, Drag Winch with 3/4" x 250' Cable w/Release Tensioner & Sheave Head.

Dual 35,000# Planetary 2-Speed, Drag Winch with 5/8" x 200' Cable w/Release Tensioner & Sheave Head.

Snatch blocks from SafeAll serve as essential rigging and recovery tools for a variety of industries. The pulley, sheaves and swivel hook combine to provide a critical pivot point to change the angle and direction of a pull or increase the winch capacity under a load. Strength-tested for durability, these snatch blocks can be used in off-road recoveries, towing scenarios and material handling.

Snatch blocks from SafeAll work great for a variety of applications. They consist of a single pulley or sheave protected by two outer teardrop-shaped side plates. A release pin with a cotter key sandwiches the plates together over the pulley. Remove both to access the inner pulley and insert the winch line.

The boom end assembly guides the cable from the winch off of the end of the boom. This assembly comes complete with the yoke, sheave wheel, cable guide and pin. This is designed for the Century light duty wrecker models 411, 412, 601, 602. Fits the 611 and 612 2000 year model and older. This boom end will also fit on Challenger 4300 Series and Holmes 440, 552 and DFT 650 Series Wreckers. See Brochures for part schematics and Features to see what models with boom end will fit.