Rigging & Recovery Supply

Cradle grab hooks from Zip?s are made from Grade 100 high-strength alloy steel and are approved for overhead lifting. An eye loop allows for attachment to chain with a master link. The size and grade are stamped on the side of the hook. See the drop-down menu for available sizes and working load limits.

The Green Pin Snatch Block HK is a light-weight snatch block type 601HK with a hook attached. The snatch block has a smooth, uninterrupted pull due to the conical roller bearings. The coating of the Green Pin Snatch Block HK ensures long-term durability, even under harsh conditions. It is available in a range with a working load limit from 2 up to 15 ton.

This is the same strap that is included in the Cruse Loop Package; used to recover unibody vehicles. This 4" x 30' recovery strap is used to recover uni-body vehicles. The technique was created, developed and tested by its inventor Donnie Cruse in the late 1980's and over the last 30 years has become one of the most widely used recovery techniques for passenger vehicles. When used correctly this technique can recover a vehicle without causing any damage to suspension components or tie down slots. The step by step application guide book explains the procedure in detail. WreckMaster highly recommends that only trained and qualified operators use this product.

When you’re performing an overhead lift, you need to trust your coupling links. This particular link is made of grade 100 steel. That adds to the amount of strength that this coupling has. Plus, even the smallest of these links (check the chart for the rest of them) has a WLL of 5,700 pounds, meaning that you can be sure no job is too big for this link.

Kuplers act as a connection device between master links and chain legs. Resembling a shackle in appearance, they provide high strength connection. Alloy steel.

When you buy a strap, you want to make sure it’ll last. That’s why the two-ply All-Grip Recovery Strap with Cordura Edges was designed to be as durable as possible. With eyes that are reinforced with abrasive-resistant material, you can count on them holding up no to sharp edges and tears. Plus, it can handle up to 68,200 pounds depending on the hold. Check the drop-down menu for more information.

The highly durable 12" Steel Triangle is an excellent addition to nearly any type of vehicle recovery job. Offering optimal reliability for where you need it the most, this durable piece of yellow zinc steel is more than capable of providing you with exactly the kind of strength you need to get the job done right. It can easily handle a working load limit of 32,000 lbs., making it a great tool to have around for the vehicle towing job.

Made in the USA the All-Grip Medium Duty Endless Loop Round Sling Kit is great for a variety of lifts. Eight different slings are included, each of them color-coded to signify their working load limit. Plus, they are made of polyester fibers that are protected by a double-web thick sleeve.

Getting a hook on a chain can be a hassle. With this hook's clevis connector, you can quickly attach it to a chain. This saves you time as you can simply slide the chain in place and insert the clevis pin. This added efficiency only saves you money by allowing your workers to get on to the actual task at hand.

The McKissick Snatch Blocks Model 420 Champion has an opening feature that allows the rope to easily be inserted without reeving. It also allows you to do so while it is suspended. You can also count on it as it meets or exceeds all requirements of ASME B30.26. Finally, it’s convenient as it comes with a latch installed.

Available in a variety of diameters and lengths, our affordable wire rope slings can be used for a variety of applications. From recovery work to lifting, these steel core slings are a great addition to your tool box.

Sling hooks from Zip?s are made from Grade 100 alloy steel and are approved for overhead lifting. An eye loop allows for attachment to the chain with a coupling link, and a spring latch provides a secure connection. See the drop-down menu for available sizes and working load limits.

Zip's 48" wooden recovery stick features an angled end for optimal positioning.

These All-Grip Wire Rope Eye & Eye Slings are also known as wire rope chokers. They are fabricated from extra improved plow steel (EIPS) which is a tough, durable steel combining great strength with high resistance to fatigue with less vulnerability to damages from edges. These wire rope slings have spliced eyes at each end and they are all made in the USA. Eyes are formed using a Flemish eye splice and swaged sleeve. Available in diameters of 3/8" through 1", these cable slings can be used in a variety of vertical lifting and rigging scenarios.

SafetyTech is a high load capacity outrigger crane pad with a vertical load bearing capacity of up to 140,000lbs* for our largest size. It is designed to fully support vehicles and cranes without warping, splintering or bending and the pad features a safety textured tread surface to further improve grip and stability. SafetyTech is manufactured from a highly durable proprietary engineered thermoplastic material which provides exceptional support. It is non-conductive, non-magnetic, and resistant to temperature, chemicals, water, and oil. SafetyTech features high visibility safety orange patented TuffGripr handles ensuring optimum maneuverability and will return to normal after bending, retaining its original shape. *Load bearing capacity is subject to ground conditions. Sizing is subject to a manufacturing variance of +/- 5%.

Self-locking hooks are on the rise. Ensuring that your load can’t escape without you being in total control, these hooks are the safer option. This hook in particular is made of quenched and tempered grade 100 steel. This ensures it is durable and reliable, thereby preventing any potential accidents.

This is a 5/8", Grade 100 chain kit by B/A. This kit includes (2) 10' long chains and (2) 15' long chains. Both sets of chains have cradle grab hooks on each end.

When all the weight will rest on one link, that link better hold up. Not only is this master link made of alloy steel but it’s also quenched and tempered. This has exponentially increased its strength and durability. As a result, this master link can handle whatever you put it through with ease.

These Clevis Style Grab Hooks have a supporting crossbar formed into the hook to "cradle" the chain for added safety and durability. It comes with the clevis pin and roll pins.

This grade 80 Crosby Coupling Link is proof tested 2.5 times its working load limit, making it extra reliable. Not only is it reliable, it’s highly durable. Made of quenched and tempered alloy steel, this coupling link meets ASTM A-952-96 standards. Finally, no special tools are needed to use or assemble this coupling link, making it extra convenient.

These Grade 100 Chain Assemblies come with a Twist Lock Cradle Grab Hook attached to each end of each chain. B/A's patented Twist Lock design is easy to install and easy to use. It has the most secure latch on the market which prevents accidental release of the chain from the hook connection and inadvertent re-hooking. Grade 100 chain is made from alloy steel and is extremely strong, 25% higher work load limit than grade 80, making it ideal for recovery or lifting.

The Zips/Sava High Pressure Lift Bag Kit is used to lift the heaviest loads. This bag kit use maximum force in concentrated areas allowing for the user to work in tight spaces.

The most complete package for those heavy recoveries. Includes two recovery straps, 4 wear pads and the WreckMaster Wrinkle.

These 1 Ply Flat Eye Sling Straps have a Sewn Eye Loop at each end of the strap. These recovery straps are used for lifting and recovery on scenes of accidents. They have multiple rigging options which include vertical rigging, choker rigging, and basket rigging.