Rigging & Recovery Supply

B/A's recovery straps are the premier straps in the industry. Made from double ply webbing, they offer the best in strength, yet this soft pliable webbing conforms and supports the load - making your recovery job easier. All straps are made with heavy duty polyester and have lined eyes for superior wear protection.

Grade 100 coupling links from Zip's are the preferred choice to attach hooks to chain. See the drop-down menu for available sizes and working load limits.

Zips Recovery Straps offer strength while also conforming and supporting load. This creates an environment for easier and more efficient recoveries. The sewn cordura sleeve offers added protection against tears and abrasions.

Grade 100 Chain is produced from special alloy steel and has a gray protective coating. Grade 100 chains have a 25% higher work load limit compared to Grade 80. Chain meets or exceeds NACM, ASTM and OSHA specifications. Grade 100 is approved for overhead lifting.

These grade 80 chain assemblies come equipped with a Grab Hook connected on each end. Some standard uses for this assembly are chain to chain hooking, equipment safety, tie-down, over-the-road safety and vehicle stabilization.

These Snatch Blocks from Yoke come with a Swivel Hook and Heavy Duty Latch. Yoke snatch blocks are manufactured from the highest quality tensile steel. Bronze bushings and grease fittings allow for ease of use and extended sheave life. All blocks are 100% Magnaflux tested and are supplied with a model number, wire rope size, working load limit and usage warnings.

Cradle grab hooks from Zip's are made from Grade 100 high-strength alloy steel and are approved for overhead lifting. A clevis pin allows for attachment to chain, and the size and grade are stamped on the side of the hook. See the drop-down menu for available sizes and working load limits.

The container eye link is intended to be used in the corner eyes of shipping containers as an attachment point for rigging to assist in up righting overturned containers. By using a shoulder bot, nut and pin, it becomes a terminal connections. This link is a must for any situation involving an overturned shipping container! The working load limit is 35,300 lbs with a 4:1 safety factor.

These Grade 100 Chain Assemblies are 2' long with an oblong link attached at one end and a foundry hook on the other end. Grade 100 chain is made from alloy steel and is extremely strong, 25% higher work load limit than grade 80, making it ideal for recovery or lifting.

Container Slings from RimSling can be used in a variety of ways to move, load and organize shipping containers around a dock, in a storage facility or between customers. The sling's flexible, narrow profile can slip through the container's corner pocket, and the 6" spliced eyes can be brought back together for a basket lift of up to 37,040 lbs. A special rubberized guard is also available to slide to the lift point to prevent unnecessary wear and stress to the sling.

These grade 80 chain assemblies come equipped with a Cradle Grab Hook connected on each end. Some standard uses for this assembly are chain to chain hooking, equipment safety, tie-down, over-the-road safety and vehicle stabilization.

Grade 100 oblong links from Zip's can be used to create chain assemblies. See the drop-down menu for available sizes and working load limits.

Variety of sizes of shackles make it easy to have the right size when you need it.

Use this aluminum Tailboard Transformer to install a snatch block into the tie down slot of your carrier bed. Drop it into any hold in your carrier bed and use it to change the direction of your pull. The Tailboard Transformer is best used for performing recovery operations such as one lane parallel uprighting. Designed as a terminator and as a retainer pin.

Grade 100 bulk chain from Zip's is sold by the foot and available in six sizes. The chain is made from alloy steel and protected by a special gray coating. The chain meets or exceeds NACM, ASTM and OSHA specifications and is approved for overhead lifting. See the drop-down menu for available sizes and working load limits.

These are a synthetic soft shackle made by the makers of RimSling. These soft shackles are the perfect replacement in place of traditional metal shackles. These soft shackles don't need any tools and is easy to open and close. They are light and their soft properties will not damage paint. These shackles do not corrode or rust making them outlast any metal shackles. These soft shackles have many different applications on the rigging and recovery scene. Any place you can use a metal shackle you will be able to use this soft shackle just as efficiently. These Soft Shackles are available in 5/16", 3/8", 7/16", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8" and 1-1/4".

Corner protectors are a must for all straps that contact loads. A seemingly dull edge can become a knife when the strap is put in tension. This part can be used to replace Part Numbers: 270412, 270SLEEVE, 38-CP4.

Grade 80 coupling links from Zip's are the preferred choice to attach hooks to chain. See the drop-down menu for available sizes and working load limits.

These Grade 80 Chain assemblies include a Grab Hook at each end for length adjustability.

Maximize the recovery capabilities of your car carrier rollback, light duty wrecker, or medium duty tow truck with the In the Ditch SP9000 Sidepuller. This is a SP9000 Sidepuller that is designed for those who want a more customized installation. Zip's provides you with the sidepuller, from In the Ditch, with everything except the valve body and hydraulic hoses. This gives you the option of providing your own custom hydraulic controls. Typically this application is for those who order their carrier or wrecker with factory installed sidepuller controls. When you order this SP9000 sidepuller it will come with the following: Center Recovery Boom Head, Outer Removable Recovery Boom Head, Light Bar Mounting Base, 9,000 lb Winch with Tensioner Plate, Winch Free Spool with Easy Reach Handle, 3/8" x 100' Wire Rope, Adjustable SP Mounting Base, Installation Hardware, Painted Tuff Coat Gloss Black Finish, Polished Stainless Steel Rear Panel, Decal Package, Operation Manual (also available online), and it will come on a shipping stand. To view a specifications sheet and operations manual, click on the brochure tab. Click on the video tab to see more about this amazing product.

Note: Special Handling Fees Apply for Specific Items

Bolt Style Shackles offer the safest way to connect a web shackle to a recovery strap. By adding the nut and bolt feature it now provides added peace of mind when using the web shackles for normal recovery or accidental side loads.

Zip's Snatch Block Storage Bracket. Designed specifically for the snatch blocks to be stored by the hook. The bracket can typically store up to 4 blocks at a time. 17.5" Long. Heavy Duty Aluminum Construction. Bolt-on installation.

Grade 80 grab hooks from Zip's include the clevis and cotter pint to attach to your chain. The size and grade are stamped on the hook. See the drop-down menu for available sizes and working load limits.

Screw pin anchor shackles from Zip's are made from forged alloy steel and feature an open throat design that requires no tools to operate. The shackles are available in seven sizes and are stamped with the size and capacity. See the drop-down menu for available sizes and working load limits.