Mold Boards & Deflectors

Please Note: Product Discontinued - ALL SALES FINAL!

This Side Winding Universal Jack from SnowDogg is used on the Moldboard Assembly of several of their snow plows. These include CM, HD/EX, MD, TE, VMD, VXF, SKTE and XP Series Plows.

Note: Special Handling Fees Apply for Specific Items

These SnowDogg Deflectors from Buyers Products are an essential safety accessory for snow plows. Deflectors control the snow spray from hitting the driver's windshield. They also allow for a higher speed of travel and they efficiently stack the snow. Choose your side and model and get your deflectors ordered today!

• Choose Drivers or Passenger Side
• Choose your snow plow model

This is a SnowDogg shoe kit.

SAM 3/4 Inch Bolt On Blade Guide Kits with single bolt. Kits include 2 guides and mounting hardware.

This is a SnowDogg plow shoe assembly, MD.

Buyers Products 3/4" Stud Mount Bumper Guides have more surface area than conventional markers for better visibility. Use them on your plow or bumper to help you judge distance and avoid hidden obstacles. Sold in pairs, the 3/4 in. tubes are made of low temperature fluorescent orange nylon and are available in lengths up to 36 in. Vertical mounting hardware is included.

This replacement Shoe from Buyers Products is used on VXF/VXFII, VMD/VMDII AND SKTE Series Snow Plows.

This is a SnowDogg pin, plow shoe, for CM, MD, XP and SKTE series snow plow.

This replacement Shoe from Buyers Products is used on HD/HDII, EX/EXII, TE/TEII, XP/XPII and CM Series Snow Plows.

Moldboard only for the following snow plows VXF85II and VXF90II.

Buyers Products patented Illuminated LED Guides make it easier to your snow plow or truck bumper in low visibility situations. Wheth er it's the dead of night or the middle of a blizzard, the light-up guides give you superior control over your equipment. Their uniq ue look is also an eye-catching way to stand out from the competition.The wire harness is 12 ft per side with a pre-terminated male bullet connector and ring terminal to connect to the guides. Installation is easy and only requires a few basic tools for wiring and routing the cables. The LED guides are compatible with most snow plows and bumpers. An optional horizontal mounting bracket is also available, which may be required for installation on some plows

This is a SnowDogg trip pin kit(Pair), HD/HDII, EX/EXII and XP/XPII

Please Note: Product Discontinued - ALL SALES FINAL!

This is a Buyers trip pin kit (pair),MD/MDII.

This is a universal SnowDogg spring, trip.

No more lifting. With the pull of a pin the wings can be rotated behind the plow for transport between job sites. Protected against overloads. The same pin used for stowing also acts as a shear pin to prevent expensive damage to the wing and your plow. Torsion locks prevent the wing from twisting when plowing but still allow for easy stowage.

This is a SnowDogg snapper pin. Pedal and jack.

This is a SnowDogg chain, it is 24 links and measures 5/16 x 27.

SAM Curb Guards are formed from heavy duty 1/2 in. or 5/8 in. steel, and fit most 9 ft and all 10 ft plows. They have a highway punch plate pattern.

This is a SnowDogg hdw kit, moldboard.

This is a 3/8" x 60" wing cylinder hose.

This is a moldboard for the following snow plows: TE75II, TE80II, TE90II, SKTE75, SKTE80, SKTE90

These are replacement SnowDogg washers, they are for plow shoes, and for CM, SKTE, MD and XP series snowplows.

This is a SnowDogg pivot bolt with grease fitting.

This SnowDogg push bar is to be used on the SnowDogg Moldboard frame.

Blade guide kit 27" in length. Comes in red flat base color and sold in pairs. S.A.M.

Buyers SnowDogg wing kit VXF/VXFII snow plow.

This is a SnowDogg hose, wing retract, it measures 3/8" x 13" xp.

This is a SnowDogg shoe assembly, standard western with washers and pin.

These are SnowDogg trip angles for the driver/passenger side.

New OEM Boss Snow Plows Straight Kick Stand Leg Part Number: STB03220 Fits RT2 and RT3 Model Full Size Straight Blade Plows Not Compatible with Sport Duty Plows Genuine Boss. S.A.M.

Note: Special Handling Fees Apply for Specific Items

This is a SnowDogg moldboard for EX80II, EX85II, or EX90II.

Snowdogg Jack Replacement Cap.

Snow-Way blade guild kit 24" S.A.M.

Driver Side, Protects your snowplow from damage caused by contact with curbs, Easy to intall on any plow with "highway punch plate pattern" holes, Constructed of heavy-duty 1/2" steel, Fits most 9' plows and all 10' plows. Dimensions: 1/2" x 6" x 12.26".

This is a moldboard for the following snow plow HD75II, and HD80II.

This is a SnowDogg spacer for plow shoes for MDII/HDII/EXII/CM.

This is a SnowDogg hitch pin with cotter for plow wings.

This is a SnowDogg clevis pin, kit, trip angle.

This is a Curtis blade marker (orange). S.A.M.

This is a pair of plow accessories blade guide kit 3/4" x 28" (B2028). S.A.M.

This is a replacment Western shoe assembly casting. S.A.M.

Buyers SnowDogg VMD/VMDII and VXF/VXFII plow shoes bracket.

This is a SnowDogg pivot bolt washer, for CM, HD, TE, EX, XP.

This is a SnowDogg plastic moldboard cap, for MD/MDII.

This is a SnowDogg pivot and angle nut, for HD, EX, TE, XP, CM and SKTE.

Buyers nylon marker. S.A.M.

Replacement for a Fisher snowplow trip spring. S.A.M. SPRING ONLY

Buyers Products Torsion Ramp Spring acts as a "lift assist" for ramps that require manual deployment. Driver and passenger coils. S.A.M.

This is a SnowDogg TE/SK driver side or passenger side wing assy.

Boss Snowplow curb guard for driver side or passenger side. S.A.M.

Snowdogg shock absorber.

To keep the snow in front of your plow the TE80 comes with a trip edge mechanism to make sure you get the most out of your plowing.

This is a SnowDogg plastic moldboard cap.

Western guide replacement flag. S.A.M.

Blade guide kit. S.A.M.